Action Sports Equipment Pty Ltd. Netball Stand Set Assemble, Instruction Manual

Brand
Action Sports Equipment Pty Ltd.
Model
Netball Stand Set
Type
Assemble, Instruction Manual
Netball Stand Limited Warranty
ACTION SPORTS warrants its Netball Stand products to be free from defects in material
and workmanship under normal use and service conditions.
The various components of the Netball Stand are warranted against defects and
workmanship for 6 months.
Our sales and service centre has been set up to provide assembly assistance, replacement
parts and accessories, and to efficiently handle all warrant y related matters.
Standard Call + 64 9 477 6020 or email [email protected] (New Zealand)
Opening hours: 9am – 5pm Monday –Friday (excluding public holidays)
www.actionsports.com.au
ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au
Page 3
Netball Stand Set
Assemble Instruction Manual
All warranty coverage extends from the date of purchase. ACTION SPORTS’ obligation
under this Warranty is limited to replacing or repairing, at ACTION’s option, the product
or parts therein. Any enquiries relating to warranties or spare parts must be directed to our
Standard call +64 9 477 6020 (New Zealand). For efficient processing of your enquiry
please have relevant date of purchase, retailer name you purchased the item from and the
brand on the product. This warranty does not extend to any damage to a product caused by
abuse, improper or abnormal usage (as detailed in this instruction manual), or repairs not
provided by ACTION. Nor does this warranty extend to products used for commercial or
rental purposes. This warranty does not cover ordinary wear, tearand weathering, failure to
follow directions, improper installation, improper maintenance or acts of God (such as
damage caused by storms, lightning and by snow or ice). No other Warranty beyond that
specifically set forth above is authorised by ACTION.
CONTENTS:
1. RING X 1PC
2. NET X 1PC
3. TOP POLE X 1PC
4. MIDDLE POLE X 1PC
5. LOWER POLE X 1PC
6. AXLE X 1PC
7. WHEEL X 2PCS
8. LOWER LEFT BRACE X 1PC
9. LOWER RIGHT BRACE X 1PC
10. M6 X 25MM BOLT X 2 WASHERS AND NUT SET X 4PCS
11. M6 X 16MM BOLT X 2 WASHERS AND NUT SET X 4PCS
12. M8 X 70MM BOLT X 1PC WASHER AND NUT SET X 1PC
13. M8 X 37MM SCREW X 2PCS
14. MOLDED BASE X 1PC
15. MOLDED BASE CAP X 1PC
16. TOOL SET X 2PCS
17. TOOL SET X 2PCS
1
1
2
2
2
3
5
4
6
7
8
9
10 11
12
13
14
15
16
17
10
1. FASTEN THE NET TO THE GOAL BY HANGING IT ON THE METALLIC
HOOKS AROUND THE RING AS CHART #1 .
2. ASSEMBLE THE RING WITH TOP POLE CAP USING SCREW (#10) AS
CHART #2 .
CHART #1
CHART #2
1. PLEASE DO NOT HANG OFF THE NETBALL RING.
2. PLEASE DO NOT HANG OBJECTS OF THE RING.
3. PLEASE CHECK THE PRODUCT BEFORE EACH USE.
4. THE STRUCTURE MUST BE ADJUSTED AND TRANSPO-RTED
BY AN ADULT.
5. DURING WINDY CONDITIONS PLEASE MOVE THE UNIT TO A
SHELTERED AREA.
6. IF THE PRODUCT IS FOUND TO BE DAMAGED, PLEASE CEASE
USING THE PRODUCT IMMEDIATELY.
7. THIS PRODUCT IS NOT DESIGNED FOR SLAM DUNKS OR
HANGING FROM THE RING. THIS MAY RESULT IN DEATH OR
INJURY. IT MAY ALSO DAMAGE THE UNIT.
8. THE OWNER OF THIS EQUIPMENT IS RESPONSIBLE FOR
ENSURING THAT ALL INDIVIDUALS FOLLOW SAFETY
INSTRUCTIONS TO AVOID INJURIES OR DAMAGE TO
PROPERTY.
1
CAUTION:
1. CHECK ALL CONTENTS ARE INCLUDED BEFORE ASSEMBLY.
2. ALWAYS ASSEMBLE AND DISASSEMBLE THE PRODUCT UNDER ADULT SUPERVISION.
3. ANY BREAKAGE FOUND ON THE PRODUCT, PLEASE STOP ASSEMBLING OR DISASSEMBLING IT.
3
Netball Stand Set
Assemble Instruction Manual
Page 1
CHART #6
CHART #8
CHART #3
CHART #5
CHART #4
WATER OR SAND
4
3
CHART #7
5
4
6
15
14
13
7
11
12
98
3. INSERT THE TOP POLE WITH THE NETBALL RING INTO
THE MIDDLE POLE AND AFFIX WITH SCREW #13 AS PER
CHART 3.
4. AS PER CHART 4 SECURE THE WHEELS AND THE LOWER
POLE BY INSERTING THE AXLE THROUGH THE BASE AND
THE MIDDLE POLE.
5. ASSEMBLE AND FASTEN LOWER RIGHT AND LEFT
BRACES ON MOLDED BASE WITH SCREW (#11) AS
CHART #5 .
6. USING SCREW #12 FASTEN THE LEFT AND RIGHT BRACES
TO THE LOWER POLE AS PER CHART 6.
7. SLIDE THE MIDDLE POLE INTO THE LOWER POLE AND
SECURE USING THE DOWEL. THIS CAN BE ADJUSTED TO
ADJUST THE HEIGHT.
8. FILL UP THE BASE WITH WATER OR SAND AND INSERT
THE BASE CAP AS PER CHART 8.
Netball Stand Set
Assemble Instruction Manual
Page 2
  • Page 1 1
  • Page 2 2
  • Page 3 3

Action Sports Equipment Pty Ltd. Netball Stand Set Assemble, Instruction Manual

Brand
Action Sports Equipment Pty Ltd.
Model
Netball Stand Set
Type
Assemble, Instruction Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents