Global Industrial 293224 User manual

Installation Instructions

Bellows Package for Power Scissor Lift Table for Model

293223, 2932234, 293225, 293226, 293227, 293228, 293229

1. Power Lift Table (with bellows):

2. Installation diagram of bellows：

Parts Diagram (Qty differs from model no.)

DESCRIPTION

QTY

DESCRIPTION

QTY

TYYY

Power lift table

Plat washer 6

8 or 12

Bellows

Hexagon socket screw M6

×1

8 or 12

mounting plate of bellows

4 or 6

Outer hexagon bolt M6

×1

4 or 6

3. Installation procedure：

3.1 Raise the power lift table to the highest position, put down the safety rod,

and cut off the power supply.

3.2 Fix the #3(mounting plate of bellows) on the base of power lift table with

#6(outer hexagon bolt).

3.3 Put #2(bellows) above of power lift table, adjust its length and width, then

insert it downward.

3.4 Fixed the upside of #2(bellows) via #4(flat washer) and #5(hexagon socket

screw) on the platform of power lift table.

3.5 Turn back the safety rod.

3.6 Fixed the down side of #2(bellows) on the #3(mounting plate of bellows) with

#4(flat washer) and #5(hexagon socket screw).