MT4025

media-tech MT4025 User manual

  • Hello! I am an AI chatbot trained to assist you with the media-tech MT4025 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the PC camera's image sensor resolution?
    Is software included with the device?
    What is the frame rate for video capture?
    Does the camera have a built-in microphone?
    What is the maximum still capture resolution?
HI-RES
WEBCAM 2M
PC Camera for Teleconferencing
& Video Surveillance
MT4025
Users Guide
2
EN
Package Contents
PC camera
CD-disc
User Manual
PC Camera Introduction
Set up PC camera
You may mount the PC camera to your laptop or stand
on the desk. Plug the PC camera into the USB port of PC
or laptop properly. Windows “New Hardware Wizard”
will pop-up and install device automatically.
LED
Fixed Focus
Clamp
Microphone
Introduction
Welcome to the world of digital imaging. The following
information will help you to use your camera to its full
capabilities.
For viewing pictures or video, camera must be con-
nected to your personal computer.
This camera supports Microsoft Video Class and Plug &
Play directly without driver.
System Requirements
Pentium® P4 1.2GHz CPU
Free USB2.0 port
256MB RAM
500MB free hard disk space
Internet connection
CD-ROM drive
Windows compatible sound card and speakers
Windows XP SP2 / Windows Vista
Note 1: If your system is Windows XP Service Pack I,
please go to www.microsoft.com. It’s free to update
your system to Windows XP Service Pack II.
Note 2: Before using ArcSoft WCC3 software, please
make sure you have Media Player v.9 or above.
3
EN
Snapshot by ArcSoft WebCam Companion 3.0
1. Click on the “WebCompanion 3.0”
icon on the desktop.
2. Click “Capture”
Software Installation
Turn on the computer and insert CD installation disc
into your CD-ROM drive.
ArcSoft WebCam Companion 3.0
Select and click ArcSoft WebCam Companion 3”
AcrSoft Magic-i
Select and click ArcSoft Magic-i”
4
EN
3. Click “Capture” for capture image and the picture is
saved.
Speci cations are subject to change without prior notice.
Image Sensor ......................
Lens Speci cation .............
White Balance .....................
Exposure ...............................
Frame Rate ...........................
Focus Range ........................
Depth of Field .....................
PC Interface .........................
Video Format .......................
Audio .....................................
Video Capture Res. ............
System Requirements ......
Snapshot ...............................
Still Capture Res. ................
Power .....................................
Bundled Software ..............
1600x1200 pixels, CMOS
F2.0, f=3.35mm
Auto
Auto
1600x1200 pixels @ 1~5fps
1280x960 pixels @ 5~9fps
800x600 pixels @ 15~20fps
640x480 pixels @ 25~30fps
Fixed Focus
40cm to 100cm
USB2.0
AVI
Built-in microphone
640x480/352x288
Support Microsoft Video Class
Windows XP SP2 / Windows Vista
Without driver
Software
Up to 8M pixels (by WCC3
interpolation)
From USB port
ArcSoft WebCam Companion 3.0
AcrSoft Magic-i
4. Click “Record Video” for recording.
Camera Speci cation
/