KINGJOY Professional Camera Monopod Kit, 69 inch Aluminum Video Monopods User manual

Type
User manual
1
4
2
3
5
Foot Pad
Supporting Leg
"PUSH"square button
Aluminum Tube
Ball Cover Knob
Hand Strap
Quick Release Safety Buckle
Side Cover Knob
Quick-Release Plate
Locking Knob
Ball
Flip Lock
Anti-skidding
Leg Warmer
V Handgrip
Side Cover
Quick-Release Plate
1. Illustration 1 Monopod Introduction
2. Illustration 2:
Mount The Head Onto The Monopod
Equip the switching screw UNC1/4" & UNC3/8" to the
loading plate on the monopod and lock the loading plate by
rotating the screws clockwise with allen wrench then mount
the head onto monopod.
3. Illustration 3:Leg Length Adjustment
Turn the flip lock to loose the tube, then adjust it at desired
height. On the contrary to lock it.
4. Illustration 4: Adjustable Shooting Angle
The maximum shooting angle is 18 degree and could rotate
360 degree in this range.
5. Illustration 5: Fold Supporting Leg Up
Press the square buttonPUSHon the supporting leg to fold
them up. You could step on to the button to fold up it for
convenience.
Warnings:
Do not exceed the tripod's maximum load capacity.
Ensure the ballhead is locked.
Do not operate this tripod when the temperature is
below -20°C or above 70°C. It is not commended to
operate in saltwater.
Do not put this tripod in sunlight or lean it against the
glass of car for a long time.
Do not leave this tripod unattended in public place;
please be careful when use it in dangerous place.
Remove the camera from the ballhead during setup or
transport.
It is not necessary to equip lubricant. Please use
standard lubricant or grease when necessary.
For your safety, keep it out of power supply.
Reserve This Instruction Sheet For Future Reference.
  • Page 1 1

KINGJOY Professional Camera Monopod Kit, 69 inch Aluminum Video Monopods User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI