2. Yale
  3. ift 360 MKIII Hand Chain Hoist

Yale ift 360 MKIII Hand Chain Hoist, lift 360 MKIII Hand Chain Hoist Operating instructions

  • Hello! I've reviewed the datasheet for the Yale Yalelift 360 CR, Yalelift ITP CR and Yalelift ITG CR series of corrosion-resistant hoists. This document details the construction features like stainless steel chains and Delta Protekt KL 100 process, as well as intended applications of these devices. I'm ready to answer your questions about the hoist models.
  • What are the typical applications for these hoists?
    What corrosion protection process is used?
    What type of chain is used on these hoists?
500 1 3 300 - 9 £472.45 £106.12
900 1 3 335 - 13 £528.57 £108.16
1500 1 3 395 - 20 £629.59 £121.43
2500 1 3 520 - 29 £835.71 £135.71
5000 2 3 654 - 38 £1336.73 £220.41
Capacity Falls of Lifting Closed Beam Weight @ Price @ **Additional
(WLL) load chain height height width std. height 3mtr HOL HOL
kg mtr mm mm kg £ £/m
CORROSION RESISTANT HOISTS WITH STAINLESS CHAINS
Yale
lift
3600‘CR’ HAND CHAIN HOISTS WITH STAINLESS STEEL CHAINS
Yale
lift
ITP ‘CR’ INTEGRAL PUSH TROLLEY HOISTS WITH STAINLESS STEEL CHAINS
Capacity Falls of Lifting Type ‘A’ Type ‘B’ Closed *Price @ **Additional
(WLL) load height Beam width Weight Beam width Weight height 3mtr HOL HOL
kg chain mtr mm kg mm kg mm £ £/mtr
500 1 3 50 - 180 20 180 - 300 21 245 £805.10 £16.12
900 1 3 50 - 180 27 180 - 300 29 272 £898.98 £108.16
1500 1 3 58 - 180 44 180 - 300 46 323 £1123.47 £121.43
Yale
lift
ITG ‘CR’ INTEGRAL GEARED TROLLEY HOISTS WITH STAINLESS STEEL CHAINS
Capacity Falls of Lifting Type ‘A’ Type ‘B’ Closed Price @ **Additional
(WLL) load height Beam width Weight Beam width Weight height 3mtr HOL HOL
kg chain mtr mm kg mm kg mm £ £/mtr
500 1 3 50 - 180 24 180 - 300 25 245 £811.22 £157.14
900 1 3 50 - 180 32 180 - 300 33 272 £1120.41 £159.18
1500 1 3 58 - 180 49 180 - 300 50 323 £1344.90 £172.45
2500 1 3 74 - 180 82 180 - 300 84 382 £1651.02 £186.73
5000 2 3 98 - 180 130 180 - 300 134 550 £2441.84 £271.43
*Prices shown are for range A. Range B prices available on request.
**Additional heights of lift are sold as complete metres only.
17
Increased life expectancy
All models of the Yalelift 3600programme can be supplied
with corrosion resistant features and be fitted with stainless
steel load and hand chain.
Corrosion starts on the surface of components due to
reaction of environmental influences. This affects the
mechanical properties of the components,
e.g. breakingload and total ultimate elongation.
Many components are supplied in black (unmachined), bright (machined) or painted
condition. This offers certain protection but after only a short period of time corrosion can
begin. With the application of a protective coating, the development of corrosion can be
reduced and delayed, thus extending the service life of the treated components.
Units are corrosion resistant using the Delta Protekt KL 100 process, including
the bottom hooks and are all fitted with stainless steel load and hand chain.
Applications
Completely corrosion resistant units with stainless steel hand and load chains should
be used in all conditions with increased requirements towards corrosion protection.
Typical applications are in food processing (e.g. dairy, abattoir, etc.), chemical
ndustries (e.g. paper, dye industries), farming and sewage treatment.
Protection classification
See pages 18 & 19
ATEX
/