Feiss WB1872ANBZ Installation guide

Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Secure the mounting plate to the junction box.
Install the candle tube by sliding it over the socket.
Install the candle follower by placing it on top of the candle tube.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the shade by placing it over the lamp and onto the shade base.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
1
2
3
4
5
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Quinn Wall
1.0
WB1872
WB1872
Wall
1A
JUNCTION BOX
MOUNTING
PLATE
7
8
FIXTURE SCREW
4
6
7
LAMP
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
8
9
CANDLE TUBE
SHADE
SOCKET
CANDLE FOLLOWER
SHADE BASE
3
2
9
5
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss WB1872ANBZ Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI