SOLARIVER SRK20360 User guide

Place solar panel in full sun

Works when cloudy, but not when shade

is created by solid objects such as buildings,

branches, leaves or shadows covering the

panel.

*Our pumps are equipped with dry-run protection to protect the pump from burning out if it is not completely

submerged. See instruction manual for pond base placement recommendations to avoid blockage.

Assemble extension tubes and

select nozzle

See instruction manual for further details

for your project and application.

First, submerge pump in water

Next, connect the pump

to the solar panel by

matching up the flat

sides of the two

connectors

Quick Start Guide

Follow these steps to get your Solariver solar water pump moving.

The pump will not* run if it is plugged

in and then put underwater, it needs to

be underwater first.

For questions or troubleshooting, please visit our website at solariverusa.com or reach out to us by phone or email.

[email protected] (831) 322-4488

Pump will not work if

not connected correctly.

Download PDF