Unbranded SN808C-34 User manual

610

813

R50

1.To Locate the position where the mirror will be hung on.(Fig.1)

2.Use a pencil to mark down the position onto the wall. (Fig.1)

3.Use a driller (8mm drill) to drill holes at the mark points. (Fig.2)

4.Insert and fasten the anchors and screws into the drilled holes, leave part space for hanging. (Fig.2)

5. Align the swallowtail hook (at the back of mirror) onto the screws and hang on.(Fig 3 and Fig4)

MIRROR

USER MANUAL

SCREWS 2

Packing Lists

Tools (NOT Included)

How to Install

Instruction Manual

ANCHORS

(1) (2) (3) (4)

Cleaning

It is recommended to clean the mirror with a soft, dry, non abrasive cloth.

Never use cleaning agents or abrasive materials on any type of surface finish.

Safety Instructions

This product is only suitable for permanent installation. It is only suitable for indoor use.

Do NOT strike glass components with hard or pointed items.

Do NOT place very hot or very cold items against or in close proximity to glass surfaces.

Customer Service

For any questions or queries regarding our products, please contact our

Or call # 719-225-4938