Panasonic TXP46Z1B Operating instructions

Category
Plasma TVs
Type
Operating instructions

This manual is also suitable for

TQB0E0872-1
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
English
U.K. Standard
Operating Instructions
Plasma Television
Model No. TX-P46Z1B
TX-P54Z1B
2
Digital Switchover for Terrestrial broadcasts
Starting in late 2007 and ending in 2012, TV services in the UK will go completely digital, TV region
by TV region.
If you have any questions, please call Digital UK on 08456 50 50 50 or visit www.digitaluk.co.uk
Digital Switchover will cover a period of several weeks. When it starts you will lose all Analogue TV
channels and some Digital TV channels will be missing.
You will need to retune your TV each time this happens to recover your digital channels.
To retune your TV
“Auto Setup” in “DVB Tuning Menu”-DVB mode (p. 41)
Users of cable or satellite boxes should still retune the TV to continue to receive Freeview channels
via their aerial. (Your Analogue channel for viewing Cable or Satellite services will change to a new
position.)
Due to the digital reception technologies involved, quality of the digital signals may be relatively low in some
cases, despite good reception of analogue channels.
Features
WirelessHD™
The WirelessHD™ standard transmits uncompressed Full HD content wirelessly with no deterioration in sound
or picture signal quality.
freesat HD tuner
Receives freesat - free digital satellite broadcasts in the UK
This TV is compatible with freesat HD.
freesat is a brand new free digital TV service which broadcasts via satellite so you can receive TV, radio,
interactive TV, and HD TV with crystal clear reception.
You can enjoy sharp pictures, vivid colours, multi-channel sound, and various services with the interactive
content.
Receives DVB digital terrestrial broadcasts
Select the programme or set Timer Programming easily by using TV Guide. (p. 25 and p. 26)
Register and instantly call up favourite channels with Favourites Edit. (p. 45)
DVB - Digital Video Broadcasting
VIERA TOOLS-Display special feature icons for easy accessibility (p. 20)
VIERA TOOLS is the easy way to access the special features with the VIERA TOOLS button.
DLNA
DLNA is a standard that makes digital electronics easier and more convenient to use on a home network.
For example, you can enjoy watching photos and movies stored in the PC connected to your home network by
accessing from the TV. (p. 64)
VIERA CAST - Enjoy great web entertainment (p. 67)
Enjoy the internet contents on the TV such as photos, movies, weather, etc. through an easy-to-use web
interface that is built into the TV.
VIERA IMAGE VIEWER - SD Card viewer (p. 68 - 71)
Enjoy your photos or movies recorded in SD Card on the TV screen.
Links up and controls the connected equipment with “Q-Link” and “VIERA Link” (p. 72 - 79)
Easy recording and playback, create home theatre without complicated settings, etc.
Sharp pictures with HDMI connection (p. 88)
Enjoy high-definition digital picture and high-quality sound by using an HDMI cable.
This TV incorporates HDMI™ (Version 1.3a with Deep Colour, x.v.Colour™) technology.
GUIDE Plus+ (p. 25)
This TV supports Gemstar-TV Guide sent from the GUIDE Plus+ system.
Owner ID (p. 53)
Owner ID is an anti-theft function. Entering the PIN number and owner’s personal information will help the
Police to determine the owner.
DivX
Offers good compatibility when going from PC to TV, etc. for easy enjoyment of moving pictures. DivX is a
video codec that was developed by DivX, Inc. (p. 86)
Provides suitable images for playing games (p. 36)
Selecting “Game” in Viewing Mode provides fast response to the input signal and you can enjoy playing games.
Supports Audio Description signal (p. 22 and p. 37)
This function can add an additional sound track to describe events on-screen (narration) and aids
understanding and enjoyment, particularly for visually-impaired viewers.
You can switch Audio Description service Auto or Off, and adjust the volume of the description sound track.
Viewing Advanced FAQs, etc.
Quick Start Guide
3
FULL HD
This TV uses a high definition panel to produce high
definition pictures close to their original resolution.
HD TV 1080p
This TV supports high definition TV signals.
Dolby Digital Plus decoder
Possible to decode Dolby Digital Plus audio track (multi-
channel sound) and output as Dolby Digital multi-channel
sound signal from DIGITAL AUDIO OUT terminal.
SDHC Card
This TV supports SDHC Card. SDHC is a high storage
capacity card.
AVCHD
Possible to play the moving pictures recorded in SD
Card by AVCHD format.
AVCHD is a high definition recording format.
Layout Flexibility 1-inch Full-flat display
(TX-P54Z1B)
With the thin and light designs, this TV offers
unique new installation styles that have never
before been possible.
Neo PDP
Realizes high picture quality and energy efficient
panel.
Intelligent Frame Creation
This increases the frame count and removes
juddering movements, for smooth and
flicker-less motion images with high resolution.
24p Smooth Film
This item is displayed instead of “Intelligent
Frame Creation” when 24p signal input, and
produces smoother playback of 24p source
movies.
Over 2,000,000:1 INFINITE BLACK
A wide contrast ratio will deliver pictures with a
deep black level and a brighter white level for
greater image depth.
0.001 msec Panel Response Time
Extremely fast response time to minimise picture
lag.
THX Certified Display
Faithfully reproduces the image quality of THX
movies that the filmmakers intended.
Eco Mode
Adjusts picture settings automatically dependent
on ambient lighting conditions.
V-Audio ProSurround
Utilises Panasonic’s advanced digital
amplification technology.
Lead-free display
All VIERA plasma display panels are lead-free.
This reduces the impact on the environment
when recycling or disposing of them in the future.
Up to 100,000 hours Plasma Panel Lifetime
The Plasma display panel used in the 2009 VIERA
TV range is rated for up to 100,000 hours.
This measurement is based on the time taken for the
brightness of the panel to reduce to half of it’s maximum level.
The time taken to reach this level may vary depending on the
image content and the environment where the TV is used.
Image retention and malfunctions are not taken into account.
digital tick
The digital tick logo indicates that a digital
tuner is built-in.
Freeview
Freeview is the way to enjoy digital TV for free.
There are up to 48 digital TV channels.
Contents
Be Sure to Read
Safety Precautions ············································ 4
(Warning / Caution)
Notes ································································· 5
Maintenance
······················································ 6
Options ······························································ 6
Quick Start Guide
Accessories ························· 7
Basic Connection ·············· 12
Identifying Controls ············ 16
Auto Setup ························· 18
Enjoy your TV!
Basic Features
How to Use VIERA TOOLS ····························· 20
Watching TV ···················································· 21
Using TV Guide ··············································· 24
Viewing Teletext ··············································· 27
Watching External inputs ································· 30
How to Use Menu Functions
··························· 32
(picture, sound quality, etc.)
Advanced Features
Retuning from Setup Menu ····························· 40
Tuning and Editing Channels (freesat) ············ 42
Tuning and Editing Channels (DVB) ················ 44
Tuning and Editing Channels (Analogue) ········ 46
Tuning and Editing Channels (Other Sat.) ······· 48
Child Lock ························································ 51
Shipping Condition ·········································· 52
Owner ID ························································· 53
Advanced Settings ·········································· 54
Input Labels
····················································· 56
Multi Window
··················································· 57
Recording Controls
·········································· 58
Using Network Services
·································· 60
(DLNA / VIERA CAST / freesat)
Viewing from SD Card ····································· 68
(VIERA IMAGE VIEWER)
Link Functions ················································ 72
(Q-Link / VIERA Link)
Displaying PC Screen on TV ··························· 80
Pairing Remote Control
··································· 81
External Equipment
········································· 82
FAQs, etc.
Technical Information ······································ 84
FAQs ······························································· 90
On screen messages ······································ 93
Glossary
·························································· 97
Licence
···························································· 97
Index
································································ 98
Specifications
·················································· 98
4
Safety Precautions
Warning & Caution
Do not remove the cover
Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside.
Do not expose your ears to
excessive volume from the
headphones
Irreversible damage can be caused.
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the unit to direct sunlight and other
sources of heat. To prevent fire never place any
type of candle or naked flame on top or near the
unit.
Do not place the unit on
sloped or unstable surfaces
The unit may fall off or tip over.
Do not expose to rain or
excessive moisture
To prevent damage which might result in electric
shock or fire, do not expose the unit to rain or
excessive moisture.
The unit must not be exposed to dripping or
splashing water and objects filled with liquid, such
as vases, must not be placed on top of or above
the unit.
Do not block the rear
ventilation openings
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, tablecloths and curtains.
Power source
This TV is designed to operate on 220-240 V,
50 / 60 Hz AC.
Transport only in upright position
Transporting the Display Unit with its display panel
facing upright or downward may cause damage to
the internal circuitry.
The Display Unit is heavy.
Handle the Display Unit by
2 or more people. Support as
shown to avoid injury by the
Display Unit tipping or falling.
When the Wireless Receiver is attached, do not
hold it.
Do not allow children to
handle SD Card
As with a small object, SD Card can be swallowed
by young children. Please remove SD Card
immediately after use.
Use only the dedicated
pedestals / mounting equipment
Using an unapproved pedestal or other fixtures
may make the Display Unit unstable, risking injury.
Be sure to ask your local Panasonic dealer to
perform setup.
Use approved pedestals / mounts (p. 6).
Handling the mains plug and lead
Ensure that the mains plug is easily accessible at all times. The On / Off switch on this model does not fully
disconnect the unit from the mains supply. Remove the mains plug from the wall socket when the unit is not
used for a prolonged period of time.
Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective
earthing connection.
AC 220-240 V
50 / 60 Hz
5
Allow sufficient space around the
Display Unit for radiated heat
Minimum distance
10
10
10
3
(cm)
When using the pedestal, keep the space between the
bottom of the Display Unit and the surface where the
Display Unit is set.
In case of using Wall-hanging bracket, follow the manual of it.
Radio waves
Do not place the unit in any medical institutions or locations
with medical equipment. Radio waves from the unit may
interfere with the medical equipment and cause accidents
due to the malfunction.
Do not use the unit near any automatic control equipment
such as automatic doors or fire alarms. Radio waves from
the unit may interfere with the automatic control equipment
and cause accidents due to the malfunction.
Keep the remote control, Tuner Box and Wireless Unit away
at least 22 cm from the location where a cardiac pacemaker
is implanted. Radio waves from the unit may interfere with
the operation of the pacemaker.
Do not disassemble remote control, Tuner Box or
Wireless Unit. It may cause troubles such as difficulties in
communication.
IMPORTANT:
THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING
TEXT CAREFULLY.
The unit is supplied with a moulded three pin mains plug for
your safety and convenience. A 10 amp (Tuner Box) / 13 amp
(Display Unit) fuse is fitted in this mains plug. Shall the fuse
need to be replaced, please ensure that the replacement fuse
has a rating of 10 amps (Tuner Box) / 13 amps (Display Unit)
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body
of the fuse.
If the mains plug contains a removable fuse cover, you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used
until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local
Panasonic dealer.
Do not cut off the mains plug.
The supplied mains lead and moulded plug are designed to
be used with the unit to avoid interference and for your safety.
If the socket outlet in your home is not suitable, get it changed
by a qualified electrician.
If the plug or mains lead becomes damaged, purchase a
replacement from an authorized dealer.
WARNING: – THIS TV MUST BE EARTHED.
How to replace the fuse.
Open the fuse compartment with a
screwdriver and replace the fuse.
Notes
Do not display a still picture
for a long time
This causes the image to remain on the
plasma screen (“image retention”).
This is not considered a malfunction and is
not covered by the warranty.
Typical still images
Channel number and
other logos
Image displayed in
4:3 mode
Video game
Computer image
To prevent image retention, contrast is
lowered automatically after a few minutes
if no signals are sent or no operations are
performed. (p. 90)
Auto power standby function
If no signal is received and no operation
is performed in Analogue TV mode for 30
minutes, the unit will automatically go to
standby mode.
The unit will automatically go to Standby
mode if there are no signal and no
operation between the Display Unit and
the Tuner Box for a while.
Tuner Box - after 1 minute
Display Unit - after 10 minutes
Keep the unit away from these
types of equipment
Electronic equipment
In particular, do not place video
equipment near the unit. (Electromagnetic
interference may distort images / sound.)
Equipment with an infrared sensor
This unit also emits infrared rays. (This
may affect operation of other equipment.)
Adjust the panel to your desired
angle (TX-P46Z1B)
Ensure that the pedestal does not hang
over the edge of the base even if the TV
swivels to the full rotation range.
Do not place any objects or hands within
the full rotation range.
10˚ 10˚
(View from the top)
500 mm
383 mm
Set the mark at the centre as
illustrated, to ensure full degree
rotation in either direction.
Visible part of the pedestal will remain
parallel to the TV even when rotated.
6
Maintenance
Options
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is
dry.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may
degrade surface quality).
Cabinet, Pedestal, Tuner Box
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Take care not to subject the unit’s surfaces to detergent. (A liquid inside the unit could lead to product failure.)
Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may
deteriorate the surface by peeling the paint).
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
Wireless Unit (Receiver and Transmitter)
Wipe the glossy surface of Receiver and Transmitter gently with the Cleaning cloth (supplied).
Optional accessories
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
Wall-hanging bracket
TY-WK5P1SW
TX-P46Z1B
a: 472 mm / b: 300 mm
TX-P54Z1B
a: 516 mm / b: 300 mm
(View from the side)
Rear of the Display Unit
Holes for wall-hanging
bracket installation
a
Depth of screw:
Please be sure to keep this length 9 mm
b
Screw for fixing the Display Unit onto the
wall-hanging bracket (not supplied with the TV)
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to
prevent the Display Unit from tipping over.
Handle the Display Unit carefully during installation since subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in
the wall before hanging bracket.
When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the
connecting cables not to press against the wall when the Display Unit is tilted forward.
To prevent fall and injury, remove the Display Unit from its fixed wall position when it is no longer in use.
Accessories
Maintenance ●●Options
Quick Start Guide
7
Accessories
Pedestal
TBLX0105 (TX-P46Z1B)
TBLX0107 (TX-P54Z1B)
p. 8
Pedestal installation kit
TXFEL01DMUB
p. 8
(2)
(4)
(4)
TXFBL01JUUJ
p. 8
Speaker (2)
SP-46Z1E (TX-P46Z1B)
SP-54Z1E (TX-P54Z1B)
p. 10
Standard accessories
Check that you have the accessories and items shown
Display Unit
Remote Control
N2QBYB000002
abc def
jkl
ghi
mno
tuvpqrs
wxyz
Batteries for the
Remote Control (2)
R6 (UM3)
Cleaning cloth
TXFPE01RLTB
Clamper (2)
TMME289
p. 15
Tuner Box
TU-Z100BR
p. 12 and p. 13
Ferrite core (2)
J0KG00000014
p. 83
Use the Ferrite cores to
comply with the EMC
standard.
HDMI cable
K1HY19YY0004
or
K1HY19YY0006
p. 12
Wireless Unit
TU-WH1E
p. 13
(2)
Speaker installation kit
TXFKR01JXUE
p. 10
(8) (8)
Operating Instructions
Pan European Guarantee Card
CRM (Customer Relationship Management)
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
8
Accessories
Installing / removing remote’s batteries
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Do not disassemble or modify the remote control.
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the Display Unit may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the Display Unit, and it might fall over and become damaged, and personal injury may
result.
Ensure that the Display Unit does not fall over.
If the Display Unit is knocked or children climb onto the pedestal with the Display Unit installed, the Display Unit
may fall over and personal injury may result.
Two or more people are required to install and remove the Display Unit.
If two or more people are not present, the Display Unit may be dropped, and personal injury may result.
Pedestal
TBLX0105 (TX-P46Z1B)
TBLX0107 (TX-P54Z1B)
Base
TBLA0421 (TX-P46Z1B)
TBLA0460 (TX-P54Z1B)
Frame
TBLA0462 (TX-P46Z1B)
TBLA0464 (TX-P54Z1B)
Pedestal installation kit
TXFEL01DMUB TXFBL01JUUJ
Assembly screw (2)
(Silver)
XYN8+F30FN
Assembly screw (4)
(Black)
XSB4+10FNK
Assembly screw (4)
(Black)
THEL062N
M8 × 30 M4 × 10 M5 × 25
Holder cover
TBLB3416
Accessories
Quick Start Guide
9
Assembling the pedestal
Remove the Cable cover from the Frame .
Cable cover will be used again after the
pedestal is attached to the Display Unit.
B
Cable cover
Use the assembly screws to fasten securely.
Make sure that the screws are securely tightened.
Be careful not to scratch the surface (part with gloss finish) of the base during assembly.
A
A
B
B
C
Hole for the
Base installation
Securing the Display Unit
Slide the pedestal frame posts into the brackets on
the rear of the Display Unit.
Use the assembly screws to fasten securely.
Make sure that the screws are securely tightened.
E
Attach the Holder cover with assembly screws .
Make sure that the screws are securely tightened.
D
F
4
Attach the Cable cover.
Cable cover
Place a cable in
the groove as
necessary and
attach the Cable
cover.
The lower part
of the groove is
separated in right
and left. Use the
one suitable for
you.
10
Accessories
Attaching the Speakers
Speaker
SP-46Z1E (TX-P46Z1B)
SP-54Z1E (TX-P54Z1B)
Speaker (2)
Speaker installation kit
TXFKR01JXUE
Mounting bracket-[Top] (2)
TXFKR04DLUJ
Mounting bracket-[Lower right]
TXFKR02JXUE
Mounting bracket-[Lower left]
TXFKR03JXUE
Assembly screw
TXFXY01DLUJB
Speaker cable (2)
TXJ/SPDKUU-1
(8)
(8)
Use the assembly screws - to fasten the Mounting
brackets to the rear of the Display Unit securely.
Make sure that the screws are securely tightened.
Note
Loosen these screws to
adjust the gap between the
Speaker and the Display Unit
as necessary.
C
-
E-a
B
Ensure that the silver
part is facing the front
Display Unit
Insert the assembly screws - temporarily in the
screw outermost holes of the Speaker and place
the temporarily inserted screws into the counter sunk
holes on the Mounting brackets .
A
C
B
E-- b
Accessories
Quick Start Guide
11
Use another two assembly screws - to fasten the
Speaker to the Mounting brackets .
C
A
B
E-- b
4
Adjust the speaker position and make sure that the
assembly screws - are securely tightened.
E b
5
Connect the Speaker and the Display Unit with the
Speaker Cable .
Insert the terminal firmly.
Connect the terminal near the Ferrite core to the Display
Unit.
Fix the cable with the clamper on the Mounting bracket
.
F
A
C
Push here to
remove the hook
hook
Fix the cable
Display Unit
clamper
Ferrite core
terminal
Note
Fix the other side speaker in the same way.
There will be a gap between the Display Unit and the Speaker.
Do not hold the Speaker part to transport the Display Unit.
12
Connecting the Display Unit and the Tuner Box
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Conditions
If you are going to place the Tuner Box close to or under the Display Unit, it is recommended to connect them
using the supplied HDMI cable.
If your installation layout is not suitable for using the Wireless Unit (Example 2), connect them using the
supplied HDMI cable.
Example 1 (below)
You can place the Tuner Box and the Display Unit in a flexible way using the Wireless Unit (not using any
cables between the Display Unit and the Tuner Box). To use wireless connection between the Display Unit and
the Tuner Box, ensure that the Wireless Transmitter and the Wireless Receiver are positioned to face each
other without any obstructions.
Example 2 (p. 12 and p. 13)
Example 1
Tuner Box
TU-Z100BR
HDMI cable
K1HY19YY0004
AUDIO
IN
COMPONENT
AUDIO
OUT
DIGITAL
AUDIO OUT
HDMI 1
P
B
Y
P
R
L
R
L
R
HDMI 2 HDMI 3
A
B
Rear of the Display Unit
Rear of the Tuner Box
Mains lead
AC 220-240 V
50 / 60 Hz
Mains
lead
Tuner Box
or
K1HY19YY0006
HDMI cable
3.0 m
Example 2
The Wireless Unit uses 60 (59.40 - 61.56) GHz frequency band. Do not use the Wireless Unit near the
equipment using the same frequency band to avoid the interference.
It may take a while to change the input mode when using the Wireless Unit. To resolve this, use the supplied
HDMI cable to connect the Display Unit and the Tuner Box. Example 1 (above)
Picture and sound may be interrupted or lost completely depending on the positioning of the Wireless
Transmitter or obstacles (furniture, AV equipment, rack, rack door, etc.) between the Wireless Transmitter
and the Wireless Receiver. To resolve this, change the installation layout to avoid any obstacles between the
Wireless Transmitter and the Wireless Receiver.
Transmission Range of the Wireless Unit : Available area to place the Wireless Transmitter
40°
Wireless
Transmitter
Wireless
Transmitter
View from the side
View from the top
10 m
10 m
5 m5 m
80° 80°
Wireless
Receiver
Display
Unit
Display Unit
Tuner Box
Tuner Box
Wireless
Receiver
45°
45°
5 m
5 m
Adjust the angle of the
Wireless Transmitter to
face the Wireless Receiver.
Caution
Do not place the Wireless Unit in the following locations to avoid poor signal condition or unit failures.
Location subject to be high temperature (near the heater, etc.)
Location with poor air circulation (at the end of a closed rack, etc.)
Keep the Wireless Unit away from the devices such as wireless LAN, microwaves, mobile phones or other
electric equipment to avoid radio wave interference. Otherwise malfunction or slow response may occur.
Note
The range may be shortened depending on the obstacles, the surrounding environment or building structure.
Ensure the Wireless Transmitter is facing the Wireless Receiver.
Basic Connection
Basic Connection
Quick Start Guide
13
Tuner Box
TU-Z100BR
Wireless Unit
TU-WH1E
Tuner Box Wireless Unit (Receiver and Transmitter)
TZTWH01JSUE
Assembly screw (2)
TXFXY01JSUJB
Wireless Receiver Wireless Transmitter
M4 × 10
Exclusive cable for Wireless Unit Cable clamper (2)
TMME364
For Wireless Receiver
TXFMM02JSUE
For Wireless Transmitter
TXFMM03JSUE
0.5 m 1.0 m
Attach the Wireless Receiver - to the Display Unit with assembly screws .
Insert the top tab into the groove of the Display Unit, and then insert the front tabs.
Make sure that the screws are securely tightened.
C
B-a
Rear of the Display Unit
top tab
front tab
Connect the Wireless Receiver - and the Display Unit with exclusive cable - .
D-a
B-a
Rear of the Display Unit
Ferrite core
Note
Connect the terminal near
the Ferrite core to the
Display Unit.
Connect the Wireless Transmitter - and the Tuner Box with exclusive cable - .
AV 2
AV 1
AUDIO
IN
COMPONENT
AUDIO
OUT
DIGITAL
AUDIO OUT
HDMI 1
RGB
VIDEO
S VIDEO
RGB
VIDEO
P
B
Y
P
R
L
R
L
R
HDMI 2 HDMI 3
A
D-b
B-b
Ferrite core
Rear of the Tuner Box
Rear of the
Wireless Transmitter
Note
Connect the terminal near
the Ferrite core to the Tuner
Box.
4
Bind the cables with Cable clampers .
A
E
E
B-a
B-b
Hole for Cable clamper
Hole for
Cable clamper
Rear of the
Wireless Transmitter
Rear of the Display Unit
Mains lead
AC 220-240 V
50 / 60 Hz
Mains lead
Insert the Cable clamper
in a hole
Open the clamper
and insert the cable
Close the clamper and slide
up to fix the terminal securely
hole
cable
14
Basic Connection
Connecting the Tuner Box and dish / aerial / external equipment
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
Read the manual of the equipment too.
Example 1
Connecting dish or aerial (TV only)
AV 2
AV 1
AUDIO
IN
COMPONENT
AUDIO
OUT
DIGITAL
AUDIO OUT
HDMI 1
RGB
VIDEO
S VIDEO
RGB
VIDEO
P
B
Y
P
R
L
R
L
R
HDMI 2 HDMI 3
Aerial input
terminal
Rear of the Tuner Box
RF cable
Terrestrial
aerial
For digital
terrestrial
and analogue
broadcasts
Mains lead
AC 220-240 V
50 / 60 Hz
Satellite
dish
Satellite
cable
For freesat or
other satellite broadcasts
The freesat channel uses Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East satellites. To ensure your satellite
dish is correctly installed please consult your freesat registered dealer.
Example 2
Connecting DVD Recorder / VCR
RF OUT
RF IN
AV 2
AV 1
AUDIO
IN
COMPONENT
AUDIO
OUT
DIGITAL
AUDIO OUT
HDMI 1
RGB
VIDEO
S VIDEO
RGB
VIDEO
P
B
Y
P
R
L
R
L
R
HDMI 2 HDMI 3
HDMIAV
RF cable
RF cable
Aerial input terminal
Fully wired
SCART cable
Fully wired HDMI
compliant cable
DVD Recorder or VCR
Rear of the Tuner Box
Terrestrial
aerial
Mains lead
AC 220-240 V
50 / 60 Hz
Connect to the TV’s AV2 for a DVD Recorder / VCR supporting Q-Link (p. 74).
Basic Connection
Quick Start Guide
15
Using the clamper
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s
assembly manual to fix cables.
Rear of the Display Unit
snaps
To loosen:
Keep
pushing both
side snaps
Set the
tip in the
hooks
Insert the clamper
in a hole
Attach the clamper Bundle the cables
Keep
pushing
the knob
knob
hooks
To remove from the TV:
hole
Example 3
Connecting DVD Recorder / VCR and Cable TV box
RF OUT
RF IN
RF OUT
RF IN
AV 2AV 1
HDMI
TV/AVRecorder/AV
HDMI
AV 2
AV 1
AUDIO
IN
COMPONENT
AUDIO
OUT
DIGITAL
AUDIO OUT
HDMI 1
RGB
VIDEO
S VIDEO
RGB
VIDEO
P
B
Y
P
R
L
R
L
R
HDMI 2 HDMI 3
DVD Recorder or
VCR
Fully wired
SCART cable
RF cableRF cable
Aerial input terminal
Fully wired HDMI
compliant cable
Fully wired HDMI
compliant cable
Cable TV box
Cable
Rear of the Tuner Box
Terrestrial
aerial
Mains lead
AC 220-240 V
50 / 60 Hz
Connect to the TV’s AV2 for a DVD Recorder / VCR supporting Q-Link (p. 74).
Connect to the TV’s AV1 for a Cable TV box.
RF cable
Note
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by
using HDMI cable (p. 82).
Network connection p. 61
Q-Link connection p. 72
VIERA Link connection p. 72 and p. 73
HDMI 4
AV3
L
V
S-V
PC AUDIO
via AV3
R
PC
16
Identifying Controls
Display Unit
Tuner Box
Wireless Unit
Remote control signal receiver for the connected equipment’s remote control to
operate the TV
Function select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance /
Auto Setup (p. 40 and p. 41) /
Remote Pairing (p. 81)
Timer LED
Active for Timer Programming or Standby for Direct TV Recording: orange (flash)
Timer Programming On: orange
Power LED
Standby: red
On: green
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
Mains power On / Off switch
Turn the Display Unit On or Off.
When turning Off the Display Unit,
Tuner Box will also be turned to
Standby mode after 1 min.
Standby switch
Turn the Tuner
Box on or off to
standby mode
Selects channel in sequence
Changes the input mode
HDMI4 terminal
(p. 82)
SD Card slot
(p. 68)
AV3 terminals
(p. 82)
Headphones jack
(p. 82)
PC terminal
(p. 82)
Selects channel in sequence
Volume Up / Down
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when
“Eco Mode” in the Picture Menu is set to “On” (p. 36)
Wireless Transmitter
Wireless Receiver
On and no communication : Red
On and communication state good : Green
On and communication state not good : Orange
Indicates malfunction : Red (blinking)
On and no communication : Red
On and communication state good : Green
Indicates malfunction : Red (blinking)
When the orange LED is lit, check the connection and transmission range. (p. 12 and p. 13)
When the red LED is blinking, turn the power of the Tuner Box and Display Unit off and then on again.
If the problem is not resolved, consult your local Panasonic dealer.
Identifying Controls
Quick Start Guide
EXIT
ASPECT
OPTION
TEXT
REC
PROGRAMME
STTL
INDEX HOLD
BACK/
RETURN
MENU
INPUT
TV
G
U
I
D
E
V
I
E
R
A
T
O
O
L
S
V
I
E
R
A
L
i
n
k
DVD/VCR
TV
AVTV
abc def
jkl
ghi
mno
tuvpqrs
wxyz
DIRECT TV REC
17
Remote Control
Cursor buttons
Makes selections and adjustments
Standby On / Off switch
Switches TV On or Off standby
Sound Mute
Switches sound mute On or Off
Aspect (p. 23)
Changes aspect ratio from Aspect Selection
list
Also possible by pressing this button
repeatedly until you reach the desired aspect
Channel Up / Down
Selects channel in sequence
Connected equipment operations
(p. 31 and p. 78)
Teletext (p. 27)
Switches to teletext mode /
interactive services
OK
Confirms selections and choices
Press after selecting channel positions
to quickly change channel
Volume Up / Down
Channel / Programme Information (p. 22)
Displays channel and programme
information
Index (p. 29)
Returns to the teletext index page
(teletext mode)
Coloured buttons
Used for the selection, navigation and
operation of various functions
Exit
Returns to the normal viewing screen
Numeric buttons
Changes channel and teletext pages
Sets characters
When in Standby mode, switches TV On
VIERA Link Menu (p. 76)
Accesses VIERA Link Menu
Guide (p. 24)
Displays TV Guide
Option Menu (p. 23)
Easy setting for viewing and
sound options
Main Menu (p. 32)
Press to access Picture, Sound and
Setup Menus
Subtitles (p. 22)
Displays subtitles
Input mode selection
TV - switches freesat / DVB / Analogue /
Other Sat. mode (p. 21)
AV - switches to AV input mode from Input
Selection list (p. 30)
VIERA IMAGE VIEWER (p. 68)
Switches to SD Card viewing mode
Return
Returns to the previous menu / page
Hold
Freeze / unfreeze picture (p. 21)
Holds the current teletext page (teletext
mode) (p. 28)
VIERA CAST (p. 67)
Displays VIERA CAST home screen
Direct TV Recording (p. 74 and p. 76)
Records programme immediately in
DVD Recorder / VCR with Q-Link or
VIERA Link connection
Surround (p. 37)
Switches Surround sound
VIERA TOOLS (p. 20)
Displays some special feature icons and
accesses easily
Transmission Range
Use the RF remote control within the range of 7 m from the Tuner Box.
The range may be shortened depending on the obstacles, the surrounding environment or building structure.
Caution
Keep the remote control away from the devices such as wireless LAN, microwaves, mobile phones or other
electric equipment to avoid radio wave interference. Otherwise malfunction or slow response may occur.
This remote control is RF (Radio Frequency) remote control.
Signals are sent in virtually every direction, so that you can operate the TV even if the remote control is not
facing the Display Unit or the Tuner Box. In addition, as the radio waves reflect on walls or other obstacles, the
remote control is operable even there are obstacles between the remote control and the Tuner Box.
This remote control uses 2.4 GHz frequency band.
DIRECT TV REC
N
ASPECT
INPUT
AVTV
OPTION
TEXT
REC
PROGRAMME
STTL
INDEX HOLD
G
U
I
D
E
V
I
E
R
A
T
O
O
L
S
DVD/VCR
TV
EXIT
BACK/
RETURN
MENU
TV
abc def
jkl
ghi
mno
tuvpqrs
wxyz
18
Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Please complete preparations and setup of all units before starting Auto Setup. (p. 8 - 13)
Please complete connections (p. 14 and p. 15) and settings (if necessary) of the connected equipment before
starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual.
1
Plug the Display Unit and Tuner Box into
mains socket, and then turn the Display Unit on
Takes a few seconds to be displayed.
2
Pair the remote control with the unit
(simultaneously)
Remote Pairing
Press both "OK" and "1" button for
about 3 seconds until this screen will
disappear
Press the buttons on the remote control
simultaneously for more than 3 seconds to
make the remote control usable.
You can pair the remote control again after
Auto Setup.
“Pairing Remote Control” (p. 81)
(freesat tuning)
freesat Auto Setup
Signal Quality 0 10
Signal Strength 0 10
TV Channels Found 8
Radio Channels Found 2
Data Channels Found 1
Searching
Channels found, creating channel list
Auto Setup will start to search for TV
channels and store them in the numbered
order as specified by the broadcasters.
If “freesat Auto Setup” cannot be done
completely
“FAQs” (p. 90)
(DVB and Analogue tuning)
Auto Setup - DVB and Analogue
Analogue Scan
This will take about 6 minutes.
CH 21 68
DVB Scan CH 21 68
62
CH Channel Name Type Quality
CBBC Channel Free TV 10
62 BBC Radio Wales Free TV 10
62 E4 Free TV 10
62 Cartoon Nwk Free TV 10
29 Analogue
-
33
Free TV: 4 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2
Searching
BBC1 Analogue
-
If Q-Link, or similar technology (p. 74),
compatible recorder with analogue tuner
is connected, analogue channel setting is
automatically downloaded to the recorder.
(Digital channel setting is not downloaded.)
If downloading has failed, you can
download later through the Setup Menu.
“Q-Link Download” (p. 38)
Sending Preset Data
Please wait!
Remote control unavailable
0% 100%
3
Enter your postcode
Enter Postcode for local channels including space
Postcode
A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
O P Q R S T
7 8 9
1
.!:#
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
0
Your postcode is required to receive local
services and sort the channel order.
Please ensure to include a space when
entering your postcode.
If you skip this step, the default postcode
(central London) will be set.
4
Input Owner ID
Owner ID
Please enter new PIN
PIN * * * *
Please enter your own choice of PIN number,
name, etc. to help the police to crack crime.
Make a note of the PIN number in case you
forget it.
You can skip this step and input the Owner
ID later.
“Owner ID” (p. 53)
5
Select “Home”
Please select your viewing environment.
Home Shop
set
select
Auto Setup is now complete and your TV is ready for viewing.
SD Card LED (blue)
To check channel list
at-a-glance
“Using TV Guide”
(p. 24 and p. 25)
To edit channels
“Tuning and
Editing Channels”
(p. 42 - 47)
Auto Setup
Quick Start Guide
19
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
Move the cursor / select the menu item
Move the cursor / adjust levels / select from
a range of options
Access the menu / store settings after
adjustments have been made or options
have been set
BACK/
RETURN
Return to the previous menu
MENU
Open the main menu
EXIT
Exit the menu system and return to the
normal viewing screen
ON SCREEN HELP Instructions box - Operation guide
(example: Owner ID)
Owner ID
EXIT
RETURN
Please enter new PIN
PIN * * * *
PIN entry
0 9
Operation guide will help you.
How to enter the postcode
Set characters one by one Exit the menu to go to next step
select
set
green
You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 87)
How to input Owner ID
Enter the
PIN number
(4 digits)
Select NAME / HOUSE NO /
POSTCODE and access the
“User input” mode
Set characters one by one Return to select
other items
BACK/
RETURN
or
Exit the menu to
go to next step
EXIT
abc def
jkl
ghi
mno
tuvpqrs
wxyz
PIN
NAME
HOUSE NO
POSTCODE
Owner ID-Data Entry


User input
NAME
A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _
O P Q R S T
7 8 9 ! : #
o p q r s t
1
.!:#
2
abc
3
def
4
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
0
Enter the PIN
number twice
at first setting.
access
select
select
set
You can set characters by
using numeric buttons.
“Characters table for numeric buttons” (p. 87)
“Shop” mode (for shop display use only)
Automatic Demo Off / On selection screen is displayed.
Automatic Demo
Off On
(This is not available in “Home” mode)
You can change the viewing
environment at this stage
BACK/
RETURN
Select “Home”
Please select your viewing environment.
Home Shop
select
set
Auto Setup is complete
If the viewing environment is set to “Shop” mode and Automatic Demo is set to “On”, the blue LED on the
front of the Display Unit and Tuner Box will light up even without an SD Card inserted. To turn off the LED,
either set Automatic Demo to “Off” or set SD Card LED to “Off” in the Setup Menu (p. 39).
To change viewing environment later on, you will need to initialise all settings by accessing Shipping
Condition and go through Auto Setup again.
“Shipping Condition” (p. 52)
Note
If tuning has failed “Auto Setup” (p. 40 and p. 41)
If you wish to tune in other satellite channels “Auto Setup” in “Other Sat. Tuning Menu” (p. 49)
To initialize all settings
“Shipping Condition” (p. 52)
If you turned the Display Unit Off during Standby mode last time, the Display Unit will be in Standby mode when
you turn it On with Mains power On / Off switch.
EXIT
TV
V
I
E
R
A
T
O
O
L
S
20
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
For “VIERA Link Control”, “Pause Live TV” and “Media Server” functions to operate correctly, ensure the
connections and settings are completed.
VIERA Link Control / Pause Live TV:
“Summary of Q-Link and VIERA Link features” (p. 72 and p. 73), “Preparations” (p. 75)
After connection, turn the equipment on and then switch the TV on.
Media Server:
“Network connections” (p. 61), “Network Setup” (p. 62)
1
Display icons of the feature
V
I
E
R
A
T
O
O
L
S
2
Select a feature
VIERA Link Control
access
select
3
Follow the operations of each feature
VIERA Link Control “VIERA Link Control” (p. 78)
When more than two pieces of compatible equipment are connected a
selection screen will be displayed.
Please select the correct description and access.
Pause Live TV “Pause Live TV” (p. 77)
Slideshow “Slideshow” (p. 69)
Slideshow will use all of the photos on the SD Card.
Photos “Photo View” (p. 68)
Movies “Movie View” (p. 70)
Media Server “Using DLNA
®
features” (p. 64)
To return to TV
EXIT
or
V
I
E
R
A
T
O
O
L
S
Note
You can change
the display type of
feature icons
“VIERA TOOLS”
(p. 39)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Panasonic TXP46Z1B Operating instructions

Category
Plasma TVs
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI