2. Blackview
  3. BV-R3 Pro
BV-R3 Pro

Blackview BV-R3 Pro User guide

  • I have reviewed the user guide for the Smartwatch and am here to assist you with any questions you might have. This guide provides detailed instructions for charging, connecting your smartwatch to both Android and iOS devices using the Gloryfit app, setting call and SMS push notifications, and troubleshooting common issues. I can help you navigate through these steps and more.
  • What should I do after receiving the smartwatch?
    What should Android users do?
    What should iPhone users do if they unbind the smartwatch on the app?
Connect Guide
Please read carefully
Attention:
1. After the user receives the smartwatch, please charger first, and it will automatically turn on after 10-30
minutes of charging
2. If your phone is Android devices, please turn on the GPS system. This is Google’s setting for the Bluetooth
function
3. For iPhone users,if you unbind the smartwatch on app, you must ignore the device in the system
Bluetooth,and then you can search the smartwatch on GloryFit again.
If your phone is Android :
Please follow the steps below to connect the watch
The following takes Samsung S10+ as an example, other Android phones will be different
1：Please scan the QR code on the homepage
of User instruction with your mobile phone,
click on the link to
enter the
download split
page
2-1：It will automatically jump to the Google
Play page. If there is no jump, you can click on
Google Play to jump to the software market.
2-2：You can
directly search
and download
gloryfit software
on Google Play
3：Click install to download Gloryfit
4：After downloaded, click open to open the
software
5：Please agree to the user
agreement and privacy
policy, please click "Agree"
to agree to this agreement.
6-1：You can use your email to register and log
in to the APP dedicated account,
6-2:Use other third-party social software to log
in. This function only reads the username and
nickname of the social account.
7:Please input your email address
8:Enter the email address and click to get the
verification code
9:Check the verification code in your mailbox
10：Enter the verification code in the email in
the verification code input field
11：Click login to log in to your account
12：Prompt the
permission request
box, please click "I
got it"
13：Gloryfit needs
storage permission,
click "i got it"(If your
phone does not have
this step, please
ignore)
14:After allowing storage and reading
permissions, gloryfit will be able to save
personal nicknames and avatars, please click
"Allow"
15：Start to set
background running
permissions, click on
the two-way ar row in
the upper right corner,
select your phone
model, and click it
16：Please read each step of
the setting method in detail.
17：After setting, click on the
upper right corner Next
18：Swipe to set your
gender, then click the
arrow to go to the next
page
19：Swipe to set your
height, then click the
arrow to go to the next
page
20：Swipe to set your
weight, then click the
arrow to go to the next
page
21：Swipe to set your
age, then click the arrow
to go to the next page
22：Swipe to select your
daily sports mirror
goal,then click
“complete”
23：Gloryfit needs Bluetooth permission, click
"allow" to turn on Bluetooth
24：A reminder will pop
up here, indicating that
the software needs to
retrieve Bluetooth and
GPS permissions, please
click "I got it
25：Click "while using the app" to agree to this
permission.
26：Please check the Bluetooth address on the
watch side, the specific setting location is:
drop-down menu → settings → device info
27：After searching for the corresponding
product model, click to connect to
the watch.
28：After successful connection, you can see
the watch’s Bluetooth name, Mac address,
watch battery level, watch version number and
other information
29:Turn on the call or SMS push function in the
function menu below
30：Open the corresponding option switch on
the setting page of incoming call and text
message
respectively,
and return to
the previous
page after the
setting is
completed
31：Go back to the function menu and enter the
"APP reminder" setting
32：Click OK to enter the "Notification of Use
Rights" interface, find gloryfit, keep it turned
on, and return to the previous page after
setting
33：Click "Enter
Accessibility"; then
click to enter
"Installed Services"
(If your phone does
not have this step,
please ignore)
34：Find "gloryfit device message notification"
(If your phone does not have this step, please
ignore)
35：Turn on the switch and return to the "APP
reminder" interface after the setting
completed
(If your phone does not have this step, please
ignore)
36:Tur on the software
switch you need to
notify, such as:
ins,Facebook,Twitter,
WhatsApp, Skype,
LINE, etc.
37：Return to the
home page, pull
down the screen to
manually sync all
data to the watch.
38：If connected succesfully, the Bluetooth icon
of the watch will change its status:
39：When the distance between the watch and
the phone is too far, or when it has not been
connected for a long time, the APP will display
a promp "try to connect failed, please try
again"
40：At this time,the Bluetooth status of the
watch will change to a disconnected state
41：Please bring your watch close to your
phone, then return to the "home" page and
pull down the page to refresh manually, you
can restore the connection
If your phone is iOS system:
Please follow the steps below to connect the watch
1-1：Use the camera to scan the QR code
above,Open in Safari ,and then automatically
jump to the App Store
1-2：Search for gloryfit on the App Store to
download
2：Download Gloryfit
3：Start to download
4：Click "open" to open the software
5：If you open the APP for the first time, you
need to grant
permission to use
the Bluetooth
function, click "OK"
6：Please enter your email address.
7：Click "get" to get the verification code
8：Find the verification code email in your
mailbox
9：Enter the code
10：Tick to agree to the user agreement and
privacy service agreement
11：Then click "login" to log in to your account
12：Click to select gender, and then click next
13：Swipe to select
your height content,
then press next
14：Swipe to select
your weight
information, then
press Next
15：Swipe to select your
age information and next
16：Swipe to select your
sport goal, and then
press "Completed" to
enter the software
17：Prompt swipe to refresh the page, click "ok"
to enter the next step
18：Gloryfit wants to send you a notification,
click "allow"
19：Gloryfit wants to
send you a notification,
click "allow"
20：Click "select device" to find the device.
21：Searching the corresponding product
modelClick it to connect watch.
22：Successfully connection √
23：The software asks if it is bound to
Bluetooth, click "Pair"
24：Notification , click "allow".
25：Click on the APP to enter the third-party
software message push settings.
26：Turn on the switch that you want to receive
APP messages.
27：After setting, click the arrow to return to the
device page.
28：If setting successfully, you can view the
Bluetooth name, Mac address, battery and
other information of the watch on the device
page.
29：You can view the
basic data on the
homepage. The data
of the unbound new
device is empty.
30：Connecting successfully,the Bluetooth icon
of the watch will change its status:
31：When the distance between the watch and
the mobile phone is too far, the APP will
prompt "Failed to connect, please try again"
32：At this time, the Bluetooth status of the
watch will change to a disconnected state:
33：Please bring your watch close to your
phone, then return to the "home" page and
pull down
the page to
refresh
manually,
you can
restore the
connection
App background description
For your better experience, please ensure that Gloryfit APP can always keep running in the background. For this reason, you
need to set the background running permission according to your mobile phone model; Different brands of mobile phones have
different setting methods and need to be explained separately.
Take some Android phones as an example
Samsung
Quick access: Gloryfit → my → permission setting → background
running permission setting → go to setting → battery → optimize
battery usage → gloryfit → close
Huawei
Start, allowing background activity.
Quick access: gloryfit → my → permission setting → background
running permission setting → go to setting → start management→
Gloryfit
Turn off automatic management, and turn on Allow auto-start, allow
associated startup, and allow background activities.
Xiaomi
Quick access: Gloryfit → my → permission setting → background
running permission setting → go to setting
If you encounter other problems, please enter the "me" interface in
gloryfit, and then click permission settings to see more permission setting
methods
If you have any other questions, please contact us via email:
iowodo.vip@gmail.com
Solutions to common problems
APP can't find the device
1. Make sure the watch is turned on, if it is not turned on, please press and hold the button for 5 seconds to turn it on.
2. If the phone is Andriod, please check whether the GPS location service of the phone is turned on, if it is turned off, please turn on the location
service in the system settings interface, and then search again.
3.Some Android phones need to unbind the device in the system Bluetooth device after binding. The setting path: System Settings → Bluetooth
→ Click the gear icon on the right → Forgot device
4.If phone is iOS, please try to ignore the device in the system Bluetooth device, setting path: System Settings → Bluetooth → click the
exclamation mark icon on the right → Ignore this device
5.After using for a period of time, when data cannot be synchronized, reset the device to factory settings, then re-bind and synchronize
If it still does not work, please try the following:
1) Restart the phone's Bluetooth
2) Reset the smartwatch
3) Restart the phone system
4) Restart GPS positioning
If you have any other questions, please contact us via email:
support@blackview.fans
The device connects and disconnects repeatedly
1，Determine if there is an obstruction between the device and the phone, the human body or metal jewelry, they maybe interfere with Bluetooth
and cause instability
2，If phone is iOS, please check whether the system bluetooth is bound to too many bluetooth devices, please manually ignore the devices that
are not in use at the moment
3，If it's Android, please check whether the APP has been added to the
whitelist; you need to open the background permission, (some phones
need to be set to "Allow self-starting", "Allow management to start",
"Allow background activities", "Background pull-down lock", " "Unlimited
use time", "Open APP to start automatically", "Allow system to wake up",
"Close APP quick freezing")
4. If it still does not work, please try to restart the Bluetooth of the mobile
phone, or restore the factory settings of the watch
If you encounter other problems, please enter the "me" interface in
Gloryfit, and then click Common problem to see more help
instructions
/