2. ROOMS TO GO
  3. 76422220

ROOMS TO GO 76422220 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Tessere FK3P bar table. This manual details the steps needed to put together your new table, which includes attaching the legs, and the umbrella cap. I am ready to answer your questions.
  • What is included in the hardware package?
    How many legs are there?
    What tool is needed for assembly?
4pc
A
B
C
D
E
F
G
Umbrella cap
Leg
Table top
FK3P
Manufactured by EFAR for Rooms To Go
Place the Table top on the clean, soft surface as a blanket or carpet. Assemble the Leg part (A) to the Table top (B) by Flat washer,
Spring washer, Hex nut (D,E,F) and loosely tighten with Wrench (G).When inserting the Hex nuts, loosely tighten
each about
5-6 full turns and ensure each of the 4 Hex nuts t well. Once all 4 are inserted and loosely tightened, proceed to
fully tighten each Hex nut.
After assembling, your product is ready to use.
D
A
A
B
C
E
F
G
Attach the umbrella cap to the table top
FK3P
Manufactured by EFAR for Rooms To Go
Adjustable levelers
/