KASTA D1-10VIBH User manual

Brand: KASTA

Model: D1-10VIBH

Type: User manual

KASTA D1-10VIBH is a smart 0-10V dimmer that allows you to control your LED lights with a smartphone app, remote control, or momentary switch. It features dimmable lighting, scheduling, timers, scenes, and group control. The device has a Bluetooth signal that can be used to pair multiple dimmers for multi-way dimming. It also has a built-in daylight sensor that can be used to automatically adjust the brightness of your lights based on the time of day. The dimmer is suitable for indoor use and has an IP65 rating, making it resistant to dust and water.

Installation Instructions

ver 1.4

Important Safety Informatioin

•This product must be installed by a licensed

electrician in accordance with all the require

ments of AS/NZS 3000 (current edition) and

other relevant Standards and Regulations.

•Electricity MUST be disconnected prior to

installation. Failure to do so may result in

serious injury and or loss of life.

•Indoor use only. Not suitable for damp or

explosive environments

•Complies to Australian Standards

AS/NZS 60669.2.1:2013 with AS/NZS

60669.1:2013

(IEC 60669-2-1 Ed. 4.1 MOD with IEC 60669-1

Ed.3.2 MOD).

•No user serviceable parts inside.

kasta.com.au | (02) 9168 5900

CONNECTION DIAGRAM

1-10V HIGHBAY

1-10V DRIVER1-10V DRIVER

SMART 1-10V DIMMER

T1 T2T1 T2

MOMENTARY PUSH BUTTON

(If required to reset device or if

hard wired switch is required)

BATTERY

POWERED SWITCH

(KASTA-RB02-W)

DAYLIGHT SENSOR

(KASTA-SL02AB-BH)

A A

N N

Smart 0-10V

Dimmer

Product Code:

D1-10VIBH

FEATURES

• Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.

• Dimmable (via KASTA app, KASTA remotes, KASTA SLO2AB-BH or Push button momentary

switch only).

• To prevent a reduction in Bluetooth signal strength, install with line of sight between devices if

possible.

• 0-10V output signal suitable for 0-10V LED driver.

• Controls the output according to the Bluetooth® signal received from the daylight sensor.

FUNCTION SETUP

(using smart remote switch or momentary switch)

ON/OFF SWITCH SHORT PRESS

Turns lights on or off.

DIM UP/DOWN ONE LONG PRESS

When lights are on, long press button to dim up or down.

Release button to stop.

FULL BRIGHTNESS 2 CLICKS

Sets lights to full brightness.

ADD DELAY TO OFF 3 CLICKS*

Lights automatically turns off after set time.

6 CLICKS PAIRING MODE 6 CLICKS*

Enter pairing mode for multi-way dimming.

RESTORE TO FACTORY

SETTINGS

9 CLICKS

Reset password to the default setting.

*If successful, light will pulse the number of times that the switch

was clicked, indicating function.

TECHNICAL SPECIFICATIONS

Supply: 220-240V~50/60Hz

Operating Frequency: 2.4Ghz

Output Current (Max.): 40mA

Operating Temp: -20ºc to 50ºc

Dimming Method: 1-10V

IP Rating: IP65

Maximum Number of Drivers: 30

Dimensions: 125x51x44mm

APP Installation

Visit www.kasta.com.au or your app

store to download the free KASTA app.

iOS: requires iOS 9.0 or later.

Android: requires Android 4.4 or later.

Devices must support Bluetooth 4.0

KASTA D1-10VIBH User manual

KASTA D1-10VIBH User manual

KASTA D1-10VIBH User manual

Related papers

Other documents