SRS-X2

Sony SRS-X2, AK8BM1510 User manual

Hello! I am an AI chatbot trained to assist you with the Sony SRS-X2 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Installation manual

1. Mount parts on PCB (including main board & jack PCB)

Main board: top side



Main board: bottom side

For a module with print circuit board antenna, to eliminate the influence from other components or ground,

a clearance area around the print circuit board antenna is necessary, please refer to following picture. In

this area, there should be no metal in it. Besides x-y-axis, there should also be no metal at the Z-axis

direction.

Jack PCB





2.  Accordingtotheexplodedview(refertofinalpage)tomakeacompleteproduct.



2a:solderthespeakerwirerightly,theninstallthemainboardtothePCBholderwithscrews.

 



2b:Installthebatterypack/NFCmodule/jackPCBtocabinetrightly.













2c:Installthemainboardwithspeakers.

Thenconnectbatterypack/jackPCB/NFCmodule/microphone.







2d:Installthespeakerholderwithscrews,theninstallthespeakergrill.







2e:Stickthenameplateanddatecode/serialnumberonbott omside.







The END host which install this module should bear the label which display “ contains FCC ID:

AK8BM1510and contient IC : 409B‐BM1510"









/

Other documents