Whirlpool AWA 1055 Owner's manual

Brand: Whirlpool

Model: AWA 1055

Category: Washing machines

Type: Owner's manual

This manual is also suitable for

AWA 1155

Whirlpool AWA 1055

Washing Programs: Whirlpool AWA 1055 offers an array of washing programs tailored to various fabrics and degrees of soiling. You can choose from programs designed for cotton, synthetics, wool, silk, delicate items, and even a quick 30-minute cycle for lightly soiled clothes.
Temperature Settings: The temperature selector knob allows you to adjust the water temperature for each program. You can select cold water for delicate fabrics, warm water for regular washes, and hot water for heavily soiled items.
Spin Speed Options: After the washing cycle, you can select the desired spin speed to remove excess water from your clothes. The spin speed selector offers various options, including 1000 RPM, 800 RPM, and a gentle spin cycle for delicate fabrics.

Whirlpool AWA 1055

Washing Programs: Whirlpool AWA 1055 offers an array of washing programs tailored to various fabrics and degrees of soiling. You can choose from programs designed for cotton, synthetics, wool, silk, delicate items, and even a quick 30-minute cycle for lightly soiled clothes.
Temperature Settings: The temperature selector knob allows you to adjust the water temperature for each program. You can select cold water for delicate fabrics, warm water for regular washes, and hot water for heavily soiled items.
Spin Speed Options: After the washing cycle, you can select the desired spin speed to remove excess water from your clothes. The spin speed selector offers various options, including 1000 RPM, 800 RPM, and a gentle spin cycle for delicate fabrics.

5019 100 12605

Programme Type of fabrics / Degree of soiling / Notes Max.

Load

Detergent and Additives Options Temperature

Selector

°C

Maximum

technical

Spin

Speed

rpm/min

Recommended

Spin Speed

rpm/min

Programme

duration

approx.

min

Pre-

wash

Wash Softener

Bleach

Intensive

Rinse

Hold

Pre-

wash

Start

Delay

Cotton

Coton

Averagely soiled, hard wearing and temperature stable

textiles in cotton and linen (bed linen, table linen, underwear,

shirts etc.). The max. load for heavily soiled laundry is 3,5 kg.

5.0 Yes Yes

❉ ❉ ❉ ❉❉❉

Cold to 90 1000 1000 120

Coloured

Cotton

Couleurs

Averagely soiled, hard wearing and temperature stable

textiles in cotton and linen (bed linen, table linen, underwear,

shirts etc.).

5.0 Yes Yes

❉

—

❉ ❉❉❉

Cold to 60 1000 800 to 1000 120

Synthetics

Synthétiques

Lightly or averagely soiled blouses, skirts, etc. made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

cotton blends.

2.0 Yes Yes

❉

—

❉ ❉❉❉

Cold to 60 800 600 to 700 120

Chrono 30 min

Lightly soiled cotton, cotton blends, synthetics and delicates 3.0

—

Yes

❉

——

❉

—

❉

30 1000 600 to 700 30

Delicate

Délicat

Delicate curtains, dresses, skirts and blouses. 1.5 Yes Yes

❉

——

❉❉❉

Cold to 40 800 100 to 500 45

Wool

Laine

Only machine washable woollens with pure new wool label.

If you select the special function “Rinse Hold” do not leave

garments to soak for too long.

1.0

—

Yes

❉

——

❉

—

❉

Cold to 40 800 100 to 500 45

Silk

Soie

Machine washable silk and viscose articles.

No spin, drain only.

1.0

—

Yes

❉

——

❉

—

❉

Cold to 30

——

Rinse+Spin

Rinçage +

Essorage

Programme for treating wash with starch or softener.

Terminates with an intensive spin cycle.

5.0

——

❉

—

❉❉

—

❉

—

1000 800 to 1000 30

Long Spin

Essorage long

Programme for Intensive spin cycle. 5.0

——

—————

❉

—

1000 800 to 1000 15

Spin

Essorage

Programme for gentle spin cycle. 1.5

——

—

————

❉

—

800 100 to 500 5

Drain

Vidange

Drain only, without spin cycle. Alternative way of terminating

programmes with “Rinse Hold/Spin Delay” setting.

—

——

—

————

❉

—

——

1) Programme duration figures

(guideline) are valid for

maximum temperature wash

with no special functions.

Wool

Silk

Off position

Water tap

PROGRAMME TABLE

AWA 1055/1155

N.B. This appliance is controlled by sensors. The excess of detergent in the dispenser could cause technical problems.

5019 100 12605

Prewash cycle increases programme duration by 5 to 15 min. Consumption values were measured in normalized

conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values

in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the chamber as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

• Be careful not to fill more than the

“MAX”

level mark.

• For programme with pre-wash: do not use liquid detergents.

• For programmes without prewash from cold to 40° C it is recommended to use a liquid detergent

to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Turn the

programme selector knob

to the desired programme.

2. The remaining time indication lights up and the “Start” button is flashing.

3. Turn the

temperature knob

to the required temperature.

4. Turn the

spin speed selector

to the required setting.

PRESS ANY DESIRED OPTION BUTTON(S). The pilot lamp lights up.

“Intensive Rinse” button

• For improved rinsing efficiency the rinse water level and the cycle time are increased.

• This option is particularly suitable for areas with very soft water washing baby linen and helps

people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing

and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicate”.

• This function is particularly useful if you want to postpone spinning to a later time.

Note: The programme is stopped in “Rinse Hold” at the time the “Rinse Hold” button flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin

cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the drain programme

and push the “Start” button.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible.

• The cycle time increases from 5 to 15 min.

START DELAY BUTTON

• Select the programme and the option (if necessary). The remaining time indication lights up;

• Press the “Start Delay” button to select the delay time by 2, 4, 6, 8 hours;

• Press the “Start” button. The “Start Delay” light flashes until the programme starts.

• The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”.

• Turn the programme selector to the “ ” position.

PROGRAMME START

Open the tap and press the “Start” button. The pilot lamp lights up.

DOOR LOCK

During the running programme the door can be opened for adding further laundry.

The door locks automatically in all rinsing and spinning cycles. If the programme is stopped or the

electrical power supply is terminated, the door lock will open after approximately 1 minute.

Note:

If you open the door during the programme, the “Start” button is flashing. Press it again to

continue the cycle.

PROGRAMME END

• The rest time display is on “End”.

1. Turn the programme selector to the

“ ”

position.

2. Turn the water supply tap off.

3. Open the door and the drum flaps and unload the machine.

CHANGE THE PROGRAMME AND OPTIONS AFTER PROGRAMME START

1. Press the “Start” button to pause the programme. The light flashes.

2. Select the new programme, temperature, spin speed or options.

3. Press the “Start” button to start the programme again.

TO CANCEL A PROGRAMME BEFORE THE END

1. Press the “Start” button to pause the programme. The light flashes.

2. Set the programme selector to “Drain”.

3. Press the “Start” button to start the drain programme.

The door is unlocked as soon as the rest time display is on “End”.

AUTOMATIC SAFETY FUNCTIONS / FAULTS

This washing machine is equipped with automatic safety functions which detect and diagnose faults at

an early stage and react appropriately. Often, however, the faults detected are small enough to be

solved in a matter of minutes. For example:

• The washing machine will not start.

• The additive products are not being fully washed out of the detergent dispenser.

• The washing machine is unstable during the spin cycle.

• The washing machine does not spin at the end of the programme.

Information about the above problem can be found in the “Troubleshooting Guide”.

What should I do when the automatic safety detects a malfunction?

The programme is interrupted and the fault is indicated as follows:

CONSUMPTION DATA

Programme Temperature

selector (°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

duration (min)

Cotton 90 5.0 49 1.60 120

Coloured Cotton 60 5.0 48 1.15 120

Synthetics 60 2.0 54 0.70 120

Synthetics 40 2.0 50 0.50 80

Chrono 30 min 30 3.0 35 0.40 30

Delicate 40 1.5 50 0.50 45

Wool 40 1.0 50 0.50 45

Silk 30 1.0 35 0.40 35

Indicators flashing Solution

Remaining time indication and water tap

See “No or insufficient water supply”.

Remaining time indication Other faults (see “Troubleshooting Guide”)

Whirlpool AWA 1055 Owner's manual

Brand: Whirlpool

Model: AWA 1055

Category: Washing machines

Type: Owner's manual

This manual is also suitable for

AWA 1155

Whirlpool AWA 1055

Washing Programs: Whirlpool AWA 1055 offers an array of washing programs tailored to various fabrics and degrees of soiling. You can choose from programs designed for cotton, synthetics, wool, silk, delicate items, and even a quick 30-minute cycle for lightly soiled clothes.
Temperature Settings: The temperature selector knob allows you to adjust the water temperature for each program. You can select cold water for delicate fabrics, warm water for regular washes, and hot water for heavily soiled items.
Spin Speed Options: After the washing cycle, you can select the desired spin speed to remove excess water from your clothes. The spin speed selector offers various options, including 1000 RPM, 800 RPM, and a gentle spin cycle for delicate fabrics.

Download PDF

report

Whirlpool AWA 1055 Owner's manual

This manual is also suitable for

Whirlpool AWA 1055 Owner's manual

Related papers

Other documents