SMITH SYSTEM 55014 Assembly Instructions

Brand
SMITH SYSTEM
Model
55014
Type
Assembly Instructions

This manual is also suitable for

Assembly Instructions
Flowform Flex Screen
If you have damaged or missing components,
please contact customer service at 1-800-328-1061
Document #: 179701 REVISED: 07/2022
Hardware and Components
Document #: 179701 REVISED: 07/2022
FLEX SCREEN PANEL
(PN: 60179)
QTY. 1
3/16” ALLEN WRENCH
QTY. 2
1/4”-20 X 5/8”
SHOULDER BOLT
QTY. 6
1/4”-20 X 3/8”
BARREL NUT
QTY. 6
MOUNTING FEET
QTY. 3
Special Notes:
•TOOLS REQUIRED:
•Optional Drill w/ 3/16” Allen Wrench driver bit.
•Check that all components are accounted for and undamaged before assembling.
•Please assemble the product in a clean and dry area.
•Clean the product with a mild cleaner and a damp cloth.
•Replacement hardware listed on last page.
(PN:60180)
Assembly Instructions
Document #: 179701 REVISED: 07/2022
1. Lay Flex Screen Panel down on a clean smooth surface that will not harm the panel.
2. Align the holes in the top brackets of a Foot with the holes on one of the ends Flex
Screen Panel. The bottom of the foot should end up even with the panel.
Document #: 179701 REVISED: 07/2022
3. Install two of the 1/4”-20 X 5/8” Shoulder Bolts and 2 of the 1/4”-20 X 3/8” Barrel
Nuts using the two 3/16” Allen Wrenches as shown. Repeat steps 2 through 3 for the
other two feet.
HINT: You could used one of the Allen Wrenches and an optional power drill with a
3/16” Allen bit.
4. Lift the assembled Flex Screen into the upright position.
ASSEMBLY COMPLETE
Replacement Hardware
Document #: 179701 REVISED: 07/2022
3/16” ALLEN WRENCH
QTY. 2
1/4”-20 X 5/8”
SHOULDER BOLT
QTY. 6
1/4”-20 X 3/8”
BARREL NUT
QTY. 6
[REPLACEMENT HARDWARE PACK: 60187-R]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

SMITH SYSTEM 55014 Assembly Instructions

Brand
SMITH SYSTEM
Model
55014
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents