morse 15, 15-SS, 2-15 User manual

Hello! I've reviewed the CE Declaration of Conformity for the MORSE 15 Series Can Tipper. This document confirms that the product meets the necessary safety standards and complies with relevant directives, specifically the Machinery Directive 2006/42/EC and the EN 60204 Safety of Machinery standard. I am ready to answer any questions you have about this device based on this document.
What is the product covered by this declaration?

What model is covered by this declaration ?

What is the serial number range covered by this declaration?

What directives and standards does this product comply with?

The Specialist In Drum Handling Equipment

CE Declaration of Conformity

15 Series Can Tippers

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

CE Declaration of Conformity

This product has been tested to the current appropriate standards

and is in compliance with the following

-------------------------------------------------------------------

Machinery Directive: 2006/42/EC

Standard: EN 60204 Safety of Machinery

-------------------------------------------------------------------

Manufacturer’s Name: MORSE Mfg. Co., Inc.

Manufacturer’s Address: 103 Kuhn Rd.

Syracuse, NY 13208

Product: Can Tippers

Model: 15 Series

Serial Number: 400000 and up

-------------------------------------------------------------------

This Certicate of Compliance issued 2022 is valid for the test sample of the product specied

above and that it conforms to the Directive(s) and Standard(s).

Signature:

Nathan Andrews

President

Morse Manufacturing Company, Inc.

103 Kuhn Rd.

Syracuse, New York, USA 13208

Phone: (315)-437-8475

Fax: (315)-437-1029