StarTech com PEX4SFF8639U3 User guide

Brand: StarTech com

Model: PEX4SFF8639U3

Type: User guide

The StarTech com PEX4SFF8639U3 is a U.3 to PCIe x4 Host Adapter designed for connecting 2.5" U.3 NVMe SSDs to a computer system. It allows for fast data transfer speeds via the PCIe 4.0 x4 interface and supports NVMe drives for enhanced performance. The adapter features LED lights to indicate drive power and activity status. Installation involves connecting the SSD to the adapter, securing it with mounting screws, and then installing the adapter into an available PCIe x4 slot on the motherboard. The adapter is compatible with Windows, Linux, and macOS operating systems.

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: February 22, 2023 1:29 PM

Product ID

PEX4SFF8639U3

Component Function

1LED Jumper Pins

• Connect LED Lights to the U.3 to PCIe x4

Adapter to show Drive power/activity

• LED Lights not included

2U.3 (SFF-TA-1001) Drive

Connector

• Connect a U.3 (SFF-TA-1001) Storage Device to

the U.3 to PCIe x4 Adapter

3Drive Mounting Holes • Secure the U.3 Storage Device to the U.3 to PCIe

x4 Adapter

4PCIe x4 Connector • Connect the U.3 to PCIe x4 Adapter to the PCIe

Slot in a Computer

U.3 (SFF-TA-1001) to PCIe 4.0 x4 Host Adapter for 2.5” U.3 NVMe SSDs

Requirements

For the latest drivers/software, technical specications, and declarations of

conformance, please visit: www.StarTech.com/PEX4SFF8639U3

Package Contents

• U.3 to PCIe x4 Adapter x 1

• Drive Mounting Screws x 4

• Quick-Start Guide x 1

Installation

Connect an SSD to the Drive Adapter

Warning! Drives should be handled carefully, especially when being transported.

If not handled with care, lost or corrupted data may be experienced. Ensure that the

Installer is properly grounded before opening the Computer Case or touching the U.3

to PCIe x4 Adapter. The Installer should wear an Anti-Static Strap when installing

any computer component. If an Anti-Static Strap is not available, discharge any

built-up static electricity by touching a large Grounded Metal Surface for several

seconds. Only handle the U.3 to PCIe x4 Adapter by its edges and do not touch the

gold connectors.

1. Carefully slide the SSD into the U.3 to PCIe x4 Adapter and connect it to the U.3

(SFF-TA-1001) Connector on the card.

2. Turn over the U.3 to PCIe x4 Adapter.

3. Use a Phillips Screwdriver and insert the four Drive Mounting Screws through

the Drive Mounting Holes on the U.3 to PCIe x4 Adapter and into the SSD.

4. Tighten the Screws to secure the drive to the U.3 to PCIe x4 Adapter.

Installing the Drive Adapter

1. Turn o the Computer and any connected Devices or Peripherals (such as

printers and external storage).

2. Unplug the Power Cable from the back of the Computer.

3. Disconnect any Peripheral Devices connected to the Computer.

4. Open the Computer Case, referring to the documentation that came with the

computer system for guidance.

1 2 3

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

5. Locate an available PCIe x4 Slot and remove the corresponding Metal Cover Plate

from the back of the Computer Case. Refer to the documentation that came with

the Computer System for detailed instructions on how to do this.

Note: The U.3 to PCIe Adapter is compatible with x4, x8, or x16 PCIe slots.

6. Gently insert the U.3 to PCIe x4 Adapter into the available PCIe Slot and use a

Computer Case Screw (not included) to secure the bracket to the back of the case.

7. Replace the cover on the Computer Case.

8. Reconnect the Power Cable to the back of the Computer and reconnect all

Peripheral Devices that were disconnected in Step 3.

9. Turn on the Computer and the connected Peripheral Devices.

Note: In the event that the drive is new or does not already contain data, it may be

necessary to initialize the drive. For instructions on how to complete this process, please

refer to the documentation of the operating system installed on the computer.

StarTech com PEX4SFF8639U3 User guide

StarTech com PEX4SFF8639U3 User guide

StarTech com PEX4SFF8639U3 User guide

Related papers

Other documents