Renkforce 1305414 Owner's manual

Brand: Renkforce

Model: 1305414

Category: Coffee making accessories

Type: Owner's manual

Page is loading ...

Operating instructions

LED under-cabinet luminaire

Item no. 1305414 (8 W)

Item no. 1305415 (12 W)

Intended use

The product is intended for illuminating indoor areas. The product allows for several

luminaires of identical construction to be operated in series.

It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in

bathrooms, must be avoided under all circumstances.

For safety and approval purposes (CE), you must not rebuild and/or modify this product.

If you use the product for purposes other than those described above, the product may

be damaged. In addition, improper use can cause hazards such as short circuiting,

re, electric shock etc. Read the instructions carefully and keep them. Make this

product available to third parties only together with its operating instructions.

This product complies with the statutory national and European requirements. All

company names and product names are trademarks of their respective owners. All

rights reserved.

Delivery content

• Under-cabinet luminaire

• Mains cable

• Connection cable

• Mounting material

• Operating instructions

Explanations of symbols

The symbol with a ash in a triangle indicates health risks e.g. due to electric

shock.

This symbol warns you about specic risks when handling, operating or

using the product.

The “arrow” symbol indicates special remarks and notes for operation.

The light is not dimmable.

The product is only intended for use in dry indoor areas.

This product features a protection class II design.

Follow the operating instructions!

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information on

proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the

warranty/guarantee.

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may

become dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong

jolts, high humidity, moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of

operation and protect it from any accidental use. Safe operation can no

longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a

low height can damage the product.

• Attention, LED light:

- Do not look directly into the LED light!

- Do not look into the beam directly or with optical instruments!

• Operate the product only via a common household power supply of

220 – 240 V/AC, 50/60 Hz.

• The product is only suitable for xed installation. Do not install the product

in vehicles.

• Do not operate the product with a dimmer.

• Only use the provided connection cable if you want to interconnect

several luminaires via cable.

• The protective cap on the output of the luminaire (or of the last luminaire

if connected in series) must not be removed.

• Never exceed the maximum permissible number of luminaires if

connected in series.

• Only interconnect luminaires of identical design and same wattage. Never

interlink luminaires of dierent wattage.

• Do not install the product on electrically conductive surfaces.

• Do not attach any objects (e.g. decorative material) to the product.

• If the product has been exposed to moisture, disconnect the mains plug

from the wall socket. Let the product dry completely before using it again.

• The mains outlet must be located near to the device and be easily

accessible.

• Never pull the mains plug from the socket by pulling at the cable. Always

pull it from the mains socket using the intended grips.

• Unplug the mains plug from the mains socket if you do not use the device

for an extended period of time.

• For safety reasons, always unplug the device in case of a thunderstorm.

• Make sure that the mains cable is not squeezed, bent, damaged by sharp

edges or put under mechanical stress. Avoid excessive thermal stress on

the mains cable from extreme heat or cold. Do not modify the mains cable.

Otherwise the mains cable may be damaged. A damaged mains cable can

cause a deadly electric shock.

• Do not touch the mains cable if it is damaged. First, power down the

respective mains socket (e.g. via the respective circuit breaker) and then

carefully pull the mains plug from the mains socket. Never use the product

if the mains cable is damaged.

• To prevent risks, damaged power cables may only be replaced by the

manufacturer, a professional workshop appointed by the manufacturer, or

a similarly qualied person.

• Never plug in or unplug the mains plug when your hands are wet.

• For installations in industrial facilities, follow the accident prevention

regulations for electrical systems and equipment of the government

safety organization or the corresponding authority for your country.

• Consult an expert when in doubt about operation, safety or connection of

the device.

• Maintenance, modications and repairs are to be performed exclusively

by an expert or at a qualied shop.

• If you have questions which remain unanswered by these operating

instructions, contact our technical support service or other technical

personnel.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the

technical status at the time of printing.

Installation and connection

Implicitly observe the correct order of all installation steps. Only at the nal

step may the mains plug be connected to the wall socket.

If connecting several luminaires in series, observe the maximum permissible

number of luminaires:

Item no. 1305414: max. 22 luminaires in series

Item no. 1305415: max. 12 luminaires in series

• Select a suitable installation location and draw a horizontal line. Mark the position

of the 2 bore holes on that line.

When drilling or tightening screws, make sure not to damage any cables,

wires or pipes located underneath the surface.

• Drill the two holes and insert the dowels.

• Attach the two retaining clips using the screws provided. Do not over tighten the

screws, but leave some clearance for ne adjustment.

• Insert the product into the retaining clips. Make sure the product sits securely and

cannot fall down.

• Install further luminaires as described above.

The luminaires can be inserted to one another or be connected using the

short cable provided. To do so, remove the protective cap from the output

(except for the last luminaire if connected in series).

• Connect the mains cable to the luminaire (or rst luminaire if connected in series).

• Connect the power plug to a common household power outlet.

Operation

• Use the toggle switch to turn the luminaire on/o.

• Luminaires connected in series can be switched individually.

Maintenance and cleaning

Never use aggressive or abrasive cleaning agents, rubbing alcohol or other

chemical solvents, as those can damage the housing or even aect the

operation of the product.

• This product does not require maintenance. Maintenance or repairs may be carried

out by a professional only.

• The LED illuminants are integral and cannot be replaced.

• Switch o the product before cleaning, disconnect the mains plug from the wall

socket, and let the product cool down to room temperature.

• Use a clean, soft, dry cloth to clean the product. You can easily remove dust using a

clean, soft brush or a vacuum cleaner.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the

relevant statutory regulations.

You thus full your statutory obligations and contribute to the protection of

the environment.

Technical data

Operating voltage................................220 – 240 V/AC, 50/60 Hz

Power consumption............................8 W (Item no. 1305414)

12 W (Item no. 1305415)

Illuminant .............................................. 77 x LED (Item no. 1305414)

112 x LED (Item no. 1305415)

Luminous ux ....................................... 650 lm (Item no. 1305414)

900 lm (Item no. 1305415)

Colour temperature.............................4000 K

Protection type ....................................IP20

Protection class ..................................II

Cable length .........................................1.8 m

Operating conditions ..........................-25 to +45 ºC, 20 – 70 % RH

Storage conditions..............................-25 to +40 ºC, 20 – 70 % RH

Dimensions (W x H x D)......................518 x 28 x 35 mm (Item no. 1305414)

889 x 28 x 35 mm (Item no. 1305415)

Weight ...................................................approx. 320 g (Item no. 1305414)

approx. 420 g (Item no. 1305415)

Page is loading ...

Renkforce 1305414 Owner's manual

Brand: Renkforce

Model: 1305414

Category: Coffee making accessories

Type: Owner's manual

Download PDF

report

in other languages

français: Renkforce 1305414 Le manuel du propriétaire
Deutsch: Renkforce 1305414 Bedienungsanleitung
Nederlands: Renkforce 1305414 de handleiding

Renkforce 1305414 Owner's manual

Renkforce 1305414 Owner's manual

in other languages

Related papers

Other documents