Conceptronic +SP100TCL Datasheet

Category
Networking cards
Type
Datasheet
Specification sheet
Conceptronic SnapPort network card for notebooks
CSP100TCL
Connect a notebook to a 10/100Mbps network
This PC Card automatically recognizes the speed of the network and can
switch back to 10 Mbps when used for a 10 Base-T network. The SP100TCL is
suitable for all notebooks that support 32 bits card bus. The PC-Card only uses
3,3 V in comparison to a regular PC Card which uses 5 V.
Specifications
General specifications:
Type II PCMCIA PC-Card (32 bit)
Compliant with IEEE 802.3 & IEEE
802.3U standard.
10Base-T/100Base-TX LAN auto
select.
LED indicators: 10/100/ACT
Built in 32 kB high speed
SRAM for data buffering
Low power consumption (3,3V)
Supports wake up on LAN
NE-2000 compatible.
"Full Duplex" support.
Drivers:
- Novell Netware
- Netware Lite
- Microsoft LAN manager
- Microsoft Windows for
Workgroups, Windows
95/98/ME/2000/XP, Linux and
Windows NT 4.0
NetBIOS
Banyan Vines 5.5
Lantastic
IBM OS/2 Warp 3.0
Packet driver application
Included accessories:
Multi language manual
Minimum system requirements:
Celeron/Pentium II 300Mhz
Available PC-Card slot type II or
III
Warranty:
5 year
  • Page 1 1

Conceptronic +SP100TCL Datasheet

Category
Networking cards
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI