MARK-10 Series SSM Force Sensor User guide

MARK-10
Brand
MARK-10
Model
Series SSM Force Sensor
Type
User guide

MARK-10 Series SSM Force Sensor gives you tension and compression force measurement capabilities. Paired with a compatible BGI force/torque indicator, this sensor delivers real-time, average, and peak readings. Here are a few use cases where this tool could be helpful:

  1. Monitoring tension in cables, wires, or ropes
  2. Measuring the force required to open or close a door or window
  3. Testing the strength of materials by applying a controlled force
  4. Calibrating other force-measuring devices
  5. Measuring the force applied during a physical therapy session

The SSM sensor comes ready to use and is easily interchangeable with other SSM series sensors. It features a durable construction and is designed to withstand repetitive shock and impact loading.

MARK-10 Series SSM Force Sensor gives you tension and compression force measurement capabilities. Paired with a compatible BGI force/torque indicator, this sensor delivers real-time, average, and peak readings. Here are a few use cases where this tool could be helpful:

  1. Monitoring tension in cables, wires, or ropes
  2. Measuring the force required to open or close a door or window
  3. Testing the strength of materials by applying a controlled force
  4. Calibrating other force-measuring devices
  5. Measuring the force applied during a physical therapy session

The SSM sensor comes ready to use and is easily interchangeable with other SSM series sensors. It features a durable construction and is designed to withstand repetitive shock and impact loading.

Reference Guide
Series SSM
INLINE TENSION/COMPRESSION
FORCE SENSORS
2
GENERAL
Carefully remove the sensor from its packaging and inspect for any damage.
The sensor is shipped ready to use. No assembly is required.
Series SSM force sensors work in conjunction with the BGI force/torque
indicator for instantaneous, average, and peak torque measurements. Simply
plug the 9-pin connector into the external sensor connector on the indicator.
Please note that all calibration data and menu selections programmed and
saved during setup with the BGI are saved within the sensor. While this allows
for interchangeability, each sensor must be programmed separately.
In order to extend the life of your unit, avoid repetitive shock and impact
loading.
DIMENSIONS
in [mm]
Series SSM
10.0 [254] RETRACTED LENGTH
#10-32 X2
0.16 [4.1]
2.5 [63.5]
0.31 [7.9]
Ø 0.44 [11.2]
2.06 [52.3]
1.83 [46.5]
0.396 [10.06]
3
Mark-10 Corporation expressly warrants to its buyer for three (3) years from the date of
delivery that the goods sold are free from defects in workmanship and materials. Mark-10
Corporation will, at its option, repair or replace or refund the purchase price of goods
found to be defective. This remedy shall be the buyer’s sole and exclusive remedy. Any
modification, abuse, exposure to corrosive environment or use other than intended will
void this warranty. This warranty is in lieu of all other warranties, including implied warran-
ties of merchantability and fitness for an intended purpose. In no event shall Mark-10
Corporation be liable for any incidental and consequential damages in connection with
goods sold or any part thereof.
WARRANTY
SPECIFICATIONS
Accuracy: ±0.15% FS + BGI
Operating conditions:
Temperature: 40ºF - 110ºF [5ºC - 45ºC]
Humidity: 96% max. (no condensation)
Reference Guide
Model
Capacity x Resolution
Safe Overload
% of Capacity
SSM025 0.25 x 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N
200
SSM05 0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N
SSM2 2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N
SSM10 10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N
SSM20 20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N
SSM50 50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N
SSM100 100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N
150
We make a measurable difference in force and torque measurement
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
Internet: www.mark-10.com
E-mail: [email protected]
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items, includ-
ing force gauges, torque gauges, force and torque test stands, sensors, grips,
software, and more.
32-1027
REV 3 0710
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

MARK-10 Series SSM Force Sensor User guide

MARK-10
Brand
MARK-10
Model
Series SSM Force Sensor
Type
User guide

MARK-10 Series SSM Force Sensor gives you tension and compression force measurement capabilities. Paired with a compatible BGI force/torque indicator, this sensor delivers real-time, average, and peak readings. Here are a few use cases where this tool could be helpful:

  1. Monitoring tension in cables, wires, or ropes
  2. Measuring the force required to open or close a door or window
  3. Testing the strength of materials by applying a controlled force
  4. Calibrating other force-measuring devices
  5. Measuring the force applied during a physical therapy session

The SSM sensor comes ready to use and is easily interchangeable with other SSM series sensors. It features a durable construction and is designed to withstand repetitive shock and impact loading.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents