2. CMP
  3. 25513-4XX
25513-4XX

CMP 25513-4XX Operating instructions

  • Hello! I've reviewed the Certificate of Compliance for the CMP NOVA pool suctions, specifically models 25513-4XX, 25516-4XX, and 25516-5XX. This document confirms compliance with VGBA and CPSC safety standards. I'm ready to answer any questions you have about these certified pool suctions.
  • What is the purpose of this document?
    What standards are these products tested to?
    Who are these products manufactured by?
0621sb CUSTOM MOLDED PRODUCTS | 36 HERRING ROAD, NEWNAN, GA 30265 | 770-632-7112 | WWW.C-M-P.COM
CERTIFICATE OF COMPLIANCE
DATE OF MANUFACTURE
ALL LISTED ABOVE ARE IAPMO LISTED UNLESS NOTED OTHERWISE
25513-4XX
25516-4XX
25516-5XX
The following products have been tested to ANSI/APSP - 16 2017 per Section 1404 of the Virginia
Graeme Baker Pool and Safety Act (VGBA-2017) and safety regulations set forth by the CPSC.
These products are manufactured by Custom Molded Products, Inc. in Shanghai, China and
certified by Underwriters Laboratories, Inc., at 2929 E. Imperial Highway, Suite 100, Brea, CA 92821
(ph: 714-223-3600) or IAPMO R&T Lab at 5001 E. Philadelphia Street, Ontario, CA 91761
(ph: 909-472-4100). A copy of the test results may be found at www.ul.com or www.pld.iapmo.org.
For CMP compliance inquiries please contact:
Kyle Trepp, pr[email protected], 770-755-5891, 36 Herring Road Newnan, GA 30265
Date of compliance testing:
December 1, 2020 to August 3, 2021
CMP - VGBA 2017 - NOVA POOL SUCTIONS
TM
VGBA TESTED & CERTIFIED
ANSI-APSP 16 | CPSC TM
8.6 inch
217 mm
/