Q&Q D038 User manual

Brand: Q&Q

Model: D038

Type: User manual

INSTRUCTION MANUAL

LOCATIONS OF CONTROL

1. HR / MONTH

2. MIN / DATE

3. 12HR / 24HR / YEAR

4. LOCK / TIME SET / CALENDAR

5. °C / °F

6. RESET

Specifications

•Weather forecast and indoor temperature .

•Centigrade or Fahrenheit readout.

•Hour and minute display.

•12 or 24-hour format.

•Calendar with day-of-the-week

 display from July 1, 1997 to

 December 31, 2039.

•Battery life: approximate 1 year.

 (with alkaline batteries)

•Operating temperature from 0°C to 40°C (32°F to 104°F)

•Temperature measuring range from -50°C to 70°C (-58°F to 158°F)

•Temperature resolution 0.1°C (0.2°F)

Getting Started

Insert the batteries

•Open the battery cover of the Weather Forecast Station.

•Insert batteries in proper polarity (+) and (-) as indicated.

•Close the battery cover.

Notes: Do not use old batteries or different types of batteries together.

Wall mounting or using the stand

Wall mounting

•You can mount your Weather Forecast Station on a wall using a

 screw (not included) that fits into the keyhole slot on the back of

 the Weather Forecast Station.

•Drive the screw into the wall until the head extends about 1/8 inch

 from the wall, then locate the keyhole slot over the screw head

 and slide the Weather Forecast Station down to make it secure.

WEATHER FORECAST STATIONWALL

70°

Using the Stand

•To place your Weather Forecast Station on a flat 

 surface, pull down the built in stand away from 

 the back of the Weather Forecast Station.

M ON T H D A T E T E M P

W E A T H E R S T A T I O N

D I G I T A L C L O C K

MIN

12/24HR

HR TIME SET

LOCK

RESET RE-SYNC

MIN 12/24HR

HR TIME SET

LOCK

RESET RE-SYNC

2 3 4

Size: 210mm(W) x 297mm(H) Model D038

Clock Setting

• At the back of the Weather Forecast Station, slide switch to TIME SET and the time will keep flashing on the display. 

 Then press HR or MIN button to set your desired time and slide switch to the LOCK position to complete the time set 

 function.

Calendar Setting

• At the back of the Weather Forecast Station, slide switch to CALENDAR and the time will keep flashing on the display. 

 Then press MONTH, DATE or YEAR button to set your desired calendar settings and slide switch to the LOCK position 

 to complete the calendar set function.

 Notes: Incorrect calendar settings will be automatically adjusted, i.e. February 30 will be adjusted to February 1, April 31 

 will be adjusted to April 1.

Check Weather Forecast

• The Weather Forecast Station is displayed in the weather forecast reading. There are five readings for the forecast: 

 sunny, sunny & cloudy, cloudy, rainy and stormy.

• When the weather tendency is indicated up, it means the weather is going better. If the weather tendency is indicated 

 down, the weather is going bad. While the weather tendency is indicated still, the weather remains unchanged under 

 atmosphere pressure.

Notes: Upon turning on the power of the Weather Forecast Station, the weather data can be obtained after about 24

hours. It can forecast the weather for next 6 hours. Do not move the Weather Forecast Station while in operation;

otherwise, the result will not be reliable.

Check indoor temperature

• The weather Forecast Station is displayed indoor current temperature reading.

12HR / 24HR international time display

• Press the 12HR/24HR button to choose the desired display format.

• "AM" or "PM" will be displayed only in the 12HR format.

Centigrade (°C) or Fahrenheit (°F) selection

• Slide the °C/°F switch to choose the Centigrade or Fahrenheit readout.

Reset the Weather Forecast Station

• Press the RESET button when the Weather Forecast Station does not operate normally.

Notes: Once resetting the Weather Forecast Station, the reliable weather data can be obtained after about 24 hours.

Take care of your weather forecast station

• Avoid exposing your weather forecast station to extreme temperatures, water or severe shock.

• Do not put your weather forecast station in conditions of excessive force, shock, dust, extreme temperature or humidity. 

 Any of these conditions may shorten the life of the clock.

• Do not tamper with any of the internal component of the weather forecast station. This will invalidate the warranty under 

 the above condition.

• Use only fresh batteries. Mixing old and new batteries may cause battery leakage.

D038

Q&Q D038 User manual

Q&Q D038 User manual

Other documents