Senwa Mexico De C V LS140LBT Operating instructions

Brand: Senwa Mexico De C V

Model: LS140LBT

Type: Operating instructions

Senwa Mexico De C V LS140LBT is a Bluetooth-enabled landline phone with a wireless handle that allows you to make and receive calls while moving around your home or office. It features a long battery life, low power consumption, and a clear sound quality for both handle and speakerphone calls. The handle can be easily charged by placing it on the charging connection point of the landline. The phone also displays the status of Bluetooth pairing on its status bar and provides voice prompts for various actions such as power on/off and successful/unsuccessful Bluetooth connection.

LS140L Bluetooth handle instructions

1. Start the controller by long pressing the power button, and the prompt sound will prompt you to start the

machine. There will also be a prompt sound when the connection is disconnected, and there will also be a

prompt sound when the connection is disconnected.

2. Display status of Bluetooth pairing of LS140 phone when the handle is not connected:

After the pairing is successful, the status bar of the landline will have a physical icon showing that the

Bluetooth connection has been successful. If the connection has not been successful, the gray will be

displayed

3. Bluetooth pairing of LS140 phone when the handle is switched on:

The number of battery cells will change when the phone is in low power state, and it will prompt low

volume.Please place the handle at the charging connection point of the landline to ensure sufficient power for

use during the call. The low power state may affect the clarity of the Bluetooth call. Please pay attention.

4.Handle call can be switched to handle call or landline speaker call under the call option.

FCC Warning

15.19 Labeling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

15.21 Information to user.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with RF specifications when the device used at 5mm from body.

Senwa Mexico De C V LS140LBT Operating instructions

Senwa Mexico De C V LS140LBT Operating instructions

Senwa Mexico De C V LS140LBT Operating instructions

Other documents