User Manual
Wireless Earphone
Model:H3
Hereby, TECNO MOBILE LIMITED.
declares that this Wireless Earphone is in compliance
with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
WELCOME
Thank you for choosing our products. The h3 wirelessearphone
has a fashionable design, powerful functions, and
highcompatibility, to provide you with hands-free convenience
whenmaking calls.
PACKAGE CONTENT
2*H3 Bluetooth earphones
1* H3 charging box
1* Charging cable
1* User Manual
2* Large ear tip
2* Medium ear tip (fitted on the earphones)
2* Small ear tip
PRODUCT OVERVIEW
1. Charging box
2. Earphones
3. Charging box indicator light
4. Charging port
5. Earphone indicator light
6. Earphone touch area
7. Ear tip
8. Earphone charging contacts
Controls and functions
Power on
1. Open the charging box, and the earphones are automatically
turned on.
Power off
1. Put the earphones back into the charging box and close the box,
and the earphones are turned off automatically.
Bluetooth pairing (with a mobile phone)
1. In case of pairing for the first time, the left and right earphones
will automatically pair with each other after being turned on and
enter the waiting-for-pairing status.
2. If the earphones have been paired with a Bluetooth device, the
left and right earphones will automatically pair with each other
after being turned on and then pair with that device. When there
is no pairing activity for about 10 seconds, the earphones will
enter the wait-for-pairing status; if not paired in about 5 minutes,
the earphones will be turned off automatically.
Noise reduction mode
1. Press and hold the touch area for 2 seconds to enable the
transparency mode, and the ice blue and orange breathing LEDs
are on.
2. Press and hold the touch area for 2 seconds to enable noise
reduction, and the ice blue and orange breathing LEDs are on.
3. Press and hold the touch area for 2 seconds to disable noise
reduction.
Pairing with devices
1. After the earphones enter the waiting-for-pairing status, enable
Bluetooth on the device and find TECNO-Hipods-H3 on the list of
devices available for pairing, and tap to pair.
Pop-ups on mobile phones
1. If the earphones have been paired with a mobile phone, to pair
again, open the charging box and a pop-up window will
automatically appear on the mobile phone.
Play/pause music
1. When playing music, double tap the touch area to pause, and
double tap again to play.
Answer phone calls
1. When there is an incoming call, double tap the touch area to
answer the call.
Disconnection with the mobile phone when placed beyond a
certain distance
1. When the earphones are placed beyond a certain distance from
the mobile phone and thus become disconnected, the earphones
will enter the waiting-for-pairing status. If there is no device that
pairs with the earphones for 5 minutes, the earphones will be
turned off automatically.
Earphones charging
1. Put the earphones in the charging box, close the charging box,
and charging starts automatically.
Charging box charging
1. When being charged, the charging box will flash in white.
When the charging box is fully charged, the white light will keep
on. After the charging cable is unplugged, the white light will go
out.
Basic Features of Product
Product Name H3
Earphone battery capacity 40mAh*2
Charging box battery
capacity 350mAh
Charging Voltage/Current 5V/40mA
Music Playing Time Approx 4H
Calling Time Approx 3.5H
Standby Time Approx 90H
Transmission range ≥ 10m
Bluetooth TECNO-Hipods-H3
Operating Temperature 0℃ ~ 45℃
Storage Temperature -20℃ ~ 60℃
Earphone Indicator Light
Earphone Status Indicator light status
Power On Ice blue light on for 1
second
Power Off Orange light on for 2
seconds
Earphone low battery
The earphones flash in
orange once every second
and the flashing continues
for 5 seconds, with an
interval of 10 seconds. The
low battery reminder is
activated every 3 minutes.
Charging box low battery
opened or closed, the
quickly in white for 4