Page is loading ...
1
Choosing Power Supply
a Connect the AC power cord to the
AC Mains.
(Make sure you remove batter-
ies)
-OR-
b (1) Make sure you remove the
power cord from the set and
wall outlet.
(2) Open the battery door and
insert 6 x C batteries.
38
Press to start
or pause CD
playback.
Power slider
Slide to select func-
tion CD, AM, FM,
OFF.
Quick Use
Guide
Quick Use
Guide
A
C
M
A
I
N
S
~
6xR14•UM-2•C-CELLS (not included)
1a
3b
2
Listening to the Radio
a Adjust the Power Slider to
FM or AM.
bPress and hold PROG until
the display shows Auto.
• Available stations are pro-
grammed. (20FM, 10AM)
cPress
PRESET +, -
to select a preset radio
station.
3
Playing a CD
This CD player plays Audio Discs including CD-Recordables and CD-
Rewritables.
a Adjust the Power Slider to CD.
b Opens the CD door.
c Insert a CD with the printed side facing up and close the door.
dPress
38 to start playback.
e To stop CD playback, press 9.
9
Press to stop CD play-
back or erase a CD
program.
OPEN•CLOSE
Press to open the CD
door.
PROG
Use to program CD
tracks and preset radio
stations.
Insert 2 batteries,
type AAA, R03 or
UM4 (not included)
Telescopic antenna
Improves FM recep-
tion.
REMOTE CONTROL
(for AZ1325 only)
SEARCH ∞§
Skips & searches CD
tracks backwards/for-
wards.
Tunes to radio stations
(down/up).
2a
3a
AZ1301, AZ1325
3d
3e
MODE
Use to select different
play modes: e.g.
REPEAT or SHUF-
FLE
VOLUME 3,4
Press to adjust volume
level (maximum to 32).
PRESET +, -
Press to select a preset
radio station (up/down)
A
C
M
A
I
N
S
~
p - 3.5mm
stereo head-
phone jack
Display
illumination: Low
2b
2c
1b
AZ1325_1301-QUG-Eng 7/6/04 14:02 Page 1
/