Hay TAMOTO BED User manual

Type
User manual
– INSTRUCTION MANUAL –
DESIGN BY SHANE SCHNECK
TAMOTO BED
I
Foot
H
Middle leg*
K
Headboard
J
Stretcher
A
Screw
B
Screw
C
Screw
E
Glider
F
Allen key
G
Middle stretcher*
L
Slats**
D
Textile cover
 PARTS 
*Not for all sizes
**Sold separately in some markets
1.
Connect the stretchers
J
to the foot of the frame using the screws
A
and the
Allen key
F
. Mount all the screws loosely before tightening them completely.
Then press the gliders
E
onto the legs.
2.
Connect the frame to the headboard
K
using the screws
A
and the Allen key
F
.
Mount all the screws loosely before tightening them completely.
Then press the gliders
E
onto the legs.
3.
Connect the frame to the headboard
K
using the screws
B
and the Allen key
F
.
Mount all the screws loosely before tightening them completely.
4.
Remove the textile covering the velcro on all four stripes.
Drape the textile cover
D
over the headboard.
Make sure the HAY label is on the backside of the headboard.
5.
Pull the cover down on both sides. Then zip the zipper and press
the velcro together, both at the sides and on the bottom.
6.
Press the glider
E
onto the middle leg
H
. Mount the middle stretcher
G
with the
middle leg
H
underneath. Secure it with the screws
A
using the Allen key
F
.
Mount all the screws loosely before tightening them completely.
NOTICE
The middle leg and the middle
stretcher are not included
for all sizes.
7.
Mount the slats*
L
using the screws
C
with the Allen key
F
.
Mount all the screws loosely before tightening them completely.
*Sold separately in some markets
8.
Place the mattress on top of the slats.
 CARE & MAINTENANCE  CARE & MAINTENANCE 
The textile cover is dry clean only.
Pull out the reinforcements from each corner before cleaning.
 CARE & MAINTENANCE  CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Tamoto Bed by scanning the QR code
You can also find the same information here
hay.dk/downloads
10012023
Havnen 1 8700 Horsens Denmark
+45 3164 6000 / hay@hay.com
www.hay.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Hay TAMOTO BED User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI