Electrolux EHD6691X45C User manual

Page is loading ...

2

Dear Customer,

Please read these user instructions carefully and

keep them to refer to later.

Please pass the user instructions on to any future

owner of the appliance.

The following symbols are used in the

text:

1 Safety instructions

Warning! Information that affects your per-

sonal safety.

Important! Information that prevents damage

to the appliance.

3 Useful tips and hints

2 Environmental information

3

Contents

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the power function on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cookware for induction cooking zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Tips on energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installation proud of the work surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

4

Operating Instructions

1 Safety instructions

3

Please comply with these instructions. If you

do not, any damage resulting is not covered

by the warranty.

5 This appliance conforms with the following EU

Directives:

– 73/23/EEC dated 19.02.1973 Low Voltage Direc-

tive

– 89/336/EEC dated 03.05.1989 EMC Directive in-

clusive of Amending Directive 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Correct use

• This appliance should be used only for normal do-

mestic cooking and frying of food.

• The appliance must not be used as a work surface

or as a storage surface.

• Additions or modifications to the appliance are not

permitted.

Children’s safety

• Small children must be kept away from the appli-

ance.

• Only let bigger children work on the appliance un-

der supervision.

General safety

• The appliance may only be installed and connect-

ed by trained, registered service engineers.

• Built-in appliances may only be used after they

have built in to suitable built-in units and work sur-

faces that meet standards.

• In the event of faults with the appliance or damage

to the glass ceramic (cracks, scratches or splits),

the appliance must be switched off and discon-

nected from the electrical supply, to prevent the

possibility of an electric shock.

• Repairs to the appliance must only be carried out

by trained registered service engineers.

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used

carelessly.

• Cables from electrical appliances must not touch

the hot surface of the appliance or hot cookware.

• Overheated fats and oils can ignite quickly. When

cooking with fat or oil (e.g. chips) do not leave the

appliance unattended.

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep

their upper body at least 30 cm from induction

cooking zones that are switched on.

Safety when cleaning

• For cleaning, the appliance must be switched off

and cooled down.

• For safety reasons, the cleaning of the appliance

with steam jet or high-pressure cleaning equip-

ment is not permitted.

How to avoid damage to the appli-

ance

• The glass ceramic can be damaged by objects fall-

ing onto it.

• The edge of the glass ceramic can be damaged by

being knocked by the cookware.

• Cookware made of cast iron, cast aluminium or

with damaged bottoms can scratch the glass ce-

ramic if pushed across the surface.

• Objects that melt and things that boil over can

burn onto the glass ceramic and should be re-

moved straightaway.

• Do not use the cooking zones with empty cook-

ware or without cookware.

• The ventilation gap of 5mm between the worktop

and front of the unit underneath it must not be cov-

ered.

5

Description of the Appliance

Cooking surface layout

Control panel layout

Induction cooking zone 2200W

with power function 3000W

Induction cooking zone 1200W

with power function 1500 W

Induction cooking zone 1800 W

with power function 2300 W

Control panel

Induction cooking zone 1800 W

with power function 2300 W

On/Off

with power indicator

Heat setting selection

Timer

Timer display

Lock

Cooking zone indicators

Timer function

Power function

Display

6

Touch Control sensor fields

The appliance is operated using Touch Control sen-

sor fields. Functions are controlled by touching sen-

sor fields and confirmed by displays and acoustic

signals.

Touch the sensor fields from above, without covering

other sensor fields.

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. Af-

ter being switched off, the cooking zones need

some time to cool down. Look at the residual

heat indicator

h .

3 Residual heat can be used for melting and

keeping food warm.

The induction cooking zones create the heat re-

quired for cooking directly in the base of the cook-

ware. The glass ceramic is merely heated by the

residual heat of the cookware.

The cooling fan switches itself on and off depending

upon the temperature of the electronics.

Sensor field Function

On / Off To switch the appliance on and off

Increase settings Increasing heat setting/time

Decrease settings Decreasing heat setting/time

Timer Timer selection

Lock Locking/unlocking the control panel

Power Switching the power function on and off

Display Description

¾ Cooking zone is switched off

u Keep warm setting Keep warm setting is set

¿ - Ç Heat settings Heat setting is set

a Automatic warm up function Automatic warm-up function is activated

e Fault Malfunction has occurred

f Pan detection Cookware is unsuitable or too small or no cookware

has been placed on the cooking zone

h Residual heat Cooking zone is still hot

l Child safety device Lock/child safety device is engaged

p Power Power function is switched on

_ Safety cut-out Safety cut-out has been activated

7

Operating the appliance

3

Use the induction cooking zones with suitable

cookware.

Switching the appliance on and off

3 After switching on, within approx. 10 seconds

a heat setting or a function must be set, other-

wise the appliance automatically switches it-

self off.

Setting the heat setting

Control panel Display Pilot light

Switch on Touch for 2 seconds

¾ lights up

Switch off Touch for 1 second

h / none goes out

Control panel Display

Increase Touch

u to Ç / p

Decrease Touch Ç to ¾

Switch off Touch and at the same time ¾

8

Using the automatic warm-up function

All cooking zones are equipped with an automatic

warm-up function. The automatic warm-up function

sets the cooking zone to the highest setting for a

certain period of time and then automatically switch-

es back to the cooking setting that was originally set.

3 If during the automatic warm up a a higher

heat setting is selected, e.g. from

Á to Ã, the

automatic warm up is adjusted.

3 If there is still residual heat on the cooking

zone (display

h), the automatic warm up is

not performed.

The length of time that the automatic warm up func-

tion operates depends on the heat setting selected.

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off”

sensor field, can be locked at any time in order to

prevent the settings being changed e.g. by wiping

over the panel with a cloth.

3 When you switch the appliance off, the locking

function is automatically switched off.

Step Control panel Display

1. Setting the level

Ç / p Ç / p

2. Place to one side for a moment Ç / p

3. touch a

4. touch in order to set the desired cooking setting

Æ until ¿ / u

after 3 seconds

a

Control panel Display

Switch on Touch

l (for 5 seconds)

Switch off Touch previously set heat setting

Heat setting Length of the automatic warm up [min:sec]

v 0:10

1 0:10

2 0:10

3 3:10

4 5:50

5 10:10

6 2:00

7 2:30

8 2:50

9 ---

9

Using the child safety device

The child safety device prevents unintentional use of

the appliance.

Setting the child safety device

Releasing the child safety device

Overriding the child safety device

The child safety device can be released in this way

for a single cooking session; it remains activated af-

terwards.

Step Control panel Display/Signal

1. Switch on the appliance

(Do not set a heat setting)

¾

2. Touch until the signal sounds Acoustic signal

3. Touch

l

Appliance switches off.

Step Control panel Display/Signal

1.

Switch on the appliance l

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off.

Step Control panel Display/Signal

1. Switch on the appliance

l

2. Touch and at the same time

¾ / acoustic signal

Until the appliance is next switched off, it can used as normal.

10

Switching the power function on and off

The power function makes more power available

to the cooking zones, e.g. to bring a large quantity of

water to the boil quickly.

The power function is activated for 10 minutes. After

that the cooking zone automatically switches back to

heat setting 9.

Power Management

The cooking zones have a maximum power available

to them.

If this power range is exceeded by switching on the

power function, Power Management reduces the

heat setting of another cooking zone.

The display for this cooking zone alternates for two

minutes between the set heat setting and the maxi-

mum possible heat setting. Thereafter the actual

heat setting is displayed.

Example:

3 If the power function has ended, the cooking

zones automatically switch back to the heat

setting set previously.

Control panel Display

Switch on Touch

p

Switch off Touch

Ç

Touch

Ç

Last

cooking zone switched

on

Other cooking zone

set

heat setting

set

heat setting

display actual

heat setting

p 9 6 alternating with 96

11

Using the timer

All cooking zones can use each use one of the two

timer functions at the same time.

3 If a cooking zone is switched off, the timer

function set is also switched off.

3 If a heat setting is set on this cooking zone in

addition to a countdown timer, the cooking

zone is switched off after the time set has

elapsed.

Selecting a cooking zone

3 If the pilot light is flashing more slowly, the

heat setting can be set or modified.

3 If other timer functions are set, after a few sec-

onds the shortest remaining time of all the tim-

er functions is displayed and the

corresponding pilot light flashes.

Function Condition Outcome after the time has

elapsed

Safety cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches off

Countdown timer cooking zones not in use acoustic signal

00 flashes

Step Control panel Display

1. Touch once Pilot light of the first cooking zone flashes

2. º Touch once Pilot light of the second cooking zone flashes

3. Touch once Pilot light of the third cooking zone flashes

4. Touch once Pilot light of the fourth cooking zone flashes

12

Setting the time

Switching off the timer function

Changing the time

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel field Display

1.

Select cooking zone Pilot light of the cooking zone selected flashes

2. Touch or for the cooking

zone selected

00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1.

Select cooking zone Pilot light of the cooking zone selected flashes faster

The time remaining is displayed

2. Touch for the cooking zone

selected

The time remaining counts down to 00.

The pilot light goes out.

The timer function for the selected cooking zone is switched off.

Step Control panel field Display

1.

Select cooking zone Pilot light of the cooking zone selected flashes faster

The time remaining is displayed

2. Touch or for the cooking

zone selected

01 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch

Acoustic signal to acknowledge.

Acoustic signal stops.

13

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat

setting is not set for a cooking zone within approx.

10 seconds, the cooking surface automatically

switches itself off.

• If one or more sensor fields are covered for longer

than approx. 10 seconds, e.g. by a pan placed

upon it, a signal sounds and the cooking surface

switches off automatically.

• If all cooking zones are switched off, the cooking

surface automatically switches itself off after ap-

prox. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over

onto the control panel immediately switches

all cooking zones off.

Cooking zones

• In the event of overheating (e.g. when a pan boils

dry) the cooking zone automatically switches itself

off. _ is displayed. Before being used again, the

cooking zone must be set to 0 and allowed to cool

down.

• If cookware that is not suitable is used, f flashes

in the display and after 10 minutes the display for

the cooking zone switches itself off.

• If one of the cooking zones is not switched off after

a certain time, or if the heat setting is not modified,

the relevant cooking zone switches off automati-

cally.

Heat setting Switches off after

V, 1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

14

Tips on Cooking and Frying

3

Information on acrylamides

According to the latest scientific knowledge,

intensive browning of food, especially in prod-

ucts containing starch, can constitute a health

risk due to acrylamides. Therefore we recom-

mend cooking at the lowest possible tempera-

tures and not browning foods too much.

Cookware for induction cooking zones

3 Cookware for induction cooking zones is la-

belled as suitable by the manufacturer.

Test of suitability

Cookware is suitable for induction, if …

• ... a little water is heated on an induction cooking

zone set to heat setting 9 within a few seconds.

• ... a magnet sticks to the bottom of the cookware.

3 Certain cookware can make noises when be-

ing used on induction cooking zones. These

noises are not a fault in the appliance and do

not affect operation in any way.

Pan size

Induction cooking zones adapt automatically to the

size of the cookware bottom up to a certain limit.

However the magnetic part of the cookware bottom

must have a minimum diameter depending upon the

size of the cooking zone.

3 The cookware must be placed centrally on the

cooking zone.

Cookware made of suitable

Steel, enamelled steel yes

Cast iron yes

Stainless steel if appropriately labelled by the manufacturer

Aluminium, copper, brass ---

Glass, ceramic, porcelain ---

15

Tips on energy saving

2 Place cookware on the cooking zone before it

is switched on.

2 If possible, always place a lid on the cook-

ware.

Examples of cooking applications

The information given in the following table is for guidance only.

The power function is suitable for heating large

quantities of liquid.

Heat

setting

Cooking-

process

suitable for Cooking time Tips/Hints

0 Off position

u

Keeping

food warm

Keeping cooked foods warm as required Cover

1-2

Melting

Hollandaise sauce,

melting butter, chocolate, gelatine

5-25 mins. Stir occasionally

Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on

2-3

Simmering

on low heat

Simmering rice and milk-based

dishes

Heating up ready-cooked meals

25-50 mins.

Add at least twice as much

liquid as rice, stir milk dishes

part way through cooking

3-4

Steaming

Braising

Steaming vegetables, fish

braising meat

20-45 mins.

With vegetables add only a lit-

tle liquid (a few tablespoons)

4-5 Boiling

Steaming potatoes 20-60 mins.

Use only a little liquid, e. g.:

max.

¼ l water for

750 g potatoes

Cooking larger quantities of food,

stews and soups

60-150 mins.

Up to 3 l liquid plus ingredi-

ents

6-7

Gentle

Frying

Frying escalopes, veal cordon

bleu, cutlets, rissoles, sausages,

liver, roux, eggs, pancakes,

doughnuts

Steady frying Turn halfway through cooking

7-8

Heavy

Frying

Hash browns, loin steaks, steaks,

Flädle (pancakes for garnishing

soup)

5-15 mins.

per pan

Turn halfway through cooking

9

Boiling

Searing

Deep frying

Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),

deep frying chips

16

Cleaning and Care

1

Take care! Risk of burns from residual heat.

Let the appliance cool down.

1 Warning! Sharp objects and abrasive cleaning

materials will damage the appliance. Clean

with water and washing up liquid.

1 Warning! Residues from cleaning agents will

damage the appliance. Remove residues with

water and washing up liquid.

Cleaning the appliance after each

use

1. Wipe the appliance with a damp cloth and a little

washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposits

1. Place a scraper on the glass ceramic surface at an

angle.

2. Remove residues by sliding the blade over the sur-

face.

3. Wipe the appliance with a damp cloth and a little

washing up liquid.

4. Rub the appliance dry using a clean cloth.

*Scrapers and cleaners for glass ceramic and stainless steel

can be purchased in specialist shops

3 Remove stubborn residues with a cleaner for

glass ceramic or stainless steel.

3 Scratches or dark stains on the glass ceramic

that cannot be removed do not however affect

the functioning of the appliance.

Remove

Type of dirt

immedi-

ately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass ceramic

or stainless steel*

fat splashes --- yes

shiny metallic discolorations --- yes

17

What to do if …

Problem Possible cause Remedy

The cooking zones will not switch

on or are not functioning

More than 10 seconds have passed

since the appliance was switched

on

Switch the appliance on again.

The lock is switched on

l Switch off the lock (See the section

“Locking/unlocking the control

panel”)

The child safety device is switched

on

l

Deactivate the child safety device

(See the section “Child safety de-

vice”)

Several sensor fields were touched

at the same time

Only touch one sensor field

The sensor fields are partly covered

by a damp cloth or with liquid

Remove the cloth or the liquid.

Switch the appliance on again.

Safety cut-out has been triggered Switch the appliance on again

The residual heat indicator is not

displaying anything

The cooking zone was only on for

a short time and is therefore not

hot

If the cooking zone is supposed to

be hot, call the Customer Service

Department.

The automatic warm up function is

not switching itself on

There is still residual heat on the

cooking zone h

Let the cooking zone cool down

The highest heat setting is set Ç The highest heat setting has the

same power as the automatic warm

up function

The heat setting was set using the

sensor field

1.Switching off the cooking zone

2.Set the cooking zone using the

sensor field

Repeated acoustic signal (6x), ap-

pliance switches off

One or more sensor fields have

been covered for longer than 10

seconds

Uncover sensor field

Acoustic signal sounds and appli-

ance switches itself on and then off

again; after 5 seconds another

acoustic signal sounds

The On/Off sensor field has been

covered up, e.g. by a cloth

Do not place any objects on the

control panel

Display is switching between two

heat settings

Power management is reducing the

power of this cooking zone

See the section “Switching the

power function on and off”

f flashes Unsuitable cookware Use suitable cookware

No cookware on the cooking zone Place cookware on the cooking

zone

The diameter of the bottom of the

cookware is too small for the cook-

ing zone

Move onto a smaller cooking zone

Use suitable cookware

_ is lit Overheating protection for the

cooking zone has been triggered

Switch off the cooking zone.

Switch the cooking zone on again

e and number are displayed Electronics fault Disconnect the appliance from the

electrical supply for a few minutes

(Take the fuse out of the house’s

wiring system)

If after switching on again,

e is dis-

played again, call the customer

service department

18

If you are unable to remedy the problem by fol-

lowing the above suggestions, please contact

your dealer or the Customer Care Department.

1 Warning! Repairs to the appliance are only to

be carried out by qualified service engineers.

Considerable danger to the user may result

from improper repairs.

3 If the appliance has been wrongly operated,

the visit from the customer service technician

or dealer may not take place free of charge,

even during the warranty period.

Disposal

2

Packaging material

The packaging materials are environmentally

friendly and can be recycled. The plastic com-

ponents are identified by markings, e.g. >PE<,

>PS<, etc. Please dispose of the packaging

materials in the appropriate container at the

community waste disposal facilities.

2 Old appliance

Please dispose of your old appliance in line

with the guidelines for disposal in your com-

munity.

19

Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in

force in the country of use are to be followed (safety

regulations, proper recycling in accordance with the

regulations, etc.)

Installation may only be carried out by a qualified

electrician.

The minimum distances to other appliances are to be

observed.

Drawers may only be installed with a with protec-

tive floor directly under the appliance.

The cut surfaces of the work top are to be protected

against moisture using a suitable sealant.

The sealant seals the appliance to the work top with

no gap.

When building in, protect the underside of the appli-

ance from steam and moisture, e.g. from a dish-

washer or oven.

Avoid installing the appliance next to doors and un-

der windows. Otherwise hot cookware may be

knocked off the rings when doors and windows are

opened.

1 WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct in-

stallation by a qualified electrician.

• The appliance must be connected to the electrical

supply by a qualified electrician.

1 IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connec-

tions can make the terminal overheat.

• Have the clamping joints correctedly installed by a

qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connec-

tion, the appropriate mains cable of type H05BB-F

Tmax 90° (or higher) must be used.

• If this appliance’s mains cable is damaged, it must

be replaced by a special cable (type H05BB-F

Tmax 90°; or higher). The latter is available from

the Customer Care Department.

A device must be provided in the electrical installa-

tion which allows the appliance to be disconnected

from the mains at all poles with a contact opening

width of at least 3 mm.

Suitable isolation devices include line protecting cut-

outs, fuses (screw type fuses are to be removed from

the holder), earth leakage trips and contactors.

20

Installation proud of the work surface

• Clean the worktop around the cut-out area.

• Stick the single-sided adhesive sealing tape pro-

vided on the underside of the hob around the out-

side edge ensuring that it is not stretched. The two

ends of the tape should join in the middle of one

side. After trimming the tape (allow it to overlap by

2-3 mm), press the two ends together.

21

Service

In the event of technical faults, please first check

whether you can remedy the problem yourself with

the help of the operating instructions (section “What

to do if…”).

If you were not able to remedy the problem yourself,

please contact the Customer Care Department or

one of our service partners.

In order to be able to assist you quickly, we require

the following information:

– Model description

– Product number (PNC)

– Serial number (S No.)

(for numbers see rating plate)

– Type of fault

– Any error messages displayed by the appliance

– three digit letter-number combination for glass ce-

ramic

So that you have the necessary reference numbers

from your appliance at hand, we recommend that

you write them in here:

Model description: .....................................

PNC: .....................................

S No: .....................................

Page is loading ...

Electrolux EHD6691X45C User manual

Electrolux EHD6691X45C User manual

in other languages

Related papers