Asus P5GD1 User manual

Motherboard

P5GD1-VM

iiii

ii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the

serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS

OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E1881E1881

E1881

Revised Edition V2Revised Edition V2

Revised Edition V2

March 2005March 2005

March 2005

iiiiii

iii

Contents

Notices ................................................................................................ vi

Safety information ............................................................................. vii

P5GD1-VM specifications summary .................................................. viii

Chapter 1:Chapter 1:

Chapter 1: Product introductionProduct introduction

Product introductionProduct introduction

Product introduction

1.1 Welcome! .............................................................................. 1-2

1.2 Package contents ................................................................. 1-2

1.3 Special features .................................................................... 1-2

1.3.1 Product highlights................................................... 1-2

1.3.2 Innovative ASUS features ....................................... 1-4

1.4 Before you proceed .............................................................. 1-5

1.5 Motherboard overview .......................................................... 1-6

1.5.1 Motherboard layout ................................................ 1-6

1.5.2 Placement direction ................................................ 1-7

1.5.3 Screw holes ............................................................ 1-7

1.6 Central Processing Unit (CPU) .............................................. 1-8

1.6.1 Installing the CPU.................................................... 1-8

1.6.2 Installing the CPU heatsink and fan ...................... 1-11

1.6.3 Uninstalling the CPU heatsink and fan .................. 1-13

1.7 System memory ................................................................. 1-15

1.7.1 DIMM sockets location .......................................... 1-15

1.7.2 Memory Configurations ......................................... 1-15

1.7.3 Installing a DIMM ................................................... 1-17

1.7.4 Removing a DIMM ................................................. 1-17

1.8 Expansion slots ................................................................... 1-18

1.8.1 Installing an expansion card .................................. 1-18

1.8.2 Configuring an expansion card.............................. 1-18

1.8.3 PCI slots ................................................................ 1-20

1.8.5 PCI Express x16 slot ............................................. 1-20

1.8.4 PCI Express x1 slot ............................................... 1-20

1.9 Jumpers .............................................................................. 1-21

1.10 Connectors ......................................................................... 1-23

1.10.1 Rear panel connectors .......................................... 1-23

1.10.2 Internal connectors............................................... 1-25

iviv

iv

Contents

Chapter 2:Chapter 2:

Chapter 2: BIOS setupBIOS setup

BIOS setupBIOS setup

BIOS setup

2.1 Managing and updating your BIOS ........................................ 2-2

2.1.1 Creating a bootable floppy disk .............................. 2-2

2.1.2 AFUDOS utility ........................................................ 2-3

2.1.3 ASUS EZ Flash utility .............................................. 2-5

2.1.4 ASUS CrashFree BIOS 2 utility ................................ 2-7

2.1.5 ASUS Update utility ................................................ 2-9

2.2 BIOS setup program ........................................................... 2-12

2.2.1 BIOS menu screen ................................................. 2-13

2.2.2 Menu bar ............................................................... 2-13

2.2.3 Navigation keys .................................................... 2-13

2.2.4 Menu items ........................................................... 2-14

2.2.5 Sub-menu items ................................................... 2-14

2.2.6 Configuration fields .............................................. 2-14

2.2.7 Pop-up window ..................................................... 2-14

2.2.8 Scroll bar .............................................................. 2-14

2.2.9 General help .......................................................... 2-14

2.3 Main menu .......................................................................... 2-15

2.3.1 System Time ......................................................... 2-15

2.3.2 System Date ......................................................... 2-15

2.3.3 Legacy Diskette A ................................................ 2-15

2.3.4 Primary, Third, and Fourth IDE Master/Slave ........ 2-16

2.3.5 IDE Configuration .................................................. 2-17

2.3.6 System Information .............................................. 2-18

2.4 Advanced menu .................................................................. 2-19

2.4.1 USB Configuration................................................. 2-19

2.4.2 CPU Configuration ................................................. 2-20

2.4.3 Chipset ................................................................. 2-22

2.4.4 Onboard Devices Configuration ............................ 2-24

2.4.5 PCI PnP ................................................................. 2-25

vv

v

Contents

2.5 Power menu ........................................................................ 2-27

2.5.1 Suspend Mode ...................................................... 2-27

2.5.2 Repost Video on S3 Resume ................................ 2-27

2.5.3 ACPI 2.0 Support .................................................. 2-27

2.5.4 ACPI APIC Support ................................................ 2-27

2.5.5 APM Configuration ................................................ 2-28

2.5.6 Hardware Monitor ................................................. 2-29

2.6 Boot menu .......................................................................... 2-31

2.6.1 Boot Device Priority .............................................. 2-31

2.6.2 Boot Settings Configuration ................................. 2-32

2.6.3 Security ................................................................ 2-33

2.7 Exit menu ........................................................................... 2-35

Chapter 3:Chapter 3:

Chapter 3: Software supportSoftware support

Software supportSoftware support

Software support

3.1 Installing an operating system ............................................. 3-2

3.2 Support CD information ........................................................ 3-2

3.2.1 Running the support CD ......................................... 3-2

3.2.2 Drivers menu .......................................................... 3-3

3.2.3 Utilities menu .......................................................... 3-4

3.2.4 ASUS Contact information ...................................... 3-5

3.2.5 Other information ................................................... 3-6

Appendix:Appendix:

Appendix: CPU featuresCPU features

CPU featuresCPU features

CPU features

A.1 Intel

®

EM64T ........................................................................ A-2

A.2 Enhanced Intel SpeedStep® Technology (EIST) ................... A-2

A.2.1 System requirements ............................................. A-2

A.2.2 Using the EIST ........................................................ A-3

A.3 Intel

®

Hyper-Threading Technology ...................................... A-4

vivi

vi

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viivii

vii

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you are

using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

viiiviii

viii

LGA775 socket for Intel

®

Pentium

®

4/Celeron processor

Compatible with Intel

®

PCG 04A and 04B processors

Supports Intel

®

Hyper-Threading Technology

Supports Intel

®

Enhanced Memory 64 Technology (EM64T)

Supports Enhanced Intel SpeedStep

®

Technology (EIST)

Northbridge: Intel

®

915G Graphics Memory Controller

Hub (GMCH)

Southbridge: Intel

®

ICH6

800/533 MHz

Dual-channel memory architecture

4 x 184-pin DIMM sockets support unbufferred non-ECC

400/333 MHz DDR memory modules

Integrated Intel

®

Graphics Media Accelerator 900

1 x PCI Express x16 slot for discrete graphics card

1 x PCI Express x1 slot

2 x PCI slots

Intel

®

ICH6 Southbridge supports:

- 1 x Single-channel Ultra DMA 100/66/33

- 4 x Serial ATA

ITE

®

8211F IDE controller supports:

- 1 x Single-channel Ultra DMA 133/100

Realtek

®

ALC861 8-channel CODEC

S/PDIF out interface support

Intel

®

10/100 Fast Ethernet LAN controller

Supports up to 8 USB 2.0 ports

ASUS CrashFree BIOS 2

ASUS Q-Fan

ASUS EZ Flash

ASUS MyLogo

4 MB Flash ROM, AMI BIOS, PnP, DMI2.0, SM BIOS 2.3,

WfM2.0

2 x Serial ATA signal cables

1 x Ultra DMA 133/100/66 cable

1 x FDD cable

1 x I/O shield

P5GD1-VM specifications summary

(continued on the next page)

CPUCPU

CPU

ChipsetChipset

Chipset

Front Side BusFront Side Bus

Front Side Bus

MemoryMemory

Memory

GraphicsGraphics

Graphics

Expansion slotsExpansion slots

Expansion slots

StorageStorage

Storage

High DefinitionHigh Definition

High Definition

AudioAudio

Audio

LANLAN

LAN

USBUSB

USB

Special featuresSpecial features

Special features

BIOS featuresBIOS features

BIOS features

AccessoriesAccessories

Accessories

ixix

ix

1 x PS/2 mouse port

1 x Parallel port

1 x LAN (RJ-45) port

8-channel audio ports

4 x USB 2.0 ports

1 x VGA port

1 x Serial port

1 x PS/2 keyboard port

1 x Floppy disk drive connector

1 x Primary IDE connector

1 x PCI IDE connector

4 x Serial ATA connectors

1 x CPU fan connector

1 x Chassis fan connector

2 x USB 2.0 connectors

1 x 24-pin ATX power connector

1 x 4-pin ATX 12 V power connector

1 x Optical drive audio connector

1 x Front panel High Definition Audio connector

1 x Chassis intrusion connector

1 x Speaker Out connector

1 x Digital audio connector

1 x System panel connector

ATX power supply (with 24-pin and 4-pin 12 V plugs)

ATX 12 V 2.0 compliant

Micro ATX form factor: 9.6 in x 9.6 in (24.5 cm x 24.4 cm)

Device drivers

ASUS PC Probe

ASUS Live Update Utility

Anti-virus software (OEM version)

P5GD1-VM specifications summary

*Specifications are subject to change without notice.

Rear panelRear panel

Rear panel

InternalInternal

Internal

connectorsconnectors

connectors

PowerPower

Power

requirementrequirement

requirement

Form factorForm factor

Form factor

Support CDSupport CD

Support CD

contentscontents

contents

xx

x

1

Product

introduction

This chapter describes the motherboard

features and the new technologies

it supports.

1-21-2

1-2 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.3 Special features

1.3.11.3.1

1.3.1 Product highlightsProduct highlights

Product highlightsProduct highlights

Product highlights

Latest processor technology Latest processor technology

Latest processor technology

The motherboard comes with a 775-pin surface mount Land Grid Array

(LGA) socket designed for the Intel

®

Pentium

®

4 processor in the 775-land

package. The motherboard supports the Intel

®

Pentium

®

4 processor with

800 MHz Front Side Bus (FSB). The motherboard also supports the Intel

®

Hyper-Threading Technology and is fully compatible with Intel

®

04B and

04A processors. See page 1-8 for details.

IntelIntel

Intel

®®

®

EM64T EM64T

EM64T

The motherboard supports Intel

®

Pentium

®

4 CPUs with the Intel

®

EM64T

(Extended Memory 64 Technology). The Intel

®

EM64T feature allows your

computer to run on 64-bit operating systems and access larger amounts of

system memory for faster and more efficient computing. See the Appendix

for details.

1.1 Welcome!

Thank you for buying an ASUSThank you for buying an ASUS

Thank you for buying an ASUS

®®

®

P5GD1-VM motherboard! P5GD1-VM motherboard!

P5GD1-VM motherboard!

The motherboard delivers a host of new features and latest technologies,

making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it,

check the items in your package with the list below.

If any of the above items is damaged or missing, contact your retailer.

1.2 Package contents

Check your motherboard package for the following items.

MotherboardMotherboard

Motherboard ASUS P5GD1-VM motherboard

CablesCables

Cables 2 x Serial ATA signal cables

1 x Ultra DMA 133/100/66 cable

Floppy disk drive cable

AccessoriesAccessories

Accessories I/O shield

Application CDsApplication CDs

Application CDs ASUS motherboard support CD

DocumentationDocumentation

Documentation User guide

ASUS P5GD1-VMASUS P5GD1-VM

ASUS P5GD1-VM 1-31-3

1-31-3

1-3

Enhanced Intel SpeedStepEnhanced Intel SpeedStep

Enhanced Intel SpeedStep

®

Technology (EIST) Technology (EIST)

Technology (EIST)

The Enhanced Intel SpeedStep

®

Technology (EIST) intelligently manages the

CPU resources by automatically adjusting the CPU voltage and core frequency

depending on the CPU loading and system speed or power requirement.

See page 2-22 and the Appendix for details.

IntelIntel

Intel

®®

®

915G 915G

915G

The Intel

®

915G graphics memory controller hub (GMCH) and the ICH6 I/O

controller hub provide the vital interfaces for the motherboard. The GMCH

features the Intel

®

Graphics Media Accelerator 900, an integrated graphics

engine for enhanced 3D, 2D, and video capabilities. The GMCH provides the

interface for a processor in the 775-land package with 533/800 MHz front

side bus (FSB), dual channel DDR at speeds of up to 400 MHz, and PCI

Express x16 interface for a graphics card.

The Intel

®

ICH6 Southbridge represents the sixth generation I/O controller

hub that provides the interface for PCI Express and 8-channel high

definition audio.

Dual display technology support (optional)Dual display technology support (optional)

Dual display technology support (optional)

The integrated graphics engine supports dual display technology and TV

out function through the optional ASUS DVI-ADD2 card. You can show

additional independent display on an LCD monitor, or stretch one type of

content on both VGA and LCD monitors for more workspace. See page

1-20 for details.

Dual-channel DDR memory support Dual-channel DDR memory support

Dual-channel DDR memory support

Employing the Double Data Rate (DDR) memory technology, the

motherboard supports up to 4 GB of system memory using DDR 400/333

DIMMs. The ultra-fast 400 MHz memory bus delivers the required

bandwidth for the latest 3D graphics, multimedia, and Internet applications.

See page 1-14 for details.

PCI Express™ interface PCI Express™ interface

PCI Express™ interface

The motherboard fully supports PCI Express, the latest I/O interconnect

technology that speeds up the PCI bus. PCI Express features point-to-point

serial interconnections between devices and allows higher clockspeeds by

carrying data in packets. This high speed interface is software compatible

with existing PCI specifications. See page 1-20 for details.

Serial ATA technology Serial ATA technology

Serial ATA technology

The motherboard supports the Serial ATA technology through the Serial ATA

interfaces and the Intel

®

ICH6. The SATA specification allows for thinner,

more flexible cables with lower pin count, reduced voltage requirement, and

up to 150 MB/s data transfer rate. See page 1-27 for details.

1-41-4

1-4 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

8-channel high definition audio 8-channel high definition audio

8-channel high definition audio

Onboard is the Realtek

®

ALC861 7.1-channel audio CODEC. This CODEC is

fully-compliant with Intel

®

High Definition Audio standard (192 KHz, 24-bit

audio). With the CODEC, 8-channel audio ports, and S/PDIF interfaces, you

can connect your computer to home theater decoders to produce

crystal-clear digital audio. See page 1-24 for details.

S/PDIF digital sound ready S/PDIF digital sound ready

S/PDIF digital sound ready

The motherboard supports the S/PDIF Out function through the S/PDIF

interface at midboard. The S/PDIF technology turns your computer into a

high-end entertainment system with digital connectivity to powerful audio and

speaker systems. See page 1-33 for details.

USB 2.0 technology USB 2.0 technology

USB 2.0 technology

The motherboard implements the Universal Serial Bus (USB) 2.0

specification, dramatically increasing the connection speed from the

12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is

backward compatible with USB 1.1. See pages 1-24 and 1-29 for details.

1.3.21.3.2

1.3.2 Innovative ASUS featuresInnovative ASUS features

Innovative ASUS featuresInnovative ASUS features

Innovative ASUS features

CrashFree BIOS 2 CrashFree BIOS 2

CrashFree BIOS 2

This feature allows you to restore the original BIOS data from the support CD

in case when the BIOS codes and data are corrupted. This protection

eliminates the need to buy a replacement ROM chip. see page 2-7 for

details.

ASUS Q-Fan technology ASUS Q-Fan technology

ASUS Q-Fan technology

The ASUS Q-Fan technology smartly adjusts the fan speeds according to

the system loading to ensure quiet, cool, and efficient operation. See page

2-29 for details.

ASUS EZ Flash BIOS ASUS EZ Flash BIOS

ASUS EZ Flash BIOS

With the ASUS EZ Flash, you can easily update the system BIOS even

before loading the operating system. No need to use a DOS-based utility or

boot from a floppy disk. See page 2-5 for details.

ASUS MyLogo™ ASUS MyLogo™

ASUS MyLogo™

This feature allows you to personalize and add style to your system with

customizable boot logos. See page 2-32 for details.

ASUS P5GD1-VMASUS P5GD1-VM

ASUS P5GD1-VM 1-51-5

1-51-5

1-5

Onboard LEDOnboard LED

Onboard LED

The motherboard comes with a standby power LED that lights up to

indicate that the system is ON, in sleep mode, or in soft-off mode.

This is a reminder that you should shut down the system and unplug

the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard

LED.

1.4 Before you proceed

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or a

metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensure

that the ATX power supply is switched off or thethat the ATX power supply is switched off or the

that the ATX power supply is switched off or the

power cord is detached from the power supply. power cord is detached from the power supply.

power cord is detached from the power supply. Failure

to do so may cause severe damage to the motherboard, peripherals,

and/or components.

P5GD1-VM

®

P5GD1-VM Onboard LED

SB_PWR1

ON

Standby

Power

OFF

Powere

d

Off

1-61-6

1-6 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.5 Motherboard overview

1.5.11.5.1

1.5.1 Motherboard layoutMotherboard layout

Motherboard layoutMotherboard layout

Motherboard layout

3

2

21

Below:

Center/Subwoofer

Center:

Side Speaker Out

Top:Rear Speaker Out

+5V

(Default) +5VSB

USBPW56

USBPW78

(Default)

+5V +5VSB

KBPWR1

2312

CLRTC1

Normal Clear CMOS

(Default)

12 23

P5GD1-VM

CR2032 3V

Lithium Cell

CMOS Power

CD1

Super

I/O

Intel FWH

4Mb

ATX12V1

FLOPPY1

AAFP1

DDR DIMM_A1 (64 bit,240-pin module)

KBPWR1

SB_PWR1

USBPW34

USBPW12

F_PANEL1

CHASSIS1USB78

USB56

USBPW56

USBPW78

PRI_PCIIDE1

CLRTC1

SATA1

PCI1

Intel

915G

Intel

ICH6

DDR DIMM_A2 (64 bit,240-pin module)

DDR DIMM_B1 (64 bit,240-pin module)

DDR DIMM_B2 (64 bit,240-pin module)

CHA_FAN1

CPU_FAN1

PRI_IDE1

ITE

8211

ALC880

EATXPWR1

SATA3

SATA2

SATA4

PCI2

SPDIF_OUT1

Kinnereth

82562EZ

R

LGA775

PS/2KBMS

T: Mouse

B: Keyboard

Below:Mic In

Center:Line Out

Top:Line In

F_USB12

LAN_USB34

PCIEX1_1

PCIEX16

COM1

PARALLEL PORT

VGA1

SPEAKER1

PLED1

R

®

USBPW12

USBPW34

3

2

1+5V

(Default) +5VSB

F_PANEL1

*

Requires an ATX power supply

.

PWR

Ground GNDReset

IDE_LED+

IDE_LED-

RESET

IDE LED

PWRSW

FANPWR1

PLED1

PLED+

1

NC

PLED-

FANPWR1

DC modePWM

(Default)

12 23

ASUS P5GD1-VMASUS P5GD1-VM

ASUS P5GD1-VM 1-71-7

1-71-7

1-7

Do not overtighten the screws! Doing so can damage the motherboard.

1.5.21.5.2

1.5.2 Placement directionPlacement direction

Placement directionPlacement direction

Placement direction

When installing the motherboard, make sure that you place it into the

chassis in the correct orientation. The edge with external ports goes to the

rear part of the chassis as indicated in the image below.

1.5.31.5.3

1.5.3 Screw holesScrew holes

Screw holesScrew holes

Screw holes

Place eight (8) screws into the holes indicated by circles to secure the

motherboard to the chassis.

Place this side towardsPlace this side towards

Place this side towards

the rear of the chassisthe rear of the chassis

the rear of the chassis

P5GD1-VM

1-81-8

1-8 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

P5GD1-VM

®

P5GD1-VM Socket 775

1.6.11.6.1

1.6.1 Installing the CPUInstalling the CPU

Installing the CPUInstalling the CPU

Installing the CPU

To install a CPU:

1. Locate the CPU socket on the motherboard.

1.6 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA775 socket designed for

the Intel

®

Pentium

®

4 processor in the 775-land package.

Before installing the CPU, make sure that the socket box is facing

towards you and the load lever is on your left.

• Your boxed Intel

®

Pentium

®

4 LGA775 processor package should

come with installation instructions for the CPU, heatsink, and the

retention mechanism. If the instructions in this section do not match

the CPU documentation, follow the latter.

•

Upon purchase of the motherboard, make sure that the PnP cap is

on the socket and the socket contacts are not bent. Contact your

retailer immediately if the PnP cap is missing, or if you see any

damage to the PnP cap/socket contacts/motherboard components.

ASUS will shoulder the cost of repair only if the damage is shipment/

transit-related.

•

Keep the cap after installing the motherboard. ASUS will process

Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA775 socket.

• The product warranty does not cover damage to the socket

contacts resulting from incorrect CPU installation/removal, or

misplacement/loss/incorrect removal of the PnP cap.

ASUS P5GD1-VMASUS P5GD1-VM

ASUS P5GD1-VM 1-91-9

1-91-9

1-9

3. Lift the load lever in the

direction of the arrow to a 135º

angle.

4. Lift the load plate with your

thumb and forefinger to a

100º angle (A), then push

the PnP cap from the load

plate window to remove (B).

To prevent damage to the socket pins, do not remove the PnP cap

unless you are installing a CPU.

5. Position the CPU over

the socket, making

sure that the gold

triangle is on the

bottom-left corner of

the socket. The

socket alignment key

should fit into the

CPU notch.

Alignment keyAlignment key

Alignment key

Gold triangle markGold triangle mark

Gold triangle mark

Load plateLoad plate

Load plate

A

B

2. Press the load lever with your thumb (A), then move it to the left (B)

until it is released from the retention tab.

Retention tabRetention tab

Retention tab

Load leverLoad lever

Load lever

This side of theThis side of the

This side of the

socket box shouldsocket box should

socket box should

face you.face you.

face you.

PnP capPnP cap

PnP cap

A

B

1-101-10

1-10 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

The CPU fits in only one correct orientation. DO NOT force the CPU into

the socket to prevent bending the connectors on the socket and

damaging the CPU!

6. Close the load plate (A), then

push the load lever (B) until

it snaps into the retention

tab.

A

B

The motherboard supports Intel

®

Pentium

®

4 LGA775 processors with

the Intel

®

Enhanced Memory 64 Technology (EM64T), Enhanced Intel

SpeedStep

®

Technology (EIST), and Hyper-Threading Technology. Refer

to the Appendix for more information on these CPU features.

Page is loading ...

Asus P5GD1 User manual

This manual is also suitable for

Asus P5GD1 User manual

Related papers

Other documents