Belkin MSC012 Secure Holder User guide

  • Hello! I've reviewed the user guide for the Belkin MSC012 Secure Holder with Clip. This document provides instructions on how to insert and remove an Apple AirTag from the holder, which is designed to securely hold the tag and protect it from scratches. I'm here to answer any questions you may have about it.
  • How do I place an AirTag inside the Belkin MSC012 Secure Holder?
    How do I remove the AirTag from the secure holder?
Home » belkin » belkin MSC012 Secure Holder with Clip User Guide
Contents
1 belkin MSC012 Secure Holder with
Clip
2 MSC012 Quick Setup Guide (QSG)
2.1 Plating the AirTag
2.2 Removing the AirTag
3 Documents / Resources
4 Related Posts
belkin MSC012 Secure Holder with Clip
belkin MSC012 Secure Holder with Clip User Guide
Manuals+ User Manuals Simplified.
MSC012 Quick Setup Guide (QSG)
The Belkin Secure Holder with Clip for AirTag, MSC012 is designed to securely hold your Apple®AirTag™ while
the raised edges help protect it against scratches. This article will guide you on how to place the AirTag inside the
Belkin MSC012 or remove it from the secure holder.
Placing the AirTag.
Removing the AirTag
Plating the AirTag
Step 1:
Place a flat object such as a coin or Key into the indentation between the clip ring and top ring and then gently
rotate clock wise to remove the top ring. Put your AirTag inside.
Step 2:
Using your fingers, gently press he two pieces together until you hear a snap. This will indicate that the AirTag is
located into he Belkin MSC0t2.
Removing the AirTag
Step 1:
Insert a flat object such as a coin or key into the indentation located: at the bottom of the Belkin MSC012.
Step 2
Twist the coin or key while holding the Belkin MSC012 firmly with your other hand. This will unlock the locking ring.
Step 3
Pull out the AirTag from the Belkin MSC012.
Documents / Resources
belkin MSC012 Secure Holder with Clip [pdf] User Guide
MSC012 Secure Holder with Clip, MSC012, Secure Holder with Clip, Holder with Clip, Clip
Manuals+,
/