abrasive products.
Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the
local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
For a perfect taste, carry out 2 or 3 boil processes with fresh water (without coffee). Once all the water has
passed through, switch the appliance off and let it cool down during 5 minutes. Then repeat the process with
fresh water.
Never pour hot water, milk, coffee powder or tea into the water tank.
Do not fill the water tank beyond the 6 cup indication.
USE
Make coffee with freshly ground beans
Pour the desired volume of water into water reservoir, make sure the water level will not exceed te max. sign.
Turn the funnel support to the left. Make sure that the filter, filter cover and funnel are placed correctly in the
funnel support. After that turn the funnel support to the right until it is locked.
Fill the coffee bean compartment with coffee beans. Make sure not to use more than 100 gram.
Plug the power plug into the wall socket.
Select 2, 4 or 6 cups button to set the desired amount of cups, if nothing is selected the default is 6 cups.
Ensure to always fill the water tank with the same cups of water as selected.
Turn the coarseness knob to set the desired type of grind settings.
Press the coffee strength button to choose between the 2 settings.
Press the on/off button, the grinder will start, after some seconds grinding the brewing process will start.
When the brewing process is finished a buzzer will sound 3 times.
The can can remain on the hotplate, which begins to heat up as soon as the coffee maker is switched on. The
hotplate will keep the coffee hot until the coffee maker is switched off (NOTE: due to safety reasons the hot
plate will turn off automatically after a while).
Make coffee with ground coffee
Pour the desired volume of water into water reservoir, make sure the water level will not exceed te max. sign.
Turn the funnel support to the left. Make sure that the funnel and the filter are correctly placed in the funnel
support. Add the desired amount of pre-ground coffee into the filter. Place the filter cover and turn the funnel
support to the right until it is locked.
Press the ground coffee button, after that press the on/off button.
The device starts brewing immediately.
When the brewing process is finished a buzzer will sound 3 times.
The can can remain on the hotplate, which begins to heat up as soon as the coffee maker is switched on. The
hotplate will keep the coffee hot until the coffee maker is switched off (NOTE: due to safety reasons the hot
plate will turn off automatically after a while).
CLEANING AND MANTENANCE
Always unplug the device and let it cool down completely before cleaning
Clean the outside and the base of the device with a damped cloth.
Never immerse the appliance in water or other liquid.