ASSEMBLY AND MOUNTING INSTRUCTION
For 31919
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and
identify all parts prior to building the unit. Each part is identified on the drawingfor reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item
for any reason. Please repack the unit using the original c
arton and inserts.
TEP 1:Unpack all the parts and Classify them
TEP 2: Make sure the power is turned off at
TEP 3: Use the wire nuts to connect the
t;
TEP 4: Secure the canopy to the ceiling
TEP 5:Install the Loop to the fixture;
TEP 6: Buckle the quick link to the loop;
TEP 7: Attach the glass shade to the fixture
TEP 8: Install the correct bulb (not provided);
Check r i ng
Gl ass Shade
Check collar
Bul b
Frame
assembl i ng
S
according to the illustration shown at the side.
Place the parts on a scratchfree surface;
S
the junction box where the fixture is to be
installed. Secure the cross bar to the ceiling
junction box using junction box screws;
S
positive and negative wires. connect the
ground wire to the junction box ground por
S
with the knurled ring.
S
S
S
and fix it using the check ring and the Socket
ring;
S