abc Sun Control SunSolutions Deluxe User manual

Brand: abc Sun Control

Model: SunSolutions Deluxe

Type: User manual

DELUXE SOFFIT BRACKET

3.9”

5.685”

DELUXE WALL BRACKET

6”

2.375”

SunSolutions Deluxe

Crank Operated Folding Arm Awning System

The abc Deluxe lateral arm retractable awning is based on the enhanced system developed in Sweden by EGE Westin AB. This system

incorporates the latest advancements including a variable pitch adjustment for the arms and an energy absorbing shoulder. abc

imports the critical components of this system from EGE Sweden, and assembles them at our North Hollywood factory to produce

one of the most reliable time proven lateral arm awning systems available today.

Hardware is available in White, Sand and Bronze colors.

Standard operation is by smooth German Geiger bevel gears and crank, or by optional Somfy 500 or 600 series motors depending of

the size of the unit. Motors can be operated by switch or remote control, or integrated into other automated controls.

Arms are constructed utilizing double tensioned springs connected to the forearm with stainless steel chain.

The torsion bar, front bar, roller tube, wall and hood brackets and arm pro les are all manufactured with powder coated extruded

high quality aluminum.

Options include: Heavy gauge extruded aluminum hood and retractable valance.

AWNING>OPEN ROLLER>FOLDING ARM

5/8” PITCH ADJUSTMENT

DELUXE HOOD

BRACKET

1.3”

PRODUCT SPECIFICATIONS

Linear Width

Projection

Frame Finish

Frame Colors

Mounting Options

Roller Tube

Torsion Bar

Pitch Adjustment

Fabric Protection

Unit Operation

Retractable Valance

Fabric Options

Valance Options

5’1” – 40’

4’1”, 5’9”, 6’10”, 8’6”, 10’2”, 12’

Polyester Powder Coated

White Sand Bronze

Wall, So

t, Roof

78 mm

35 mm

0º – 45º

Optional Hood with Side Covers

Manual Geiger Bevel Gear or Somfy Motor

Manual or Motorized- 4’ Drop

100% Solution Dyed Acrylics

9 standard choices or dealer custom design

WALL FIX REQUIRED SPACE

5/8” PITCH ADJUSTMENT

Screen

Material

3-1/4"

1-1/2"

6-3/4"

9-3/4"

2-1/2"

WALL

Valance Styles

Pitch

All lateral arm awnings sold by abc Sun Control, LLC have a convenient pitch adjustment feature which allows the owner to easily adjust the pitch (degree of incline of the fabric relative to the vertical

surface that the awning is attached to). When adjusting the pitch it is recommended that the awning is half way or less extended and that the arm is supported with upward pressure to reduce the pressure

on the adjustment mechanism. The pitch adjustment is located in the shoulder (the part that connects the arm to the torsion bar) of the arm and can be adjusted with a wrench or socket.

The pitch of the awning can be adjusted during the year to provide maximum shading e

ect as the sun travels with the seasons. We recommend always maintaining a minimum 20 degree pitch to allow

the awning to shed water. This should be taken into account when positioning the awning on the mounting surface as this will a

ect the position of the front bar relative to the ground. The chart below

demonstrates the impact of pitch on the projection of the awning and drop of the front bar.

PITCH VS. PROJECTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

10%

10º

20º

30º

40º

45º

20%

30%

40%

DROP

PROJECTION

% PITCH

DEGREE

PITCH

Safety Precaution

Motors

Retracting and extending the sun control system several times in quick succession may activate the thermal cutout switch that prevents the motor from overheating. After it has cooled down, the motor will reactivate itself again.

Gears

Do not apply excess force when turning crank in order to avoid damage to gear or eyelet.

Electrical

Only individuals quali ed and licensed should perform the electrical installation on behalf of the customer. All circuits should be properly grounded and a drip loop is required to be formed in the motor cable to prevent water

intrusion into the head of the motor.

Lateral Arms

Lateral arms are under signi cant spring tension and can be dangerous if not handled properly. Never attempt to take an awning apart to service or replace the fabric without rst securing the arms to prevent them from opening

violently.

Do Not allow standing water to accumulate on your awning. Use a soft broom and gently push upwards from underneath the awning to push the pool of water o . Water accumulation may cause the fabric to stretch and may add

extra weight causing the metals bars and arms to bend or break under the load. If you live in an area that experiences frequent rainfall, ask your dealer about changing the pitch of your awning when installing.

Do Not operate your awning in freezing weather. If the unit is frozen, wait until it thaws out naturally before retracting. Your awning is not designed to carry the weight of snow when extended. Keep the awning retracted when

snow or freezing rain is anticipated.

Do Not expose the system to direct ames and hot temperatures. Grease and smoke may coat and discolor the fabric. If your awning has not been used for a long while and especially if the weather has been cold, moving parts

and springs may creak. A silicone spray lubricant carefully applied to moving parts will help eliminate some of the noise quickly. As the awning "breaks in" the fabric may stretch somewhat requiring that the limits be reset so as

to maintain the proper tension on the fabric.

Do Not leave shrubbery vines and tree branches on the awning. Plants can contain an acid that may be harmful to your fabric. During operation of the awning, be aware of your surroundings and potential obstructions.

Do Not spray insect repellant on the fabric. Some solutions may impair the water repellency of the fabric and cause staining.

Do Not wash the fabric with harsh or strong solutions such as bleach. Avoid scrubbing with abrasive cleaners.

Do Not force or pull on your awnings when adjusting pitch or during normal operations.

Do Not allow foreign materials, leaves, twigs, dirt, or other articles to remain on the awning.

Do Not attach lights or ower pots to the awning frames.

Care & Cleaning

Maintenance

abc Sun Control manufactures awnings and screens from the highest quality materials. Taking a few simple steps can add to the life and appearance of your product.

Should your awning require deep cleaning and/or re-treatment, an authorized dealer will be able to recommend a certi

ed awning care specialist.

Instructions for Cleaning

Always keep your awning and screens clean. The normal awning fabric we use is mildew resistant, however, if dirt or other foreign materials are left to accumulate on the fabric, mildew damage to the material is possible.

soapy solution. The manufacturers of the fabric recommend light cleaners that are diluted in water such as Ivory Flakes or Woolite. After cleaning, careful and thorough rinsing should be done and the awning left out to dry in

normal warm weather conditions.

Clean the underside of awnings by gently brushing with a soft brush/broom.

Any time anything more than a gentle scrubbing is required, you may be removing the waterproof coating on the fabric. Dirt and mildew will begin adhering to that spot. To prevent this, apply a spray of water-repellent coating

such as 303 Hightech Fabric Guard after it has been cleaned. Spray cans of this waterproo

ng solution are available at most hardware store.

On clear vinyl material, ush thoroughly with water to rinse away environmental abrasives. Wash with a mild soap solution or Imar Cleaners and Protectant. Do not use Simple Green or Pine Sol or any other harsh cleaner as they

will dull the surface. Apply the soap solution with a clean soft cloth followed by a thorough rinse with water. Allow vinyl to dry completely prior to rolling the fabric up. This process should be done monthly. A clear vinyl

conditioner/polish can be applied to the surface to extend the life and transparency of the material. These conditioning products can be purchased from marine stores.

Limited Warranty

abc Sun Control, LLC warrants that all products are made from the nest materials available and will be free of defects and shall will carry with them the following warranty. This warranty covers

only materials and speci

cally excludes the cost of removal of the defective item and installation of the replacement.

The warranty provided is as follows:

abc Sun Control

defective items is nal. abc Sun Control

result from falling debris.

substitute or replacement product or component in the event that a product or component of a product is discontinued or otherwise not available.

abc Sun Control reserves the right to furnish a substitute or replacement product or component in the event that a product or component of a product has been discontinued or no longer available.

abc Sun Control

owners.

supersedes the warranty described above.

abc Sun Control