GTV, ul. Przejazdowa 21, 05-800 Pruszków, tel. 22 444 75 00, fax 22 444 75 03, www.gtv.com.pl
OPERATING INSTRUCTIONS
Desktop power strip.
Isolate the 230 V AC mains before attempting to install the product. Installation and maintenance sho-
uld only be performed by trained electrical engineers approved according to local work safety regu-
lations. Any modications of the product or failure to comply with the manual shall void the product
warranty. When installing this product, always mind the safety of all nearby persons.
BASIC INFORMATION:
1. INSTALLATION
• Read and understand this manual before installing the pop-up desktop power strip.
Caution! Do not use outdoor. Before connecting the power strip cord plug to a mains outlet, verify that the mains ratings meet the ratings specied
on the product packaging label. If the power strip cord is damaged, immediately and carefully unplug it from the mains. Do not use the power strip
if its power cord is damaged. Do not repair the power cord. Have it replaced by a licensed and qualied person.
Keep the product away from unauthorized persons and children. The product is supplied with 230 V AC /
50–60 Hz mains voltage. Any unauthorized repair or modication of the product will void its warranty. Keep the product away from water or other
electrically conductive materials (including metal); otherwise a hazard of injury or death will occur.
The cylindrical pop-up desktop power strip with three mains outlets is intended for direct installation in oce furniture tops and kitchen tops.
2. ASSEMBLY
Before installing the product, make an installation opening in the desktop to accommodate the product. The opening diameter should be 5,5 cm
(55 mm). With the installation opening ready, remove the mounting ring from the power strip by turning it anticlockwise. Put the power strip in the
installation opening (by passing the power cord through rst), and align the position. Pass the mounting ring over the power cord and the power
strip. Tighten the ring rmly (clockwise) against the underside of the installation surface. Plug the power strip cord into a PE mains outlet.
3. USE
The power strip pops up when the button located on its top is pressed. Next, pull up the power strip to stop.
The product complies with the requirements of EU Directives and their transpositions into the national law. See the website at www.gtv.com.pl and the Declarations of Conformity for detailed information.
Index Model Material Type Colour Max.
power (W)
Max.
current (A)
Net
weight
(kg)
Gross
weight
(kg)
EAN
AE-BPW3UK60-20
UK Aluminium/
plastic
socket UK Black
3000 10
0,8 0,83
5901867127433
AE-BPW3UK60-80 socket UK Silver 5901867127440
AE-BPW3UK60U-20 socket UK, 2xUSB Black
0,65 0,82
5901867196835
AE-BPW3UK60U-80 socket UK, 2xUSB Silver 5901867196842
EN
Note!
GTV is not liable for any damage
resulting from incorrect
installation.
max
3000W
50/60
Hz
230V
AC
1,5m
IP20
max
10 A
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bachmann 915.500 Datasheet
-
B&R Industries Power Panel 300 User manual
-
Philips 221S3UCS/00 User manual
-
VESPA 633845 EN User manual
-
-
Globalsat GTV-380 User manual
-
ETS-Lindgren 2080/2081 Owner's manual
-
Atlas Copco QAS 275-325 User manual
-
Windsor Sensor S2 12 HEPA (120V) Owner's manual
-
Kärcher CVU 120V Operating Instructions Manual
