Electrolux EHD60150P User manual

Page is loading ...

We were thinking of you

when we made this product

electrolux 3

Welcome to the world of Electrolux

Thank you for choosing a first class

product from Electrolux, which hopefully

will provide you with lots of pleasure in

the future. The Electrolux ambition is to

offer a wide variety of quality products

that make your life more comfortable.

You will find some examples on the cov-

er in this manual. Please take a few min-

utes to study this manual so that you

can take advantage of the benefits of

your new machine. We promise that it

will provide a superior User Experience

delivering Ease-of-Mind. Good luck!

4 electrolux

Contents

Safety instructions 5

Description of the Appliance 7

Operating the appliance 11

Tips on Cooking and Frying 21

Cleaning and Care 25

What to do if … 27

Disposal 29

Installation Instructions 30

Guarantee/Customer Service 31

Service 32

Assembly 99

Rating Plate 102

T

he following symbols are used in this user information:

1

Warning! This must be read! Important advice for the safety of persons and

information on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

safety instructions electrolux 5

Safety instructions

Please comply with these instructions. If

you do not, any damage resulting is not

covered by the warranty.

Correct use

• This appliance is not intended for

use by children or other persons

whose physical, sensory or mental

capabilities or lack of experience and

knowledge prevents them from us-

ing the appliance safely without su-

pervision or instruction by a

responsible person to ensure that

they can use the appliance safely.

• Do not leave the appliance unattend-

ed during operation.

• This appliance should be used only

for normal domestic cooking and fry-

ing of food.

• The appliance must not be used as a

work surface or as a storage surface.

• Additions or modifications to the ap-

pliance are not permitted.

• Do not place or store flammable liq-

uids, highly inflammable materials or

fusible objects (e.g. plastic film, plas-

tic, aluminium) on or near the appli-

ance.

Children’s safety

• Small children must be kept away

from the appliance.

• Only let bigger children work on the

appliance under supervision.

• To avoid small children and pets un-

intentionally switching the appliance

on, we recommend activation of the

child safety device.

General safety

• The appliance may only be installed

and connected by trained, registered

service engineers.

• Built-in appliances may only be used

after they have built in to suitable

built-in units and work surfaces that

meet standards.

• In the event of faults with the appli-

ance or damage to the glass ceramic

(cracks, scratches or splits), the ap-

pliance must be switched off and

disconnected from the electrical

supply, to prevent the possibility of

an electric shock.

• Repairs to the appliance must only

be carried out by trained registered

service engineers.

Safety during use

• Remove stickers and film from the

glass ceramic.

• There is the risk of burns from the

appliance if used carelessly.

• Cables from electrical appliances

must not touch the hot surface of the

appliance or hot cookware.

• Overheated fats and oils can ignite

very quickly. Warning! Fire hazard!

• Switch the cooking zones off after

each use.

• Users with implanted pacemakers

should keep their upper body at least

30 cm from induction cooking zones

that are switched on.

• Risk of burns! Do not place objects

made of metal, such as knives, forks,

spoons and saucepan lids on the

cooking surface, as they can get hot.

6 electrolux safety instructions

Safety when cleaning

• For cleaning, the appliance must be

switched off and cooled down.

• For safety reasons, the cleaning of

the appliance with steam jet or high-

pressure cleaning equipment is not

permitted.

How to avoid damage to the appli-

ance

• The glass ceramic can be damaged

by objects falling onto it.

• The edge of the glass ceramic can

be damaged by being knocked by

the cookware.

• Cookware made of cast iron, cast

aluminium or with damaged bottoms

can scratch the glass ceramic if

pushed across the surface.

• Objects that melt and things that boil

over can burn onto the glass ceramic

and should be removed straighta-

way.

• Do not use the cooking zones with

empty cookware or without cook-

ware.

• To avoid damaging cookware and

glass ceramics, do not allow sauce-

pans or frying pans to boil dry.

• The ventilation gap of 5mm between

the worktop and front of the unit un-

derneath it must not be covered.

description of the appliance electrolux 7

Description of the Appliance

Cooking surface layout

Control panel layout

Induction cooking zone 2300 W

with power function 3700 W

Induction cooking zone 1850 W

with power function 2500 W

Induction cooking zone 1850 W

with power function 2500 W

Control panel Induction cooking zone 1400 W

with power function 1800 W

On/Off

with indicator

Timer display

Cooking zone indicators

Timer function

Child lock with

display

Timer

STOP+GO

with indicator

Heat setting selection

Power function Heat setting indicator

Residual heat indicator

Pan recognition and automatic

switch-off indicator

8 electrolux description of the appliance

Touch Control sensor fields

The appliance is operated using Touch

Control sensor fields. Functions are

controlled by touching sensor fields and

confirmed by displays and acoustic sig-

nals.

Touch the sensor fields from above,

without covering other sensor fields.

Sensor field Function

On / Off To switch the appliance on and off

Lock Locking/unlocking the control panel

Stop+Go To switch the Keep Warm setting on/off

Cooking zone Off To switch off the cooking zone

1-9 /

Heat settings To set heat settings

Power Switching the power function on and off

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

description of the appliance electrolux 9

Displays

Residual heat indicator

Warning: Risk of burns from residu-

al heat. After being switched off, the

cooking zones take some time to

cool down. Look at the residual heat

indicator .

Display Description

Residual heat Cooking zone is still hot

+

number

Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or

no cookware has been placed on the

cooking zone

Automatic switch off Switch off is active.

10 electrolux description of the appliance

Control bar

The heat setting and the power function

are set via the control bar. The heat set-

ting indicator consists of a chain of light

elements.

If the control bar is touched for

longer than 6 seconds, a signal

sounds and the appliance switches

itself off.

The induction cooking zones create

the heat required for cooking directly in

the base of the cookware. The glass ce-

ramic is merely heated by the residual

heat of the cookware.

The cooling fan switches itself on and

off depending upon the temperature of

the electronics.

Power function

indicator

Operational readiness

indicator for cooking zone

Power function

Heat setting indicator

Heat setting selection

Cooking zone Off

operating the appliance electrolux 11

Operating the appliance

Use the induction cooking zones

with suitable cookware.

Switching the appliance on and off

After switching on, within approx.

10 seconds a heat setting or a func-

tion must be set, otherwise the ap-

pliance automatically switches

itself off.

Setting the heat setting

The control bar is touched where the

desired heat setting is positioned. The

heat setting is shown in the display. Cor-

rect to the left or the right, if necessary.

Do not release before the desired heat

setting is reached.

Control panel Display

To switch on Touch for 1 second lights up. The opera-

tional readiness indi-

cators of the

individual cooking

zones also light up.

To switch off Touch for 1 second goes out. The opera-

tional readiness indi-

cators of the

individual cooking

zones also go out.

12 electrolux operating the appliance

Locking/unlocking the control panel

The control panel, with the exception of

the “On/Off” sensor field, can be locked

at any time in order to prevent the set-

tings being changed e.g. by wiping over

the panel with a cloth.

When you switch the appliance off,

the locking function is automatically

switched off.

Switching the STOP+GO function on and off

The STOP+GO function simultaneously

switches all cooking zones that are

switched on to the keep warm setting

and then back to the heat setting that

was previously set.

Timer functions are not stopped by

STOP+GO.

STOP+GO locks the whole control

panel except the sensor field .

Control panel Display

To switch on Touch for 4 seconds lights up

To switch off Touch for 4 seconds goes out

Control panel Display

To switch on Touch

To switch off Touch heat setting that was previously set

(not automatic warm up function)

operating the appliance electrolux 13

Using the automatic warm-up function

All cooking zones are equipped with an

automatic warm-up function. When set-

ting a heat setting using the automatic

warm-up function, the cooking zone

switches to full power for a certain

amount of time and then automatically

switches back to the heat setting set.

The length of time that the automatic

warm up function operates depends on

the heat setting selected.

Step Control panel Display

1. Select warm-up setting display flashes

2. Select the desired heat setting between

1 and 8

The desired heat setting is

displayed.

display lights

up.

As long as the

display is

lit, the appliance is working

at full power.

After the automatic warm-up

is completed, the display

goes out.

Heat setting Length of the automatic warm-up

[min:sec]

0:10

3:10

5:50

10:10

2:00

2:30

2:50

---

14 electrolux operating the appliance

Using the child safety device

The child safety device prevents unin-

tentional use of the appliance.

Switching on the child safety device

Overriding the child safety device

The child safety device can be switched

off in this way for a single cooking ses-

sion; it remains activated afterwards.

After overriding the child safety de-

vice, a heat setting or a function

must be set within

approx. 10 seconds, otherwise the

appliance automatically switches it-

self off.

Switching off the child safety device

Step Control panel Pilot light

1. Switch on appliance. (Do not set a

heat setting.)

lights up. The operational

readiness indicators of the

individual cooking zones

light up.

2. To uch for 4 seconds over lights up

The child safety device is switched on

Step Control panel Pilot light

1. Switch appliance on over lights up

2. To uch for 4 seconds over goes out.

Until the appliance is next switched off, it can used as normal.

Step Control panel Pilot light

1. Switch on appliance. (Do not set a

heat setting.)

above lights up

2. To uch for 4 seconds above goes out

3. Switch appliance off.

The child safety device is switched off.

operating the appliance electrolux 15

Switching the power function on and off

The power function makes more

power available to the induction cooking

zones, e.g. to bring a large quantity of

water to the boil quickly.

The power function is activated for

10 minutes at most. After that the induc-

tion cooking zone automatically switch-

es back to heat setting 9.

If the power function has ended, the

cooking zones automatically switch

back to the heat setting set previ-

ously.

Control panel Display

To switch on Touch The light elements in the

control bar light up. The

display flashes

To switch off Select the heat setting

1-9

The heat setting selected

is shown in the display.

The display above

will

go out.

16 electrolux operating the appliance

Power Management

The cooking zones of the cooking sur-

face have a maximum power available

to them.

Two cooking zones make up a pair (see

figure).

So that the Power function can always

be carried out, Power Management may

reduce the power of the other cooking

zone in the pair

Example: heat setting 9 is selected on a

cooking zone. The Power function is

switched on for the cooking zone paired

up with it. The Power function is per-

formed, but heat setting 9 on one cook-

ing zone and Power function on the

other cooking zone of a pair exceeds

the maximum output for both. Therefore

Power Management reduces the first

cooking zone that was switched on from

9 to 7, for example, and the display for

this cooking zone alternates between 9

and 7 and then remains on the current

maximum of 7. (Whether the display al-

ternates between 9 and 7 or 9 and 6 or

other values, depends on the appliance

type and the size of the cooking zone.)

operating the appliance electrolux 17

Using the timer

If a heat setting is set on this cook-

ing zone in addition to a countdown

timer, the cooking zone is switched

off after the time set has elapsed.

If a cooking zone is switched off, the

timer function set is also switched

off.

Function Condition Outcome after the

time has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

18 electrolux operating the appliance

Selecting a cooking zone

If the pilot light is flashing more

slowly, the heat setting can be set or

modified.

If other timer functions are set, after

a few seconds the shortest remain-

ing time of all the timer functions is

displayed and the corresponding pi-

lot light flashes.

Step Control panel Display

1. To uch once Pilot light of the first cooking

zone flashes

2. To uch once Pilot light of the second cook-

ing zone flashes

3. To uch once Pilot light of the third cooking

zone flashes

4. To uch once Pilot light of the fourth cooking

zone flashes

operating the appliance electrolux 19

Setting the time

Switching off the timer function

Changing the time

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel Indicator

1. Select cooking zone Pilot light for the cooking zone selected

flashes

2. To uch or 00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel Indicator

1. Select cooking zone Pilot light of cooking zone selected flashes

faster

Time remaining is displayed

2. To uch The time remaining counts backwards to 00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Step Control panel Indicator

1. Select cooking zone Pilot light of the selected cooking zone

flashes faster

Time remaining is displayed

2. To uch or 01 to 99 minutes

After a few seconds, the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected

flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. To uch Acoustic signal to acknowledge.

Acoustic signal stops.

20 electrolux operating the appliance

Automatic switch off

Cooking surface

• If after switching on the cooking sur-

face, a heat setting is not set for a

cooking zone within approx. 10 sec-

onds, the cooking surface automati-

cally switches itself off.

• If one or more sensor fields are cov-

ered by objects (a pan, etc.) for long-

er than approx. 10 seconds, a signal

sounds and the cooking surface

switches off automatically.

• If all cooking zones are switched off,

the cooking surface automatically

switches itself off after approx.

10 seconds.

Control panel

• When the appliance is switched off, if

one or more of the sensor fields on

the control panel are covered for

more that 10 seconds, an acoustic

signal sounds. The acoustic signal

switches itself off automatically when

the sensor fields are no longer cov-

ered.

Induction cooking zones

• In the case of overheating (e.g. when

a saucepan boils dry) the cooking

zone automatically switches itself off.

is displayed. Before being used

again, the cooking zone must be set

to

0 and cooled down.

• If cookware that is not suitable is

used, lights up in the display and

after 2 minutes the indicator for the

cooking zone switches itself off.

• If one of the cooking zones is not

switched off after a certain time, or if

the heat setting is not modified, the

relevant cooking zone switches off

automatically. is displayed. Before

being used again, the cooking zone

must be set to .

Heat setting Switches off after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

tips on cooking and frying electrolux 21

Tips on Cooking and Frying

Information on acrylamides

According to the latest scientific

knowledge, intensive browning of

food, especially in products con-

taining starch, can constitute a

health risk due to acrylamides.

Therefore we recommend cooking

at the lowest possible temperatures

and not browning foods too much.

Cookware for induction cooking zones

Cookware material

Cookware for induction cooking

zones is labelled as suitable by the

manufacturer.

Suitability test

Cookware is suitable for induction cook-

ing, if …

• ... a little water on an induction cook-

ing zone set to heat setting 9 is heat-

ed within a short time.

• ... a magnet sticks to the bottom of

the cookware.

Certain cookware can make noises

when being used on induction cook-

ing zones. These noises are not a

fault in the appliance and do not af-

fect operation in any way.

Bottom of the cookware

The bottom of the cookware should be

as thick and flat as possible.

Cookware material Suitable

Steel, enamelled steel yes

Cast iron yes

Stainless steel if appropriately labelled by the manufacturer

Aluminium, copper, brass ---

Glass, ceramic, porcelain ---

Page is loading ...

Electrolux EHD60150P User manual

Electrolux EHD60150P User manual

in other languages

Related papers