Diivoo Smart Water Timer User guide

Type
User guide

Diivoo Smart Water Timer allows you to automate your watering schedules and customize different plans for up to two separate watering systems. Set up to 20 watering schedules for each valve and choose from four watering modes, including specific days of the week, odd/even days, or every few days for a month. With a rain delay function, you can skip watering for up to 7 days to conserve water. It also offers manual watering options directly from the valve unit or through the app.

Diivoo Smart Water Timer allows you to automate your watering schedules and customize different plans for up to two separate watering systems. Set up to 20 watering schedules for each valve and choose from four watering modes, including specific days of the week, odd/even days, or every few days for a month. With a rain delay function, you can skip watering for up to 7 days to conserve water. It also offers manual watering options directly from the valve unit or through the app.

Diivoo
Smart Water
Timer User Guide
USER MANUAL
ABOUT THIS ITEM
Smart Water Timer: Add the sprinkler timer to the Smart Life app, the bluetooth connection
allows your phone to set up two independent outlets and to receive work status notifications
when you are within the range of a valid bluetooth connection. This bluetooth hose timer can be
connected to our wifi water timer's wifi hub (B0B12B2F1Z) for remote control
2 Separate Watering Systems: hose timer with 2 Separate water valves, each valve can be
individually programmed with up to 20 different watering schedules. Allows you to customize the
appropriate watering plan for different areas without interference
Timed Irrigation Mode: Water Timer 2 zone can be programmed with a timing schedule that
allows the timer to operate on its own and water at a specified time. Even offers up to four
different watering modes for you, for example, watering on days of the week at a specific time, or
watering on a schedule of odd days, even days or every few days for a month
Cyclical Irrigation Mode: Water timer 2 outlet allows you to cycle watering during the time
period you set. just choose the start time, end time and frequency (Mon-Sun). Once the
duration(1min-24h) and Interval time(1min-24h) are set, the smart irrigation timer is ready to take
over control of the lawn and garden
Rain Delay and Manual Watering: This garden hose timer features a rain delay function that
can be set to skip watering for 1 up to 7 days, which helps to save water. As well as a manual
mode that turns on manual mode from the valve unit or through the app to easily access the
faucet whenever you need it
OVERVIEW
INSTALLATION
Meet the Diivoo Hose Faucet Timer
Range: 50ft without interference
Pressure operating range: 2.9-116 psi
Temperature operating range: 40.1-113(4.5°C-45 °C
For outdoor use with cold water only
Not for use with appliances
Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel cadmium) batteries. Used up or dead batteries must
be removed from the timer and disposed of properly
Meet the Diivoo App Home Screen
Initial Smart Life App Setup
1. Download the Smart Life App
If you don’t already have the Smart Life App on your smart device, search for “Smart Life” and
download the free Android or IOS app.
Download Smart Life APP
2. Open the Smart Life App
Create an account or login with an existing account to begin timer setup.
3. Enter configuration Mode
Long press the On/OFF button for 6s until the green light flashes quickly, and then enter the
pairing mode.
4. Add a Device
Tap “Add device” or “+” to add the smart device in app. Select “Industry&Agriculture” > “Water
valve controller(BLE)”. Waiting for connecting to be 100%. Edit the name of your water timer
completed.
initial Water Timer Setup
Insert Two AA Batteries
Batteries are not included and you will need two alkaline AA batteries to power your timer. Remove the
battery tray and install the batteries according to the drawings located in the tray. Firmly reinstall the
battery tray back into the timer.
Install the Timer
Connect the timer to an outdoor hose faucet. Your timer is now ready to be used with any product that
can be attached to a standard hose faucet.
Tip: Do not place the timer in an underground valve box or anywhere your Bluetooth signal will be
obstructed.
Turn on Your Water
The water must remain on for the timer to work properly.
What is the operating range of the Diivoo Smart Hose Faucet Timer?
The operating range of the Diivoo Smart Hose Faucet Timer is 50ft without interference.
What is the pressure operating range of the Diivoo Smart Hose Faucet Timer?
The pressure operating range of the Diivoo Smart Hose Faucet Timer is 2.9-116 psi.
Manuals.plus
What is the temperature operating range of the Diivoo Smart Hose Faucet Timer?
The temperature operating range of the Diivoo Smart Hose Faucet Timer is 40.1-113(4.5°C-45 °C).
How do I manually water with the Diivoo Smart Hose Faucet Timer?
To manually water with the Diivoo Smart Hose Faucet Timer, press the ON/OFF button to activate manual
watering. Using the app, you can set how long you want the preset manual cycle to run for.
How do I stop watering with the Diivoo Smart Hose Faucet Timer?
To stop watering with the Diivoo Smart Hose Faucet Timer, press the ON/OFF button once.
Manuals.plus
What should I do if my bluetooth water timer didn't turn on/off at preset time?
If your bluetooth water timer didn't turn on/off at preset time, it could be due to programming being incorrect,
water pressure being too low, particles of dirt or debris stuck in valve, more than one start time programmed
with overlapping schedules, manual watering being on, faulty valve, or the faucet being off.
Manuals.plus
Like And Subscribe
us for more Videos
Manuals.plus
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Diivoo Smart Water Timer User guide

Type
User guide

Diivoo Smart Water Timer allows you to automate your watering schedules and customize different plans for up to two separate watering systems. Set up to 20 watering schedules for each valve and choose from four watering modes, including specific days of the week, odd/even days, or every few days for a month. With a rain delay function, you can skip watering for up to 7 days to conserve water. It also offers manual watering options directly from the valve unit or through the app.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI