Delta 138265 Installation guide

Type
Installation guide

This manual is also suitable for

Tilting Mirror Rubber Bushing Installation
1.) Remove both posts from the arms on the ends of the bracket on the mirror.
2.) Slide a rubber bushing onto the end of each arm on the bracket. The rubber bushing needs to be
positioned on the back half of the arm.
3.) Slide the post onto the arm and ensure the rubber bushing fits inside the post and creates a
tight fit. It may be helpful to rotate the post slightly to slide the post over the bushing.
  • Page 1 1

Delta 138265 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI