Kogan KAKIDINCMRA User guide

Brand: Kogan

Model: KAKIDINCMRA

Type: User guide

This manual is also suitable for

KAKIDINCMRA, KAKIDINCMPA KIDS Instant Print Camera

Kogan KAKIDINCMRA lets kids capture special moments with ease. It features instant printing, dual camera lenses, various filters and effects, and the ability to record videos. It uses thermal printer rolls for black and white printouts and saves color photos to the microSD card. The camera has a rechargeable battery, and it comes with two rolls of thermal paper and a set of stickers for decoration.

KIDS INSTANT PRINT

CAMERA

KAKIDINCMRA, KAKIDINCMPA

WARNING:

CHOKING HAZARD

- Small parts.

Warning!

Not for children under 3 years. Contains small parts.

Warning

• As small parts are included, it is not suitable for children below 3 years old.

• Keep away from fire sources when using.

• Children should be supervised by an adult when using this device.

• The device should only be charged by an adult or under the supervision of an adult.

• The charger is not a toy. Ensure the device is charged only with an 5V/2A USB adapter.

• Ensure the charging cable is disconnected before cleaning the camera.

Attention

• The built-in 3.7V battery cannot be removed or replaced. If it is damaged, please

contact Kogan.com for support assistance.

• Please keep in mind, despite the colour images and filters, this device performs black

and white thermal printing only. The photos saved to the microSD card will retain all

colour.

• Due to thermal printing technology, the print-outs are not archival quality and will

degrade over time. For the prints to last longer, store away from heat or direct sunlight.

Note:

• The thermal printing paper rolls supplied by Kogan.com (provided with this camera and

additional rolls sold separately) are BPA-free to ensure a safe product for children. We

recommend only using these BPA-free rolls.

• The camera will not turn on when the reset switch is set to ‘OFF’ position. When reset

function is used, switch to ‘OFF’ and then back to ‘O N ’.

SAFETY & WARNINGS

• Instant print camera

• x2 BPA-free rolls of thermal printer paper (57mm x 25mm)

• Sticker set

• Coloured marker pens

• USB-C charging cable

• Lanyard

COMPONENTS LIST

Front:

Rear:

OVERVIEW

To p of camera, below safety cover:

1 Front lens 9 Photo/Video switch

button 17 Flash/Light

2 Display 10 OK button 18 Printer output slot

3 Settings button 11 Down button 19 Pull tab

(for paper compartment)

4 Power (on/off) button 12 Playback button 20 Paper compartment

5 Print button 13 Shutter button 21 Charging port (USB-C)

6 Front/Rear lens

switch button 14 Rear lens 22 Reset switch

7 Indicator light 15 Speaker 23 microSD card slot

8 Up button 16 Microphone

Note:

The camera will not turn on when the Reset switch (22) is set to ‘OFF’ position.

When reset function is used, switch to ‘OFF’ and then back to ‘ON’.

Loading the printer paper

Use the pull tab to open the paper compartment. Insert the roll of thermal printer paper

(57mm x 25mm) into the paper compartment, ensuring the roll is facing the same direction

as shown in the image below (rolling under then back from above).

Fit the roll so some of the paper is feeding out through the slot, then close the paper

compartment and tear off the excess paper exposed on the outside.

Installing microSD card

The SD card slot is below the safety cover at the top of the camera. This device will not work

with a card above 32GB capacity. To eject the card, push inward.

Charging the camera

Insert a USB-C cable into the charging port at the top of the camera (below safety cover),

and connect the other end into a USB power adapter (5V/2A). Once power is connected, the

camera will begin charging.

The indicator light is Red while charging is in progress, and will turn off when fully charged.

The camera will give a low battery prompt when further charging is required.

Powering on

Once fully charged, press the Power button once to turn the camera on. By default, it

will start in Photo mode, with the rear lens.

GETTING STARTED

Correct direction for thermal paper roll

Note: If you do not want every photo to print, press the Print button until the ‘print’ icon

does not appear on the display. In this setting, photos can only be printed manually

from the Playback menu.

Instant printing

• Press Print button until the ‘print’ icon appears on the display screen.

• Press the Shutter button to take a photo. In this setting, the photo will

immediately print out.

Printing from playback menu

• Press Playback button to enter playback menu.

• Press Up/Down buttons to select previous images.

• Press Print button to print selection.

OPERATION

Print icon

on display

Print button

Playback button

Shutter button

Switching front-facing and rear-facing lens

• Press the Front/Rear lens switch button to switch the active lens.

• Press Playback button to review photos taken with the rear-facing lens.

Recording video

• Press Photo/Video switch button to enter Video mode.

• Press Front/Rear lens switch button to switch the active lens.

• Press Shutter button to begin recording. Press Shutter button again to save the

video and stop recording.

• Press Playback button to view recorded videos. Press the Shutter button

to play the video in the Playback menu.

Filters

Press the Up/Down buttons to cycle through different filter options. Filters overlay a fun

scene or border to your image, with different options available between front and rear

cameras. To quickly return to default (no filter) option, press the Front/Rear Lens switch

button twice, to swap quickly back to the current lens with no filter.

Note that while the full colour of the scenes/filters will be saved to the SD card (and

exportable to other devices in this format), the printer will only print black and white.

Delete

• Press Playback button to enter playback menu. Press Up/Down buttons to

select saved images or videos.

• Press Settings button to bring up the Delete option. Use the Up/Down

buttons to select ‘OK’ or ‘Cancel’.

• Press OK button while ‘OK’ is selected to delete the selected image or video.

Reset

If the camera becomes non-responsive or shows difficulty operating, the Reset switch acts

as a manual override to turn the power completely off and then back on. Slide the Reset

switch to ‘OFF’, then slide back to ‘ON’ before pressing the power button to turn the camera

back on. If the switch is left set to ‘OFF’, it will not turn on.

To access the settings menu, press the Settings button .

Use the Up/Down buttons to navigate the different menu options, and press OK button

to enter the selected submenu to edit the settings. Press OK button to confirm selection and

exit the submenu.

To exit without saving, press the Playback button .

Print shade

Select from High, Medium or Low to adjust the depth of the print-outs. Low setting has a

lighter print out, High setting is darker.

Resolution

Select between HD (high definition) or FHD (Full high definition) for the recording resolution.

The higher the resolution, the more space on the memory card this will use.

Delay photo

Also known as an auto-timer or self-timer, this allows the user to set a delay between when

the Shutter button is pressed and when the photo is taken. Select between 3 seconds,

5 seconds, or 10 seconds. To disable, select Off.

Three photos

Also known as burst shots, this takes and saves 3 photos within approximately 2 seconds.

Cyclic record

This setting applies to video mode only. When enabled, this allows videos to continuously

record while saving as short clips. Select between 3 minute, 5 minute, or 10 minute intervals.

When video is recording, the device will automatically save the current video and begin

recording the next once the selected time has passed. This is ideal for recording long videos

indefinitely, without needing to manually stop and save clips. It also ensures smaller, easier

to manage files rather than one long clip.

Scene

Scenes will overlay a colour across the image, allowing for enhanced detail in low-light and

sunny conditions. Select between Auto (default), Sunlight, Cloudy, Tungsten, or Fluorescent.

Filters can be applied over scene settings.

Purikura

“Purikura” refers to the Filters, as described in the Operation section. Here they can be set

manually, as a list from 1 - 35.

SETTINGS

Photo zoom

When enabled, the rear-facing camera will be set in zoom mode, allowing items further in

distance to be seen from the lens.

Date tag

When enabled, this will save the current date and time onto the photo as it is taken. Date

tags cannot be added or removed from photos that have already been taken. To adjust the

date and time information, refer to Time Setting option.

Beep sound

Select the volume of the buttons/functions. Choose between high volume, low volume or off

(silent) options.

LED flash

Set the mode for the camera’s rear-facing flash/light, selecting between Off, On, or Always

On. Always On allows the light to stay on as long as the camera is powered on, even when

not taking photos or video.

Time

Set the device’s year/month/day/time data.

Auto Power Off

When set, the camera will automatically power down after not being used for the set time

(select between 3, 5 or 10 minutes). Set to ‘Off’ to disable this, but note that the battery life

will be shorter if left on.

Language settings

Select the desired menu/on-screen display language. Select from English, 简体中文,

繁醴中文, Deutsch, Français, Italiano, Español, 日本語, 한한한, and русский.

Format

Format the microSD card. Warning that this will erase any data currently saved.

Reset system

Select this to reset all settings to the factory default.

Issue Cause Possible solution

The camera will not turn on,

even when fully charged.

Reset switch is engaged

in the ‘OFF’ position.

Slide Reset switch on the

base of the device to ‘ON’.

Photos and videos aren’t

saving, even though I have a

microSD card inserted.

The installed microSD

card exceeds 32GB.

Use a smaller capacity

microSD card.

The paper roll is getting

jammed when trying to print.

The roll of thermal printer

paper is not installed

correctly.

Refer to the image in the

Getting Started page to

see correct install position.

The image prints out too

light / too heavy.

Poor printing quality.

Printing settings not

refined in settings menu.

Refer to Settings > Printing

Colour Setting submenu

and adjust as required.

TROUBLESHOOTING

Net weight 350g

Charging US B Ty pe -C, 5V/2A

Battery capacity 1000mAh

Working time 1.7h for video recording

microSD card capacity Max 32GB

Max photo dimensions 4032 x 2880

Resolution 72 dpi

Video resolution 1920 x 1080

Camera size 123 x 87.4 x 59mm

Paper roll size 57mm x 25mm

Printed image size 55 x 90mm

Printing colours Black and white

SPECIFICATIONS

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

Kogan KAKIDINCMRA User guide

Kogan KAKIDINCMRA User guide

This manual is also suitable for

Kogan KAKIDINCMRA User guide

Other documents