mo-vis D-P009-50-70-M8-00 Multi Joystick

Mo-vis mo-vis D-P009-50-70-M8-00 Multi Joystick, D-P009-50-70-M8-00 Multi Joystick Operating instructions

  • Hello! I have reviewed the Configurator FAQ document from mo-vis. This document provides instructions for troubleshooting issues with the configurator software, specifically focusing on how to uninstall USB serial port drivers and USB serial converter drivers. I'm ready to help with questions about resolving connection issues of your mo-vis device.
  • What should I do if the configurator does not recognize my mo-vis device?
    Where can I find the USB serial port to uninstall it?
    What should I do after uninstalling the drivers if connection is still unavailable?
moving forward together
Configurator FAQ
Edition 1, March 2022
Cleaning the COM ports
Sometimes the configurator will not show or recognize your mo-vis device. In
that case, follow the steps below. If this still doesn't work, please contact mo-
vis.
Uninstalling the USB serial port driver
Go to Device Manager and Universal Serial Bus Controllers.
Right click the USB Serial Port (COM) and select uninstall.
Make sure the checkbox is checked.
2
2 Configurator FAQ
Uninstalling the USB serial controller driver
Unfold Universal Serial Bus Controllers in the Device Manager.
Select the USB Serial Convertor that is not greyed out.
Right click on Properties.
Select the Driver tab and uninstall the device.
3
Configurator FAQ 3
Uninstall the USB Serial converter. Make sure you check the checkbox.
4
4 Configurator FAQ
5
Configurator FAQ 5
moving forward together
mo-vis bv . Biebuyckstraat 15D . 9850 Deinze - Belgium
www.mo-vis.com . contact@mo-vis.com . +32 9 335 28 60
Go to our website for more information on our products or share
your experience with us via email.
/