InSinkErator F-GN1100BC Dimensions Guide

Category
Faucets
Type
Dimensions Guide

This manual is also suitable for

InSinkErator F-GN1100BC is an instant hot water dispenser that provides near-boiling 200°F water. It features a graceful high-arching spout that swivels for convenience and a stylish integrated lever for a dramatic look. The hot lever automatically shuts off, providing safety and ease of use. Its durable all-brass faucet construction ensures longevity, and the We Come To You 5-Year In-Home Limited Warranty offers peace of mind.

InSinkErator F-GN1100BC is an instant hot water dispenser that provides near-boiling 200°F water. It features a graceful high-arching spout that swivels for convenience and a stylish integrated lever for a dramatic look. The hot lever automatically shuts off, providing safety and ease of use. Its durable all-brass faucet construction ensures longevity, and the We Come To You 5-Year In-Home Limited Warranty offers peace of mind.

6-1/8"
10-7/8"
6-3/4"
2 1/4"
12 1/2
"
5-1/ 4"
5-1/ 2"
8-3/4"
NOTE: Max counter thickness is 3".
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4" Incoming
Water Supply
The Next
Necessity
Submittal Sheet
Job Specifications
Specifications
Sample Specification
WDT513-16C-83-10
Hot Only – Dispenses near-boiling
200°F water
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
lever provides a dramatic look
• Hot lever automatically shuts off
• Durable all brass faucet construction
5-Year In-Home
Limited Warranty*
• For use with InSinkErator Hot Water
Tank and F-1000S Filtration System
Available in these designer finishes:
white, biscuit, French gold, satin nickel,
polished nickel, chrome, brushed chrome,
mocha bronze, oil rubbed bronze, matte
black, gloss black, classic oil-rubbed bronze
and brushed bronze
• Unit not for commercial/industrial use
Instant hot water dispenser(s) shall be
InSinkErator Model F-GN1100 with 2/3-gallon
hot water tank, adjustable temperature from
160°F to 210°F and instant, self-closing hot valve.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Valve
Shipping Weight
Instant, self-closing
Required
Hole Diameter
Approximately
1 -1/4" – 1 -1/2"
standard sink hole
4.0 lbs.
Minimum 3-1/4" required
from sink hole center
to backsplash
Printed in USA
Our finest line of instant hot water dispensers
for use with our Hot Water Tank for filtered
near-boiling 200°F water
Tank with filter sold separately (HWT-F1000S)
Instant Hot Water Dispensers
F-GN1100
Dimensions
1-800-558-5700
USA
www.insinkerator.com
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
©2016 InSinkErator, InSinkErator
®
is a business
unit of Emerson Electric Co. All Rights Reserved.
1-800-558-5700
Canada
www.insinkerator.ca
We Come To You
®
Complies with
California Lead
Plumbing Law
Certified to
NSF/ANSI 372
0.25% lead
  • Page 1 1

InSinkErator F-GN1100BC Dimensions Guide

Category
Faucets
Type
Dimensions Guide
This manual is also suitable for

InSinkErator F-GN1100BC is an instant hot water dispenser that provides near-boiling 200°F water. It features a graceful high-arching spout that swivels for convenience and a stylish integrated lever for a dramatic look. The hot lever automatically shuts off, providing safety and ease of use. Its durable all-brass faucet construction ensures longevity, and the We Come To You 5-Year In-Home Limited Warranty offers peace of mind.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI