voda plumbingware VECL21BG User manual

Brand
voda plumbingware
Model
VECL21BG
Type
User manual

The Voda Plumbingware VECL21BG Eclipse Wall Mounted Basin Mixer is a high-quality product suitable for all water pressures with a minimum of 35kPa and a maximum of 500kPa. It can withstand temperatures up to 65 degrees Celsius and is designed for domestic use only. The mixer comes with a flat flow restrictor for unequal low-pressure systems and a low-pressure aerator for equal low-pressure systems. It is recommended to install inline filters to prevent damage to the cartridge or flow regulator.

The Voda Plumbingware VECL21BG Eclipse Wall Mounted Basin Mixer is a high-quality product suitable for all water pressures with a minimum of 35kPa and a maximum of 500kPa. It can withstand temperatures up to 65 degrees Celsius and is designed for domestic use only. The mixer comes with a flat flow restrictor for unequal low-pressure systems and a low-pressure aerator for equal low-pressure systems. It is recommended to install inline filters to prevent damage to the cartridge or flow regulator.

9421036 010558
Eclipse Wall Mounted Basin Mixer
Brushed Gunmetal (PVD)
VECL21BG
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 35kPa
Maximum operating Pressure = 500kPa*
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Install as supplied.
Unequal Low systems Insert the flat flow restrictor (with the black o-ring facing out) into the cold “C” inlet, and
change Aerator to Low Pressure Aerator.
Equal Low systems Install body as supplied. Change Aerator to Low Pressure Aerator.
INSTALLATION
*FOR PRESSURES EXCEEDING 500kPa INSTALL A PRESSURE REDUCING VALVE. THOROUGHLY FLUSH ALL
PIPES TO ELIMINATE ANY REMAINING DIRT AND RESIDUE, AND INSTALL INLINE FILTERS. FAILURE TO DO SO
MAY VOID THE WARRANTY.
Before commencing installation turn o the water supply.
• Flush all water lines to remove any foreign materials (so it does not interfere with the flow regulated aerator or
damage the cartridge, and install inline filters if not already fitted.
• Make sure that the body recess including wall lining thickness does not exceed 41.5mm to the body centre.
• Note the protrusions at the back of the body to ensure a perpendicular mounting, once screwed into place.
• Install, making sure the spout is on the le. The spout fitment is the final anchor point for the body set.
• Turn on mains supply.
• Check for leaks.
Plumbers Note: Do not pressure test this mixer under static pressure.
WARRANTY
PLEASE CALL US BEFORE REMOVING TAPWARE OR UNDERTAKING ANY REPAIR WORK.
Please refer to our website for warranty information: www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
SHOULD NOT BE CLEANED WITH ACIDIC, CAUSTIC/ALKALINE, ABRASIVE OR CITRIC CLEANERS.
A so, damp cloth is recommended for cleaning (Not a Micro fibre cloth). Mild soap solutions can also be used on
occasion.
ATTACH PROOF OF PURCHASE HERE
Voda Plumbingware Limited | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
  • Page 1 1
  • Page 2 2

voda plumbingware VECL21BG User manual

Brand
voda plumbingware
Model
VECL21BG
Type
User manual

The Voda Plumbingware VECL21BG Eclipse Wall Mounted Basin Mixer is a high-quality product suitable for all water pressures with a minimum of 35kPa and a maximum of 500kPa. It can withstand temperatures up to 65 degrees Celsius and is designed for domestic use only. The mixer comes with a flat flow restrictor for unequal low-pressure systems and a low-pressure aerator for equal low-pressure systems. It is recommended to install inline filters to prevent damage to the cartridge or flow regulator.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents