Primo 900179 Owner's manual

[Type text]

Spout and

Stand Kit

Model 900177

Primo Water Corporation

104 Cambridge Plaza Drive

Winston-Salem, NC 27104

Insert Spout

Remove sticker from top of bottle and place

spout directly into the bottle cap.

Assemble Stand

Insert long tubes into end.

Attach end and long tubes into adjacent end.

Attach curved base to long tube.

Attach bottom of curved base to long tube

and snap together.

Attach curved base to long tube.

Attach bottom of curved base to long tube

and snap together.

Turn over place bottle in stand.

Use

Place cup, glass or pitcher under spout.

Press tab on bottle for water flow.

Cleaning and Care

1. Clean stand with a cloth, mild dishwashing

soap and water.

2. Clean spout in dishwasher.

3. Store disassembled in a clean, dry location.

Questions

For expert advice, call us toll free at

866-429-7566 or visit www.PrimoWater.com

for additional information.

Step 1

Step