Asus Motherboard P5VD2-MX User manual

Motherboard

P5VD2-MX SE

User Guide

ii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any

form or by any means, except documentation kept by the purchaser for backup purposes,

without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or

altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME

WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY

ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identication or

explanation and to the owners’ benet, without intent to infringe.

E2977

First Edition

January 2007

iii

Contents

Notices ............................................................................................ vi

Safety information .......................................................................... vii

P5VD2-MX SE specications summary .........................................viii

Chapter 1: Product Introduction

1.1 Welcome! .............................................................................1-2

1.2 Package contents ................................................................1-2

1.3 Special features ...................................................................1-2

1.3.1 Product highlights ....................................................1-2

1.3.2 ASUS unique features .............................................1-4

1.4 Before you proceed .............................................................1-5

1.5 Motherboard overview .........................................................1-6

1.5.1 Motherboard layout .................................................1-6

1.5.2 Placement direction .................................................1-7

1.5.3 Screw holes .............................................................1-7

1.6 Central Processing Unit (CPU) ............................................1-8

1.6.1 Overview .................................................................1-8

1.6.2 Installing the CPU....................................................1-8

1.7 System memory .................................................................1-10

1.7.1 Overview ...............................................................1-10

1.7.2 Memory congurations ..........................................1-10

1.7.3 Installing a DIMM ...................................................1-13

1.7.4 Removing a DIMM .................................................1-13

1.8 Expansion slots ..................................................................1-14

1.8.1 Installing an expansion card ..................................1-14

1.8.2 Conguring an expansion card..............................1-14

1.8.3 PCI slots ................................................................1-16

1.8.4 PCI Express x 1 slot ..............................................1-16

1.8.5 PCI Express x 16 slot ............................................1-16

1.9 Jumpers .............................................................................1-17

1.10 Connectors ........................................................................1-19

1.10.1 Rear panel connectors ..........................................1-19

1.10.2 Internal connectors ................................................1-20

iv

Contents

Chapter 2: BIOS Information

2.1 Managing and updating your BIOS ......................................2-2

2.1.1 Creating a bootable oppy disk ...............................2-2

2.1.2 Using AFUDOS to copy the current BIOS ...............2-2

2.1.3 Using AFUDOS to update the BIOS ........................2-3

2.1.4 Recovering the BIOS with CrashFree BIOS 2.........2-5

2.1.5 Using ASUS EZ Flash to update the BIOS..............2-7

2.2 BIOS Setup program ...........................................................2-8

2.2.1 BIOS menu screen ..................................................2-9

2.2.2 Menu bar .................................................................2-9

2.2.3 Navigation keys .......................................................2-9

2.2.4 Menu items ............................................................2-10

2.2.5 Sub-menu items ....................................................2-10

2.2.6 Conguration elds................................................2-10

2.2.7 Pop-up window ......................................................2-10

2.2.8 Scroll bar ...............................................................2-10

2.2.9 General help ..........................................................2-10

2.3 Main menu .........................................................................2-11

2.3.1 System Time .........................................................2-11

2.3.2 System Date ......................................................... 2-11

2.3.3 Legacy Diskette A/B ..............................................2-11

2.3.4 Primary, Secondary, Third, Fourth IDE Master/Slave ...2-12

2.3.5 IDE Conguration ..................................................2-13

2.3.6 System Information ...............................................2-14

2.4 Advanced menu .................................................................2-15

2.4.1 CPU Conguration ................................................2-15

2.4.2 Chipset ..................................................................2-16

2.4.3 Onboard Devices Conguration ............................2-23

2.4.4 PCI PnP .................................................................2-24

2.5 Power menu .......................................................................2-25

2.5.1 ACPI 2.0 Support ..................................................2-25

2.5.2 ACPI APIC Support ...............................................2-25

2.5.3 APM Conguration ................................................2-26

2.5.4 Hardware Monitor ..................................................2-28

2.6 Boot menu .........................................................................2-29

2.6.1 Boot Device Priority ...............................................2-30

2.6.2 Boot Settings Conguration...................................2-31

2.6.3 Security .................................................................2-32

2.7 Exit menu ...........................................................................2-33

v

Contents

Chapter 3: Software Support

3.1 Installing an operating system .............................................3-2

3.2 Support CD information .......................................................3-2

3.2.1 Running the support CD ..........................................3-2

3.2.2 Drivers menu ...........................................................3-3

3.2.3 Utilities menu ...........................................................3-3

3.2.4 Make disk menu ......................................................3-5

3.2.5 Manuals menu .........................................................3-5

3.2.6 ASUS contact information .......................................3-6

vi

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

To assure compliance with FCC regulations, use shielded cables to

connect the monitor to the graphics card. Changes to this unit not

expressly approved by the party responsible for compliance can void

the user’s authority to operate this equipment.

vii

Safety Information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal

cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

• Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension

cord. These devices can interrupt the grounding circuit.

• Set your power supply to the correct voltage in your area. If you are

not sure about the voltage of the electrical outlet you are using, contact

your local power company.

• If the power supply is broken, do not try to x it by yourself. Contact a

qualied service technician or your retailer.

Operational safety

• Before installing the motherboard and adding devices on it, carefully

read all the manuals that came with the package.

• Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away

from connectors, slots, sockets, and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it can get wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a

qualied service technician or your retailer.

The symbol of the crossed out wheeled bin indicates that the product (electrical

and electronic equipment) should not be placed in municipal waste. Check local

regulations for disposal of electronic products.

viii

LGA775 socket for Intel® Core™2 Extreme / Core™2 Duo /

Pentium® D / Pentium® 4 / Celeron® D Processors

Compatible with Intel® 06/05B/05A processors

Supports Enhanced Intel SpeedStep® Technology (EIST),

and Intel® Hyper-Threading Technology

Northbridge: VIA P4M890

Southbridge: VIA VT8237A

1066/800/533 MHz

2 x 240-pin DDR2 DIMM sockets for up to 2 GB unbuffered

DDR2 533 DRAM memory

1 x PCI Express x16 slot for discrete graphics card

1 x PCI Express x1

2 x PCI slots

VIA VT8237A SouthBridge supports:

- 2 x Ultra DMA 133/100/66/33 for four IDE devices

- 2 x Serial ATA with RAID 0, RAID 1, and JBOD

congurations

Realtek® ALC660 6-channel CODEC

Realtek® RTL8201CL 10/100M LAN PHY

Supports up to 8 USB 2.0 ports

1 x Parallel port

1 x Serial port

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x VGA port

1 x Audio I/O port

1 x LAN (RJ-45) port

4 x USB 2.0 ports

2 x USB connectors support four additional USB ports

1 x 24-pin ATX power connector

1 x 4-pin ATX 12V power connector

1 x CD audio in connector

1 x Speaker out connector

1 x Front panel audio connector

CPU/Chassis fan connectors

1 x System panel connector

P5VD2-MX SE Specications Summary

CPU

Chipset

System bus

Memory

Expansion slots

Storage

Audio

LAN

USB 2.0

Rear panel I/O ports

Internal I/O connectors

(Continued on the next page)

ix

P5VD2-MX SE Specications Summary

*Specications are subject to change without notice.

BIOS features

ASUS special features

Manageability

Support CD

Form factor

4Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, ACPI

2.0, SM BIOS 2.3, ASUS EZ Flash, ASUS MyLogo

ASUS MyLogo

ASUS EZ Flash

ASUS CrashFree BIOS 2

WOR by PME, WOL by PME, WOR by Ring

Device drivers

ASUS PC Probe II

ASUS Update

MicroATX 9.6” x 7.2”VCT (24.5cm x 19.2cm)

x

Chapter 1

This chapter describes the features of this

motherboard. It includes brief explanations of

the special attributes of the motherboard and the

new technology it supports.

Product Introduction

1-2 Chapter 1: Product Introduction

1.3 Special Features

1.3.1 Product highlights

Intel® Core™2 Processor Ready

This motherboard supports the latest Intel® Core™2 processor in the LGA775

package. With the new Intel® Core™ microarchitecture technology and 1066 /

800 MHz FSB, Intel® Core™2 processor is one of the most powerful and energy

efcient CPU in the world.

Intel® Dual/Single-Core 65nm Processors

This motherboard supports Intel® 65nm Pentium® D / Intel® Pentium® 4 / Celeron®

processors. ASUS motherboard is the ideal solution to enhance the performance of

new generation processors.

1.1 Welcome!

Thank you for buying the ASUS® P5VD2-MX SE motherboard!

The ASUS P5VD2-MX SE motherboard delivers a host of new features and latest

technologies making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the

items in your package with the list below.

1.2 Package Contents

Check your P5VD2-MX SE package for the following items.

ASUS P5VD2-MX SE motherboard

ASUS motherboard support CD

1 x Ultra DMA 133/100/66 cable

1 x Serial ATA cable kit (SATA/Power)

1 x FDD cable

I/O shield

P5VD2-MX SE user guide

If any of the above items is damaged or missing, contact your retailer.

ASUS P5VD2-MX SE Motherboard 1-3

VT8237A chipset

The VT8237A Southbridge employs the VIA DriveStation™ Controller Suite that

enables multiple drive conguration through native Serial ATA, RAID, and Parallel

ATA/133 support. This chip also supports USB 2.0, MC97, PCI and LPC interfaces

and allows 6-channel audio through the VIA Vinyl Audio technology. When Serial

ATA installing OS, there is no need to set up drive.

DDR2 memory support

The motherboard supports DDR2 memory which features data transfer rates of

533 MHz to meet the higher bandwidth requirements of the latest 3D graphics,

multimedia, and Internet applications. With initial speeds from 400 and 533 MHz,

DDR2 memory provides bandwidth up to 4.3 GB/s. See pages 1-15 to 1-18 for

details.

PCI Express™ interface

The motherboard fully supports PCI Express, the latest I/O interconnect

technology that speeds up the PCI bus. PCI Express features point-to-point serial

interconnections between devices and allows higher clockspeeds by carrying data

in packets. This high speed interface is software compatible with existing PCI

specications. See page 1-22 for details.

Integrated 10/100 Mbps LAN

The on-board LAN controller is a highly integrated FAST Ethernet controller.

It is enhanced with an ACPI management function to provide efficient power

management for advanced operating systems.

USB 2.0 technology

USB 2.0 is the latest connectiviity standard for next generation components and

peripherals.Backwards compatible with current USB 1.1 peripherals, USB 2.0

delivers transfer speeds up to 40 times faster at 480MB/s, for easy connectivity.

Serial ATA RAID

The on board VT8237A southbridge provides the complete solution for your RAID

requirements on different disk array standards, and supports RAID 0, RAID 1 and

JBOD congurations on two Serial ATA ports.

1-4 Chapter 1: Product Introduction

1.3.2 ASUS unique features

EZ Flash BIOS

With the ASUS EZ Flash, you can easily update the system BIOS even before

loading the operating system. No need to use a DOS-based utility or boot from a

oppy disk. See page 2-7.

CrashFree BIOS 2

Whenever BIOS gets corrupted, ASUS CrashFree BIOS2 allows users to

reboot the computer and perform an smart auto-recovery procedure through the

motherboard support CD. See page 2-5.

ASUS MyLogo™

This feature allows you to personalize and add style to your system with

customizable boot logos. See pages 2-31.

ASUS P5VD2-MX SE Motherboard 1-5

1.4 Before You Proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Use a grounded wrist strap or touch a safely grounded object or a metal

object, such as the power supply case, before handling components to

avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, and/or components.

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that

the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you

should shut down the system and unplug the power cable before removing or

plugging in any motherboard component.

P5VD2-MX SE Onboard LED

SB_PWR

ON

Standby

Power

OFF

Powered

Off

P5VD2-MX SE

1-6 Chapter 1: Product Introduction

1.5 Motherboard Overview

1.5.1 Motherboard layout

LGA775

VIA

P4M890

VIA

VT8237A

18.3cm(7.2in)

24.4cm(9.6in)

DDR2 DIMM1 (64 bit,240-pin module)

DDR2 DIMM

2

(64 bit,240-pin module)

PCIEX16

PCI1

PCI2

PCIEX1_1

4Mb

BIOS

AAFP

CD

ALC660

USB78

USB56

SATA1

SATA2

CR2032 3V

Lithium Cell

CMOS Power

CLRTC

SPEAKER

F_PANEL

SUPER I/O

REALTEK

SB_PWR

FLOPPY

EATXPWR

PRI_IDE CHA_FAN CPU_FAN

PS2_USB_PWR

ATX12V

SEC_IDE

PS/2KBMS

T: Mouse

B: Keyboard

LAN_USB34

COM1

PARALLEL PORT

VGA1

Below:Mic In

Center:Line Out

Top:Line In

USB12

P5VD2-MX SE

ASUS P5VD2-MX SE Motherboard 1-7

P5VD2-MX SE

Do not overtighten the screws! Doing so may damage the motherboard.

1.5.2 Placement direction

When installing the motherboard, make sure that you place it into the chassis in the

correct orientation. The edge with external ports goes to the rear part of the chassis

as indicated in the image below.

1.5.3 Screw holes

Place six (6) screws into the holes indicated by circles to secure the motherboard

to the chassis.

Place this side

towards

the rear of the

chassis

1-8 Chapter 1: Product Introduction

1.6.1 Installling the CPU

To install a CPU:

1. Locate the CPU socket on the motherboard.

1.6 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA775 socket designed for the

Intel® Core™2 Extreme / Core™2 Duo / Pentium® D / Pentium® 4 / Celeron® D Processors.

•

Your boxed Intel® Core™2 Extreme / Core™2 Duo / Pentium® D /

Pentium® 4 / Celeron® D Processors package should come with

installation instructions for the CPU, fan and heatsink assembly.

If the instructions in this section do not match the CPU

documentation, follow the latter.

• Upon purchase of the motherboard, make sure that the PnP cap

is on the socket and the socket pins are not bent. Contact your

retailer immediately if the PnP cap is missing, or if you see any

damage to the PnP cap/socket pins/motherboard components.

ASUS will shoulder the cost of repair only if the damage is shipment/

transit-related.

• Keep the cap after installing the motherboard. ASUS will process

Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA775 socket.

•

The product warranty does not cover damage to the socket pins

resulting from incorrect CPU installation/removal, or misplacement/

loss/incorrect removal of the PnP cap.

Before installing the CPU, make sure that the socket box is facing towards you

and the load lever is on your left.

P5VD2-MX SE CPU Socket 775

P5VD2-MX SE

ASUS P5VD2-MX SE Motherboard 1-9

3. Lift the load lever in the direction of

the arrow to a 135º angle.

4. Lift the load plate with your thumb

and forenger to a 100º angle (A),

then push the PnP cap from the load

plate window to remove (B).

To prevent damage to the socket pins, do not remove the PnP cap unless you

are installing a CPU.

5. Position the CPU over

the socket, making sure

that the gold triangle is

on the bottom-left corner

of the socket. The socket

alignment key should t into

the CPU notch.

2. Press the load lever with your thumb (A) and move it to the left (B) until it is

released from the retention tab.

Retention tab

Load lever

This side of the cam

box should face you.

PnP Cap

A

B

Load plate

A

B

Alignment key

Gold triangle mark

1-10 Chapter 1: Product Introduction

The CPU ts in only one correct orientation. DO NOT force the CPU into the

socket to prevent bending the connectors on the socket and damaging the CPU!

6. Close the load plate (A), then push

the load lever (B) until it snaps into

the retention tab.

A

B

The motherboard supports Intel® LGA775 processors with the Intel® Enhanced

Memory 64 Technology (EM64T), Enhanced Intel SpeedStep® Technology

(EIST), and Hyper-Threading Technology.

If you install a dual-core CPU, make sure to connect the chassis fan cable to

CHA_FAN connector for system stability.

Page is loading ...

Asus Motherboard P5VD2-MX User manual

This manual is also suitable for

Asus Motherboard P5VD2-MX User manual

Related papers

Other documents