Yamaha CVP-98 User manual

Brand: Yamaha

Model: CVP-98

Category: Musical Instruments

Type: User manual

This manual is also suitable for

Page is loading ...

Table of Contents (English)

Messages ..................................................................2

Troubleshooting..........................................................6

MIDI and Data Compatibility ......................................8

MIDI Data Format ......................................................9

MIDI Implementation Chart......................................25

Voice List..................................................................26

Drum/key Assignment List .......................................32

Style List ..................................................................34

Parameter Chart ......................................................35

Fingering Chart ........................................................36

Specifications...........................................................37

CVP-600: Assembly.................................................38

CVP-98/96: Assembly ..............................................46

Inhalt (Deutsch)

Displaymeldungen .....................................................2

Fehlersuche ...............................................................6

MIDI und Datenkompatibilität.....................................8

MIDI-Datenformat ......................................................9

MIDI-Implementierungstabelle.................................25

Stimmenverzeichnis .................................................26

Verzeichnis der Schlagzeugklänge ..........................32

Style-Verzeichnis .....................................................34

Parameterübersicht .................................................35

Akkordliste ...............................................................36

Technische Daten ....................................................37

CVP-600: Zusammenbau ........................................38

CVP-98/96: Zusammenbau .....................................46

Table des matières (Français)

Messages ..................................................................2

Dépistage des pannes ...............................................6

MIDI et la compatibilité des données .........................8

Format des données MIDI .........................................9

Feuille d’implantation MIDI.......................................25

Liste des voix ...........................................................26

Liste d’assignation instrument de batterie/touche

du clavier............................................................32

Liste des styles ........................................................34

Tableau des paramètres ..........................................35

Tablature ..................................................................36

Spécifications...........................................................37

CVP-600: Montage ..................................................38

CVP-98/96: Montage ...............................................46

Índice (Español)

Mensajes ...................................................................2

Localización y reparación de averías.........................6

MIDI y compatibilidad de datos..................................8

Formato de datos MIDI ..............................................9

Gráfico de puesta en práctica de MIDI ....................25

Lista de voces..........................................................26

Lista de asignaciones de teclas/batería...................32

Lista de estilos .........................................................34

Gráfica de parámetros .............................................35

Gráfica de digitado...................................................36

Especificationes.......................................................37

CVP-600: Montaje....................................................38

CVP-98/96: Montaje.................................................46

ENGLISH

DEUTSCH

ESPAÑOL

FRANÇAIS

CVP-98/96/600

Messages

● Common Messages

This prompt appears when there is no disk in the disk drive.

➾ Put the proper disk in the drive and attempt the operation again.

When renaming the original song or converting the data this prompt will warn you in the

event that there is no song data.

➾ Select a data-containing song, or insert a disk with song data into the floppy disk

drive.

This message appears if there is no Registration Memory, Micro Tuning, or related data

on the currently inserted disk when you attempt a file-related operation.

➾ Create a file or insert a disk with a proper file.

This message appears when a new disk or a non-Clavinova formatted disk has been

inserted into the disk drive. (See page 106 in the Owner’s Manual.)

➾ Press OK if you want to format the disk. Press CANCEL if you want to abort the

formatting process.

This message appears when you attempt to record or perform other file operations to a

disk whose write-protect tab is set to “write protect.”

➾ Set the write-protect tab to the recordable position (page 7 in the Owner’s

Manual) then try the operation again. If the operation still cannot be performed,

the disk itself has internal write protection, making it impossible to perform record-

ing or file operations on the disk.

This message appears when you attempt to record over parts or perform other operations

on files that are incompatible or do not allow such operations. Depending on the file type,

operations such as additional recording, copying, deleting, etc. may not be possible on

the CVP-98/96/600.

An error occurred while writing to (as in recording or storing files) or reading from the disk.

➾ Try the operation again after pressing the OK button. If the error occurs a second

time, the disk or the disk drive unit may be faulty. If you suspect the drive to be at

fault, refer the problem to your Yamaha dealer.

This appears for a few seconds when a time consuming operation such as format, song

copy, etc. is finished.

This message appears when data is being transfered between the Clavinova and the

disk.

➾ The message disappears automatically when the operation is finished.

When operations such as Song Delete or Format are selected, this prompts you to con-

firm whether you want to go ahead with the operation or not.

➾ Press YES to execute the operation. Press NO to return to the previous display.

The currently loaded disk is full and cannot hold any more data.

➾ Press the OK button, then delete any unnecessary data in the disk (page 138 in

the Owner’s Manual), or use a disk that has more available space. If this appears

during song recording, recording will stop and recorded data up to that point will

be saved automatically.

CVP-98/96/600

A 2DD and a 2HD disk can hold up to 60 song files each. A 2DD disk can hold about 110

files (of various types), and a 2HD disk can hold up to about 220 files.

This message appears when you try to produce more files than the disk is capable of

storing.

➾ Press the OK button, then delete any unnecessary files in the disk (page 138 in

the Owner’s Manual), or use a disk that has more available space.

A file with the same name exists.

➾ Press the OK button if you wish to overwrite the original file with new data, or

press CANCEL to abort the operation.

This message appears when you try to perform operations which cannot be done during

recording or playback, such as data conversion, etc.

➾ Stop song recording or playback, or exit from the recording/playback mode, then

perform the operation again.

This appears when you try to execute operations that cannot be performed during play-

back, such as changing the number of repeats of the Guide function.

➾ Stop song playback, or exit from the playback mode, then perform the operation

again.

A button that does not have a function in the current mode has been pressed.

This message appears when you try to execute other operations while reading data from

the disk or saving data.

➾ Wait until the data read/write operation is completed, then perform the operation

again.

This message appears when you attempt to execute another operation while writing ed-

ited data of a song recorded to internal RAM.

➾ Complete the data write operation, then perform the other operation.

This message appears when executing an operation that results in deleting data recorded

to the internal RAM, such as playback of disk software.

➾ Press YES to delete the data recorded to the internal RAM, then perform the de-

sired operation. Press the NO button if you want to keep the data.

This message appears when you attempt to record over or edit data of commercially

available software or data recorded on Clavinovas other than the CVP-94/92/98/96/600.

➾ Press YES to convert the data for recording/editing on the CVP-94/92/98/96/600.

Press NO if you don’t want to convert the data.

This message informs you of the number of times the disks must be exchanged when

copying a song to a different disk before starting the song copy operation. (See page 137

in the Owner’s Manual.)

Insert the destination disk to be copied. (See page 137 in the Owner’s Manual.)

When copying a song from the source disk to another disk, this message prompts you to

specify the song number in the destination disk to which the song is to be copied, when

the disk is first inserted. (See page 137 in the Owner’s Manual.)

● Song Copy Related Messages

Messages

CVP-98/96/600

Messages

● Custom Style Related Messages

This message appears for a few seconds when the Custom Style mode is engaged. (See

page 68 in the Owner’s Manual.)

This confirmation prompt appears when you attempt to change the beat parameter in the

Custom Style mode. (See page 70 in the Owner’s Manual.)

This confirmation prompt appears when you attempt to change the number of measures

in the Custom Style mode. (See page 70 in the Owner’s Manual.)

This confirmation prompt appears when you attempt to perform operations which can only

be done after deleting the part of the original style in the Custom Style mode. (See page

71 in the Owner’s Manual.)

This confirmation prompt appears when you attempt a store operation in the Custom

Style mode. (See page 74 in the Owner’s Manual.)

This also appears when you attempt to change styles before storing. (See page 79 in

the Owner’s Manual.)

This confirmation prompt appears when you attempt to exit from the Custom Style mode

before storing data. (See page 79 in the Owner’s Manual.)

➾

Select YES to store. Press NO to exit without storing data. Press CANCEL to return to

the previous display without storing data. (See page 79 in the Owner’s Manual.)

This message appears when the Recall Section operation in the Custom Style mode

cannot be performed, due to changes in the time signature (beat). (See page 74 in the

Owner’s Manual.)

If the data has not been stored to memory before saving to disk in the Custom Style

mode, this message prompts you to store the data before proceeding. (See page 76 in

the Owner’s Manual.)

This message appears if there is not enough internal memory space left when storing

data in the Custom Style mode. (See page 78 in the Owner’s Manual.)

This message appears when DELETE is selected from the display shown above.

➾ Select the style to be deleted and press the OK button. Press CANCEL if you do

not want to delete the style.

This message appears when memory capacity has become full during recording in the

Custom Style mode (page 78 in the Owner’s Manual). This also appears when memory

has become full during recording of a song to internal RAM. In this case, recording will

stop and data recorded up to that point will be saved automatically.

This message prompts you to insert the source disk when copying songs to a second

disk. (See page 137 in the Owner’s Manual.)

This appears when the same song number is selected for both source and destination in

the song copy operation.

➾ Change the destination song number.

CVP-98/96/600

● Recorded Data Conversion Related Messages

This message appears if a 2HD disk is used when performing conversion of the recorded data.

➾ Press OK and copy the song data to be converted to a 2DD disk, then perform the

data conversion using the disk.

Following conversion of the song data, this message displays the song number to which

the data was saved.

● Initial Data Change Related Messages

This confirmation message appears if you attempt to exit the Initial Edit function without

writing the data.

➾ Press YES to write the changed data. Press NO to exit without writing. Press

CANCEL to return to the Initial Edit display without writing.

● Chord Sequence Related Messages

This confirmation message appears if you attempt to exit the Chord Sequence function

during recording.

➾ Press YES to store the recorded data. Press NO to exit without storing. Press

CANCEL to return to the Chord Sequence display without storing.

This message appears during Chord Sequence recording when you attempt to enter an ac-

companiment style or section change at a position other than the beginning of a measure.

➾ Record changes of accompaniment style or section only at the beginning of the

measure. (See page 118 in the Owner’s Manual.)

Messages

● Style File Load Related Messages

This message appears when you attempt to load a Style file without there being enough

memory to hold the specified file. (See page 82 in the Owner’s Manual.)

Some Style Files are too large to be handled by the LISTEN feature in the Style File Load

function. (See page 81 in the Owner’s Manual.)

● Other Messages

This message appears when the host computer is not turned on, the connecting cable is not

properly connected, the HOST SELECT switch is not in the proper position, or the MIDI driver

or MIDI application is not active. In this case, turn the power off on both the Clavinova and the

computer, and check the cable connection and the position of the HOST SELECT switch. Once

the connection and HOST SELECT switch position is verified, turn the power of the computer

on first, then the Clavinova, to check if the MIDI driver and MIDI application function properly.

As long as the Clavinova is regularly used, data is retained in memory. If the instrument

is left unused for a week or longer before being turned on again, the data is erased and

this message appears. This message also appears when you recall all factory data.

(See page 147 in the Owner’s Manual.)

A problem has been detected in the hardware system during power on.

➾ Refer the problem to your Yamaha dealer.

The disk head is dirty. Clean the disk head using a commercially available head cleaning

disk.

CVP-98/96/600

Troubleshooting

Problem

The power of the Clavinova does

not turn on.

A click or pop sound is produced

when turning on/off the power.

The LCD display is too bright or

too dark to read.

The pop-up display does not open.

The keyboard sound volume is low

compared to that of the Auto Ac-

companiment or disk playback.

The sound of the Auto Accompani-

ment or disk playback is low com-

pared to that of the keyboard.

The entire sound is low or no sound

comes out.

The damper pedal has no effect, or

the sound continuously sustains

even when the damper pedal is not

pressed.

Auto Accompaniment or disk play-

back does not start.

When the keyboard is played, not

all of the notes sound.

Auto Accompaniment does not play

back.

Solution

Securely insert one of the cable

plugs into the instrument itself, and

the other plug into a proper AC

outlet.

This is normal, and is no cause for

concern.

Adjust the contrast of the display by

using the [CONTRAST] control. (See

page 15 in the Owner’s Manual.)

Press the [DISPLAY HOLD] but-

ton so that the lamp goes out. (See

page 15 in the Owner’s Manual.)

Raise the volume of the keyboard per-

formance in the Mixer display. (See

page 94 in the Owner’s Manual.)

Raise the [ACMP/SONG VOL-

UME] level.

Raise the [MASTER VOLUME].

Unplug the headphones.

Set Local Control to on. (See page

144 in the Owner’s Manual.)

Securely insert the pedal cord plug

into the proper jack. (See page 40

in this manual for the CVP-600 and

page 48 for the CVP-98/96.)

Set MIDI Sync to “INT.”. (See

page 144 in the Owner’s Manual.)

The tone generation system is

configured such that later notes

have priority, occasionally resulting

in previous notes being cut off. See

the “Specifications” section on page

37 in this Manual for information

on the simultaneous polyphonic

capacity.

Press the [ACMP ON] button to

turn on Auto Accompaniment.

Cause

The power cable plugs are not in-

serted either in the Clavinova or a

proper AC outlet.

Electrical current is flowing into the

instrument.

The brightness may be changed by

the surrounding temperature.

The [DISPLAY HOLD] lamp is lit.

The independent volume level of the

keyboard performance sound is too

low.

The [ACMP/SONG VOLUME] is

low.

The [MASTER VOLUME] is low.

Headphones are connected.

Local Control is set to off.

The pedal cord plug is not connected.

MIDI Sync is set to “EXT.”.

Notes have been played beyond the

total simultaneous polyphonic capac-

ity (maximum number of notes).

Auto Accompaniment is not turned

on.

CVP-98/96/600

The desired chord cannot be recog-

nized or output by the Auto Accom-

paniment.

The maximum of 60 songs cannot

be recorded.

Some tracks do not played back

when playing back data.

The keys are not being played cor-

rectly.

The keys are not being played ac-

cording to the selected Auto Accom-

paniment type.

The memory capacity is full because

the playing time of one or more

songs is long, or many functions

were used.

Playback of the track(s) is set to off.

Refer to the “Fingering Chart”

(page 36 in this Manual).

Check the Auto Accompaniment

type, and play the keys according to

the selected type. (See page 56 in

the Owner’s Manual.)

Delete unnecessary songs (page 138

in the Owner’s Manual) or record to

a new disk.

Set playback for the non-sounding

tracks to on. (See pages 91 and 94

in the Owner’s Manual.)

Problem SolutionCause

* If a “Hardware Error!” message appears in the display when turning on the power, con-

tact your local Yamaha dealer immediately, since this indicates some sort of internal dam-

age to the instrument.

Troubleshooting

CVP-98/96/600

MIDI and Data Compatibility

■ MIDI

MIDI (Musical Instrument Digital Interface) is a worldwide

standard communication interface that allows MIDI-compatible

musical instruments and equipment to share musical information

and control one another.

• Depending on the MIDI device, the transmittable/receivable data

differs, and only data which is commonly recognized among the

connected MIDI devices can be transmitted or received. You

can check whether your instrument supports certain data types

by referring to the MIDI Implementation Chart in the owner’s

manual for that instrument. The MIDI Implementation Chart for

the CVP-98/96/600 is found on page 25 in this Manual.

MIDI Terminals

● Sequence Format

The system which records song data is called “sequence for-

mat.”

• Playback is only possible when the sequence format of the

disk matches that of the MIDI device.

[Common Sequence Formats]

SMF (Standard MIDI File)

This is the most common sequence format.

• Standard MIDI Files are generally available as one of two

types: Format 0 or Format 1.

• Many MIDI devices are compatible with Format 0, and most

commercially available software is recorded as Format 0.

• The CVP-98/96/600 is compatible with both Format 0 and

Format 1 (for Format 1, up to a maximum of 17 chunks).

• Song data recorded on the CVP-98/96/600 is automatically

recorded as SMF Format 0.

ESEQ

This sequence format is compatible with many of Yamaha’s

MIDI devices, including the Clavinova series instruments.

This is a common format used with various Yamaha software.

• The CVP-98/96/600 is compatible with ESEQ.

● Voice Allocation Format

With MIDI, voices are assigned to specific numbers, called

“program numbers.” The numbering standard (order of voice

allocation) is referred to as the “voice allocation format.”

• Voices may not play back as expected unless the voice allo-

cation format of the song data matches that of the compat-

ible MIDI device used for playback.

[Main Voice Allocation Formats]

GM System Level 1

This is one of the most common voice allocation formats.

• Many MIDI devices are compatible with GM System Level

1, as is most commercially available software.

• The CVP-98/96/600 is compatible with GM System Level 1.

XG is a major enhancement of the GM System Level 1 format,

and was developed by Yamaha specifically to provide more

voices and variations, as well as greater expressive control over

voices and effects, and to ensure compatibility of data well into

the future.

• The CVP-98/96/600 is compatible with XG.

• Song data recorded on the CVP-98/96/600 is automatically

given XG voice allocation.

DOC

This voice allocation format is compaible with many of

Yamaha’s MIDI devices, including the Clavinova series instru-

ments.

This is also a common format used with various Yamaha soft-

ware.

• The CVP-98/96/600 is compatible with DOC.

Even if the devices and data used satisfy all the conditions

above, the data may still not be completely compatible, depend-

ing on the specifications of the devices and particular data re-

cording methods.

MIDI Cable

Connect MIDI devices with special MIDI cables.

• The various MIDI settings can be made from the Function

section’s MIDI 1 - 3 pages.

• Further information on MIDI and its applications is avail-

able in various music books and magazines.

■ Data Compatibility

This section covers basic information on data compatibility:

whether or not other MIDI devices can playback the data recorded

by CVP-98/96/600, and whether or not the CVP-98/96/600 can

playback commercially available song data or song data created for

other instruments or on a computer.

Depending on the MIDI device or data characteristics, you may

be able to play back the data without any problem, or you may have

to perform some special operations before the data can be played

back. If you run into problems playing back data, please refer to the

information below.

● Basic Check Points

The data and the MIDI device must match in regards to the

items below.

• Disk Format

• Sequence format

• Voice allocation format

● Disk format

Floppy disks are the main storage medium for data used with

various devices, including computers. Different devices have

different systems of storing data, therefore it is necessary to first

configure the floppy disk to the system of the device being used.

This operation is called “formatting.”

• There are two types of floppy disks: MF2DD (double sided,

double density) and MF2HD (double sided, high density),

and each type has different formatting systems.

• CVP-98/96/600 can record and playback with both types of

floppy disks.

• When formatted by the CVP-98/96/600, a 2DD disk stores

up to 720 KB (kilobytes) and a 2HD disk stores up to 1.44

MB (megabytes). (The figures “720 KB” and “1.44 MB”

indicate the data memory capacity. They are also used to

indicate the format type of disk.)

• Playback is only possible when the MIDI device to be used

is compatible with the format of the disk.

This terminal transmits the MIDI data.

This terminal

receives the MIDI

data.

OUT

THRU

MIDI

Data received via the

MIDI IN terminal is re-

transmitted unchanged

through this terminal.

Page is loading ...

CVP-98/96/600

(2) RECEIVE FLOW

MIDI→KEY OFF 8nH

KEY ON/OFF 9nH

CONTROL CHANGE

BANK SELECT MSB BnH,00H

BANK SELECT LSB BnH,20H

MODULATION BnH,01H

PORTAMENTO TIME BnH,05H

DATA ENTRY MSB BnH,06H

DATA ENTRY LSB BnH,26H

MAIN VOLUME BnH,07H

PANPOT BnH,0AH

EXPRESSION BnH,0BH

SUSTAIN BnH,40H

PORTAMENTO BnH,41H

SOSTENUTO BnH,42H

SOFT PEDAL BnH,43H

HARMONIC CONTENT BnH,47H

RELEASE TIME BnH,48H

ATTACK TIME BnH,49H

BRIGHTNESS BnH,4AH

PORTAMENTO CONTROL BnH,54H

REVERB SEND LEVEL BnH,5BH

CHORUS SEND LEVEL BnH,5DH

VARIATION SEND LEVEL BnH,5EH

DATA INCREMENT BnH,60H

DATA DECREMENT BnH,61H

NRPN LSB BnH,62H

NRPN MSB BnH,63H

VIBRATO RATE BnH,63H,01H,62H,08H,06H,mmH

VIBRATO DEPTH BnH,63H,01H,62H,09H,06H,mmH

VIBRATO DELAY BnH,63H,01H,62H,0AH,06H,mmH

FILTER CUTOFF FREQ. BnH,63H,01H,62H,20H,06H,mmH

FILTER RESONANCE BnH,63H,01H,62H,21H,06H,mmH

AEG ATTACK TIME BnH,63H,01H,62H,63H,06H,mmH

AEG DECAY TIME BnH,63H,01H,62H,64H,06H,mmH

AEG RELEASE BnH,63H,01H,62H,66H,06H,mmH

DRUM INST *1

CUTOFF FREQ. BnH,63H,14H,62H,rrH,06H,mmH

FILTER RESONANCE BnH,63H,15H,62H,rrH,06H,mmH

Decimal Hexadecimal Binary Decimal Hexadecimal Binary

0 00 0000 0000

1 01 0000 0001

2 02 0000 0010

3 03 0000 0011

4 04 0000 0100

5 05 0000 0101

6 06 0000 0110

7 07 0000 0111

8 08 0000 1000

9 09 0000 1001

10 0A 0000 1010

11 0B 0000 1011

12 0C 0000 1100

13 0D 0000 1101

14 0E 0000 1110

15 0F 0000 1111

16 10 0001 0000

17 11 0001 0001

18 12 0001 0010

19 13 0001 0011

20 14 0001 0100

21 15 0001 0101

22 16 0001 0110

23 17 0001 0111

24 18 0001 1000

25 19 0001 1001

26 1A 0001 1010

27 1B 0001 1011

28 1C 0001 1100

29 1D 0001 1101

30 1E 0001 1110

31 1F 0001 1111

32 20 0010 0000

33 21 0010 0001

34 22 0010 0010

35 23 0010 0011

36 24 0010 0100

37 25 0010 0101

38 26 0010 0110

39 27 0010 0111

40 28 0010 1000

41 29 0010 1001

42 2A 0010 1010

43 2B 0010 1011

44 2C 0010 1100

45 2D 0010 1101

46 2E 0010 1110

47 2F 0010 1111

48 30 0011 0000

49 31 0011 0001

50 32 0011 0010

51 33 0011 0011

52 34 0011 0100

53 35 0011 0101

54 36 0011 0110

55 37 0011 0111

56 38 0011 1000

57 39 0011 1001

58 3A 0011 1010

59 3B 0011 1011

60 3C 0011 1100

61 3D 0011 1101

62 3E 0011 1110

63 3F 0011 1111

64 40 0100 0000

65 41 0100 0001

66 42 0100 0010

67 43 0100 0011

68 44 0100 0100

69 45 0100 0101

70 46 0100 0110

71 47 0100 0111

72 48 0100 1000

73 49 0100 1001

74 4A 0100 1010

75 4B 0100 1011

76 4C 0100 1100

77 4D 0100 1101

78 4E 0100 1110

79 4F 0100 1111

80 50 0101 0000

81 51 0101 0001

82 52 0101 0010

83 53 0101 0011

84 54 0101 0100

85 55 0101 0101

86 56 0101 0110

87 57 0101 0111

88 58 0101 1000

89 59 0101 1001

90 5A 0101 1010

91 5B 0101 1011

92 5C 0101 1100

93 5D 0101 1101

94 5E 0101 1110

95 5F 0101 1111

96 60 0110 0000

97 61 0110 0001

98 62 0110 0010

99 63 0110 0011

100 64 0110 0100

101 65 0110 0101

102 66 0110 0110

103 67 0110 0111

104 68 0110 1000

105 69 0110 1001

106 6A 0110 1010

107 6B 0110 1011

108 6C 0110 1100

109 6D 0110 1101

110 6E 0110 1110

111 6F 0110 1111

112 70 0111 0000

113 71 0111 0001

114 72 0111 0010

115 73 0111 0011

116 74 0111 0100

117 75 0111 0101

118 76 0111 0110

119 77 0111 0111

120 78 0111 1000

121 79 0111 1001

122 7A 0111 1010

123 7B 0111 1011

124 7C 0111 1100

125 7D 0111 1101

126 7E 0111 1110

127 7F 0111 1111

Many MIDI messages listed in the MIDI Data Format are expressed in decimal

numbers, binary numbers and hexadecimal numbers. Hexadecimal numbers

may include the letter “H” as a suffix. Also, “n” can freely be defined as any

whole number.

To enter data/values, refer to the table below.

• Except the table above, for example 144-159(decimal)/9nH/1001 0000-1001

1111(binary) displays the Note On Message for each channel (1-16). 176-191/

BnH/1011 0000-1011 1111 displays the Control Change Message for each

channel (1-16). 192-207/CnH/1100 0000-1100 1111 displays the Program

Change Message for each channel (1-16). 240/FOH/1111 0000 denotes the

start of a System Exclusive Message. 247/F7H/1111 0111 denotes the end of

a System Exclusive Message.

• aaH (hexidecimal)/0aaaaaaa (binary) denotes the data address. The address

contains High, Mid, and Low.

• bbH/0bbbbbbb denotes the byte count.

• ccH/0ccccccc denotes the check sum.

• ddH/0ddddddd denotes the data/value.

(1) TRANSMIT FLOW

MIDI←KEY ON/OFF 9nH

OUT

CONTROL CHANGE BnH

BANK SELECT MSB BnH,00H

BANK SELECT LSB BnH,20H

DATA ENTRY MSB BnH,06H

DATA ENTRY LSB BnH,26H

MAIN VOLUME BnH,07H

PANPOT BnH,0AH

EXPRESSION BnH,0BH

SUSTAIN BnH,40H

SOSTENUTE BnH,42H

SOFT PEDAL BnH,43H

REVERB SEND LEVEL BnH,5BH

VARIATION SEND LEVEL BnH,5EH

PROGRAM CHANGE CnH

SYSTEM EXCLUSIVE MESSAGE

UNIVERSAL REALTIME F0H 7FH.....F7H

UNIVERSAL NON-REALTIME F0H 7EH.....F7H

XG PARAMETER CHANGE F0H 43H 1nH 4CH aaH aaH aaH ddH

.....ddH F7H

XG BULK DUMP F0H 43H 0nH 4CH bbH bbH aaH aaH

aaH ddH.....ddH ccH F7H

SYSTEM REALTIME MESSAGE

MIDI CLOCK F8H

START FAH

STOP FCH

ACTIVE SENSING FEH

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

CVP-98/96/600

AEG ATTACK RATE BnH,63H,16H,62H,rrH,06H,mmH

AEG DECAY RATE BnH,63H,17H,62H,rrH,06H,mmH

PITCH COARSE BnH,63H,18H,62H,rrH,06H,mmH

PITCH FINE BnH,63H,19H,62H,rrH,06H,mmH

LEVEL BnH,63H,1AH,62H,rrH,06H,mmH

PANPOT BnH,63H,1CH,62H,rrH,06H,mmH

REVERB SEND BnH,63H,1DH,62H,rrH,06H,mmH

CHORUS SEND BnH,63H,1EH,62H,rrH,06H,mmH

VARIATION SEND BnH,63H,1FH,62H,rrH,06H,mmH

RPN LSB BnH,64H

RPN MSB BnH,65H

PITCH BEND SENS. BnH,65H,00H,64H,00H,06H,mmH

FINE TUNING BnH,65H,00H,64H,01H,06H,mmH,

26H,llH

COARSE TUNING BnH,65H,00H,64H,02H,06H,mmH

NULL BnH,65H,7FH,64H,7FH

ALL SOUND OFF BnH,78H,00H

RESET ALL CONTROLLERS BnH,79H,00H

ALL NOTES OFF BnH,7BH,00H

OMNI OFF BnH,7CH,00H

OMNI ON BnH,7DH,00H

MONO BnH,7EH

POLY BnH,7FH

PROGRAM CHANGE CnH

CHANNEL AFTER TOUCH DnH

PITCH BEND CHANGE EnH

SYSTEM EXCLUSIVE MESSAGE

UNIVERSAL REALTIME F0H 7FH.....F7H

UNIVERSAL NON-REALTIME F0H 7EH.....F7H

XG PARAMETER CHANGE F0H 43H 1nH 4CH aaH aaH aaH ddH

.....ddH F7H

XG BULK DUMP F0H 43H 0nH 4CH bbH bbH aaH aaH

aaH ddH.....ddH ccH F7H

PARAMETER REQUEST F0H 43H 3nH 4CH aaH aaH aaH F7H

DUMP REQUEST F0H 43H 2nH 4CH aaH aaH aaH F7H

SYSTEM REALTIME MESSAGE

MIDI CLOCK F8H

START FAH

STOP FCH

ACTIVE SENSING FEH

* PROGRAM NUMBER: XG SFX KIT number correspondence

P = 1 SFX1 Kit

P = 2 SFX2 Kit

When DRUM VOICE is selected and program change data for a different DRUM

VOICE is received, the currently selected DRUM VOICE will be replaced with the

new DRUM VOICE.

(3-1-4) CHANNEL AFTER TOUCH (Recive only)

STATUS 1101nnnn(DnH) n = 0 - 15 VOICE CHANNEL NUMBER

VALUE 0vvvvvvv v = 0 - 127 AFTER TOUCH VALUE

(3-1-5) PITCH BEND CHANGE

STATUS 1110nnnn(EnH) n = 0 - 15 VOICE CHANNEL NUMBER

LSB 0vvvvvvv PITCH BEND CHANGE LSB

MSB 0vvvvvvv PITCH BEND CHANGE MSB

(3-1-6) CONTROL CHANGE

STATUS 1011nnnn(BnH) n = 0 - 15 VOICE CHANNEL NUMBER

CONTROL NUMBER 0ccccccc

CONTROL VALUE 0vvvvvvv

* Transmit CONTROL NUMBER.

c = 0 BANK SELECT MSB ; v = 0:XG NORMAL,

64:SFX NORMAL,

126:XG SFX KIT,

127:XG DRUM

c = 32 BANK SELECT LSB ; v = 0 - 127 *3

c = 6 DATA ENTRY MSB ; v = 0 - 127 *1

c = 38 DATA ENTRY LSB ; v = 0 - 127 *1

c = 7 MAIN VOLUME ; v = 0 - 127

c = 10 PANPOT ; v = 0 - 127

c = 11 EXPRESSION ; v = 0 - 127

c = 64 SUSTAIN ; v = 0-63:OFF , 64-127:ON *2

c = 66 SOSTENUTO ; v = 0-63:OFF , 64-127:ON *2

c = 67 SOFT PEDAL ; v = 0-63:OFF , 64-127:ON *2

c = 91 REVERB SEND LEVEL ; v = 0 - 127

c = 94

VARIATION SEND LEVEL

; v = 0 - 127

(When only Connection = 1[System])

* Receive CONTROL NUMBER.

c = 0 BANK SELECT MSB ; v = 0:XG NORMAL,

64:SFX NORMAL,

126:XG SFX KIT,

127:XG DRUM

c = 32 BANK SELECT LSB ; v = 0 - 127 *3

c = 1 MODULATION ; v = 0 - 127 *2

c = 5 PORTAMENTO TIME ; v = 0 - 127 *2

c = 6 DATA ENTRY MSB ; v = 0 - 127 *1

c = 38 DATA ENTRY LSB ; v = 0 - 127 *1

c = 7 MAIN VOLUME ; v = 0 - 127

c = 10 PANPOT ; v = 0 - 127

c = 11 EXPRESSION ; v = 0 - 127

c = 64 SUSTAIN ; v = 0-63:OFF , 64-127:ON *2

c = 65 PORTAMENTO ; v = 0-63:OFF , 64-127:ON *2

c = 66 SOSTENUTO ; v = 0-63:OFF , 64-127:ON *2

c = 67 SOFT PEDAL ; v = 0-63:OFF , 64-127:ON *2

c = 71 HARMONIC CONTENT ; v = 0:-64 - 64:0 - 127:+63 *2

c = 72 RELEASE TIME ; v = 0:-64 - 64:0 - 127:+63 *2

c = 73 ATTACK TIME ; v = 0:-64 - 64:0 - 127:+63 *2

c = 74 BRIGHTNESS ; v = 0:-64 - 64:0 - 127:+63 *2

c = 84 PORTAMENT CONTROL ; v = 0 - 127 *2

c = 91 REVERB SEND LEVEL ; v = 0 - 127

c = 93 CHORUS SEND LEVEL ; v = 0 - 127

c = 94

VARIATION SEND LEVEL

; v = 0 - 127

(When only Connection = 1[System])

c = 96 DATA INCREMENT ; v = 127 *1

c = 97 DATA DECREMENT ; v = 127 *1

*1 Only when setting the appointed parameter with RPN, NRPN.

*2 Does not effect Rhythm Voice.

*3 MSB=0, anything other than 63 is 0.

• Until a PROGRAM CHANGE message is received, the BANK SELECT

operation will be suspended. When a Voice, including VOICE BANK, is

changed, set the BANK SELECT and Program Change Message, and

transmit in the following order, BANK SELECT MSB, LSB, PROGRAM

CHANGE.

• MODULATION controls the Vibrato Depth.

• PORTAMENTO TIME controls the Pitch Change Speed when the

Portamento Switch = ON. 0 being the shortest time, and 127 being the

longest.

(3) TRANSMIT/RECEIVE DATA

(3-1) CHANNEL VOICE MESSAGES

(3-1-1) KEY OFF(Recive only)

STATUS 1000nnnn(8nH) n = 0 - 15 VOICE CHANNEL NUMBER

NOTE NUMBER 0kkkkkkk k = 0 (C-2) - 127 (G8)

VELOCITY 0vvvvvvv v: ignored

(3-1-2) KEY ON/OFF

STATUS 1001nnnn(9nH) n = 0 - 15 VOICE CHANNEL NUMBER

NOTE NUMBER 0kkkkkkk k = 0 (C-2) - 127 (G8)

VELOCITY 0vvvvvvv (v ≠ 0) NOTE ON

00000000 (v = 0) NOTE OFF

(3-1-3) PROGRAM CHANGE

STATUS 1100nnnn(CnH) n = 0 - 15 VOICE CHANNEL NUMBER

PROGRAM NUMBER 0ppppppp p = 0 - 127

* PROGRAM NUMBER: XG DRUM VOICE number correspondence

P = 0 Standard Kit

P = 1 Standard2 Kit

P = 8 Room Kit

P = 16 Rock Kit

P = 24 Elctrnic Kit

P = 25 Analog Kit

P = 27 Dance Kit

P = 32 Jazz Kit

P = 40 Brush Kit

P = 48 Classic Kit

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

CVP-98/96/600

• PANPOT changes the value for the melody voice and rhythm voice in

relation to the preset value.

• Portamento time is fixed to 0 when the PORTAMENTO CONTROL is

used.

• HARMONIC CONTENT applies adjustment to the resonance value that

is set by the voice. This parameter specifies relative change with the

value of 64 producing 0 adjustment. As values get higher the sound

becomes increasingly eccentric. Note that for some voices the effective

parameter range is narrower than the legal parameter range.

• RELEASE TIME applies adjustment to the envelope release time set by

the voice. This parameter specifies relative change with the value of 64

producing 0 adjustment.

• ATTACK TIME applies adjustment to the envelope attack time set by the

voice. This parameter specifies relative change with the value of 64

producing 0 adjustment.

• BRIGHTNESS applies adjustment to the cut-off frequency set by the

voice. This parameter specifies relative change with the value of 64

producing 0 adjustment. Lower voices produce a softer sound. For

some voices the effective parameter range is narrower than the legal

parameter range.

(3-2) CHANNEL MODE MESSAGES

STATUS 1011nnnn(BnH) n = 0 - 15 VOICE CHANNEL NUMBER

CONTROL NUMBER 0ccccccc c = CONTROL NUMBER

CONTROL VALUE 0vvvvvvv v = DATA VALUE

(3-2-1) ALL SOUND OFF (Recive only)

(CONTROL NUMBER = 78H , DATA VALUE = 0)

Switches off all sound from the channel. Does not reset Note On and Hold On

conditions established by Channel Messages.

(3-2-2) RESET ALL CONTROLLERS (Recive only)

(CONTROL NUMBER = 79H , DATA VALUE = 0)

Resets controllers as follows.

PITCH BEND CHANGE 0 (Center)

AFTER TOUCH 0 (min.)

MODULATION 0 (min.)

EXPRESSION 127 (max.)

SUSTAIN 0 (off)

SOSTENUTO 0 (off)

SOFT PEDAL 0 (off)

NRPN Sets number to null. (Internal data remains unchanged)

RPN Sets number to null. (Internal data remains unchanged)

PORTAMENT CONTROL Resets portamento source note number

PORTAMENTO 0 (off)

(3-2-3) ALL NOTES OFF (Recive only)

(CONTROL NUMBER = 7BH , DATA VALUE = 0)

Switches off all of the channel’s “on” notes. However, any notes being held by SUSTAIN

or SOSTENUTO continue to sound until SUSTAIN/SOSTENUTO goes off.

(3-2-4) OMNI OFF (Recive only)

(CONTROL NUMBER = 7CH , DATA VALUE = 0)

Same processing as for All Notes Off.

(3-2-5) OMNI ON (Recive only)

(CONTROL NUMBER = 7DH , DATA VALUE = 0)

Same processing as for All Notes Off. Omni On is not executed.

(3-2-6) MONO (Recive only)

(CONTROL NUMBER = 7EH , DATA VALUE = 0)

Same processing as for All Notes Off. If the 3rd byte is in a range of 0-16 the

corresponding channel will be changed to Mode 4 (m=1).

(3-2-7) POLY (Recive only) (CONTROL NUMBER = 7FH , DATA VALUE = 0)

Same processing as for All Sounds Off and the corresponding channel will be

changed to Mode 3.

(3-3) REGISTERED PARAMETER NUMBER(RPN)

STATUS 1011nnnn(BnH) n = 0 - 15 VOICE CHANNEL NUMBER

RPN LSB 01100100(64H)

RPN LSB NUMBER 0ppppppp p = RPN LSB(refer to the list below)

RPN MSB 01100101(65H)

RPN MSB NUMBER 0qqqqqqq q = RPN MSB(refer to the list below)

DATA ENTRY MSB 00000110(06H)

DATA VALUE 0mmmmmmm m = Data Value

DATA ENTRY LSB 00100110(26H)

DATA VALUE 0lllllll l = Data Value

First appoints the parameter for RPN MSB/LSB, then sets the parameter value for

data entry MSB/LSB.

RPN D.ENTRY

LSB MSB MSB LSB PARAMETER NAME DATA RANGE

00H 00H mmH — PITCH BEND SENSITIVITY 00H - 18H (0 - 24 semitones)

01H 00H mmH llH FINE TUNE

{mmH,llH} = {00H,00H} - {40H,00H} - {7FH,7FH}

(-8192*100/8192) - 0 - (+8192*100/8192)

02H 00H mmH — COARSE TUNE 28H - 40H - 58H (-24 - 0 - +24 semitones)

7FH 7FH — — NULL

Clears the current RPN number setting. Does not change the internal parameter settings.

(3-4) NON-REGISTERED PARAMETER NUMBER(NRPN) (Recive only)

STATUS 1011nnnn(BnH) n = 0 - 15 VOICE CHANNEL NUMBER

NRPN LSB 01100010(62H)

NRPN LSB NUMBER 0ppppppp p = NRPN LSB(refer to the list below)

NRPN MSB 01100011(63H)

NRPN MSB NUMBER 0qqqqqqq q = NRPN MSB(refer to the list below)

DATA ENTRY MSB 00000110(06H)

DATA VALUE 0mmmmmmm m = Data Value

First appoints the parameter for NRPN MSB/LSB, then sets the parameter value for data entry

MSB/LSB.

NRPN D.ENTRY

MSB LSB MSB LSB PARAMETER NAME DATA RANGE

01H 08H mmH — VIBRATO RATE 00H - 40H - 7FH (-64 - 0 - +63)

01H 09H mmH — VIBRATO DEPTH 00H - 40H - 7FH (-64 - 0 - +63)

01H 0AH mmH — VIBRATO DELAY 00H - 40H - 7FH (-64 - 0 - +63)

01H 20H mmH —

FILTER CUTOFF FREQUENCY

00H - 40H - 7FH (-64 - 0 - +63)

01H 21H mmH — FILTER RESONANCE 00H - 40H - 7FH (-64 - 0 - +63)

01H 63H mmH — EG ATTACK TIME 00H - 40H - 7FH (-64 - 0 - +63)

01H 64H mmH — EG DECAY TIME 00H - 40H - 7FH (-64 - 0 - +63)

01H 66H mmH — EG RELEASE 00H - 40H - 7FH (-64 - 0 - +63)

14H rrH mmH —

DRUM FILTER CUTOFF FREQ.

00H - 40H - 7FH (-64 - 0 - +63)

15H rrH mmH —

DRUM FILTER RESONANCE

00H - 40H - 7FH (-64 - 0 - +63)

16H rrH mmH — DRUM AEG ATTACK RATE 00H - 40H - 7FH (-64 - 0 - +63)

17H rrH mmH — DRUM AEG DECAY RATE 00H - 40H - 7FH (-64 - 0 - +63)

18H rrH mmH — DRUM PITCH COARSE 00H - 40H - 7FH (-64 - 0 - +63)

19H rrH mmH — DRUM PITCH FINE 00H - 40H - 7FH (-64 - 0 - +63)

1AH rrH mmH — DRUM LEVEL 00H - 7FH (0 - max.)

1CH rrH mmH — DRUM PANPOT 00H ,01H - 40H - 7FH

(random,left - center - right)

1DH rrH mmH —

DRUM REVERB SEND LEVEL

00H - 7FH (0 - max.)

1EH rrH mmH —

DRUM CHORUS SEND LEVEL

00H - 7FH (0 - max.)

1FH rrH mmH —

DRUM VARIATION SEND LEVEL

00H - 7FH (0 - max.)

The MSG14H-1FH (for drums) message is accepted as long as the channel is set with a drum

voice.

rrH : drum instrument note number

(3-5) SYSTEM REALTIME MESSAGES

(3-5-1) MIDI CLOCK

STATUS 11111000 (F8H)

Transmission: 96 clocks per measure are transmitted.

Reception: If the instrument’s clock is set to external, after FAH is received from the

external device the instrument’s clock will sync with the 96 beats per measure

received from the external device.

Decides whether the internal clock, or Timing Clocks received via the MIDI IN will

be used.

(3-5-2) START

STATUS 11111010 (FAH)

Transmission: Transmitted when instrument’s Rhythm or Song playback is started.

Reception: Depending upon the condition, Rhythm, Song Playback, or Song Rec will

start.

(3-5-3) STOP

STATUS 11111100 (FCH)

Transmission: Transmitted when instrument’s Rhythm or Song playback is stopped.

Reception: Depending upon the condition, Rhythm, Song Playback, or Song Rec will

stop.

(3-5-4) ACTIVE SENSING

STATUS 11111110 (FEH)

Transmission: Transmitted approximately once every 200msec.

Reception: Sensing is started once this Code is received. If Status or Data is not

received within 400ms, the MIDI Receive Buffer will be cleared, and all notes,

including those being sustained, will be cut OFF. Also, all control values will be reset

to their factory defaults.

CVP-98/96/600

(3-6) SYSTEM EXCLUSIVE MESSAGE

(3-6-1) YAMAHA MIDI FORMAT

(3-6-1-1) SECTION CONTROL

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01111110 7E Style

00000000 00

0sssssss SS Switch No.

00H : INTRO A

01H~07H : INTRO B

08H : MAIN A

09H~0FH : MAIN B

10H : FILL IN AA

11H~17H : FILL IN BB

18H : FILL IN AB

19H~1FH : FILL IN BA

20H : ENDING A

21H~27H : ENDING B

0ddddddd DD Switch On/Off: 00H(Off),7FH(On)

11110111 F7 End of Exclusive

When an ON code is received, the appointed section will be changed.

(3-6-1-2) TEMPO CONTROL

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01111110 7E Style

00000000 01

0ttttttt TT Tempo4

0ttttttt TT Tempo3

0ttttttt TT Tempo2

0ttttttt TT Tempo1

11110111 F7 End of Exclusive

The internal clock will be set to the received Tempo value.

Tempo Meta Event is a large data block (24-bit), it is divided into 4 groups with 7-bits

going into each of the Tempos 1-4 (4 receives the remaining 3 bits).

(3-6-2) UNIVERSAL SYSTEM EXCLUSIVE

(3-6-2-1) UNIVERSAL REALTIME MESSAGE

(3-6-2-1-1) MIDI MASTER VOLUME (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01111110 7F Universal Realtime

01111111 7F ID of target Device

00001001 04 Sub-ID #1=Device Control Message

00000001 01 Sub-ID #2=Master Volume

0sssssss SS Volume LSB

0ttttttt TT Volume MSB

11110111 F7 End of Exclusive

11110000 F0 Exclusive status

01111110 7F Universal Realtime

0xxxnnnn XN When N is received N=0-F, whichever is received.

When N is transmitted N always=0.

X = don’t care

00001001 04 Sub-ID #1=Device Control Message

00000001 01 Sub-ID #2=Master Volume

0sssssss SS Volume LSB

0ttttttt TT Volume MSB

11110111 F7 End of Exclusive

The volume for all channels will be changed simultaneously.

The TT value is used as the MIDI Master Volume value. (the ss value is ignored.)

(3-6-2-2) UNIVERSAL NON REALTIME MESSAGE

(3-6-2-2-1) GENERAL MIDI SYSTEM ON

binary hexadecimal

11110000 F0 Exclusive status

01111110 7E Universal Non-Realtime

01111111 7F ID of target Device

00001001 09 Sub-ID #1=General MIDI Message

00000001 01 Sub-ID #2=General MIDI On

11110111 F7 End of Exclusive

11110000 F0 Exclusive status

01111110 7E Universal Non-Realtime

0xxxnnnn XN When N is received N=0-F, whichever is received.

When N is transmitted N always=0.

X = don’t care

00001001 09 Sub-ID #1=General MIDI Message

00000001 01 Sub-ID #2=General MIDI On

11110111 F7 End of Exclusive

Depending upon the received ON message, the System Mode will be changed to XG.

Except MIDI Master Tuning, all control data be reset to default values.

This message requires approximately 50ms to execute, so sufficient time should be

allowed before the next message is sent.

(3-6-3) XG STANDARD

(3-6-3-1) XG PARAMETER CHANGE

(3-6-3-1-1) XG SYSTEM ON

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0001nnnn 1N Device Number

01001100 4C Model ID

00000000 00 Address High

00000000 00 Address Mid

01111110 7E Address Low

00000000 00 Data

11110111 F7 End of Exclusive

Depending upon the received ON message, the SYSTEM MODE will be changed to

XG.Controllers will be reset, all values of Multi Part and Effect, and All System

values denoted by “XG” data within All System will be reset to default values in the

table.

This message requires approximately 50ms to execute, so sufficient time should be

allowed before the next message is sent.

(3-6-3-1-2) XG PARMETER CHANGE

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0001nnnn 1N Device Number

01001100 4C Model ID

0aaaaaaa AA Address High

0aaaaaaa AA Address Mid

0aaaaaaa AA Address Low

0ddddddd DD Data

| |

11110111 F7 End of Exclusive

For parameters with data size of 2 or 4, transmit the appropriate number of data bytes.

For more information on Address and Parameters, refer to < Table 1-2 > (page 14) and

< Table 1-4 > ~ < Table 1-8 > (pages 15-19).

The 4 data types listed below are transmitted and received.

(These are transmitted only after a Parameter change request is received.)

XG System Data

Multi Effect Data

Multi EQ Data

Multi Part Data

Drums Setup Data

(3-6-3-2) XG BULK DUMP

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0000nnnn 0N Device Number

01001100 4C Model ID

0bbbbbbb BB ByteCount

0aaaaaaa AA Address High

0aaaaaaa AA Address Mid

0aaaaaaa AA Address Low

0ddddddd DD Data

| |

0ccccccc CC Check sum

11110111 F7 End of Exclusive

For more information on Address and Byte Count, refer to < Table 1-2 > ~ < Table 1-8 >

(pages 14-19).

The Check Sum value is set such that the sum of Byte Count, Address, Data, and

Check Sum has value zero in its seven least significant bits.

If the top of the block is appointed to the Address the XG Bulk Dump, Bulk Request

will be received.

The Block is a unit that consists of the data, arranged in the list, as the Total Size.

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

CVP-98/96/600

The 5 data types listed below are transmitted and received.

(These are transmitted only after a Bulk Dump request is received.)

System Data

Multi Effect Data(Individual effect unit)

Multi EQ Data

Multi Part Data(Individual part unit)

Drums Setup Data(Individual note unit)

System Information(Individual only)

(3-6-3-3) XG PARAMETER REQUEST (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0011nnnn 3n Device Number

01001100 4C Model ID

0aaaaaaa AA Address High

0aaaaaaa AA Address Mid

0aaaaaaa AA Address Low

11110111 F7 End of Exclusive

For more information on Address and Byte Count refer to < Table 1-2 > (page 14) and

< Table 1-4 > ~ < Table 1-8 > (pages 15-19).

The 4 data types listed below are received.

System Data

Multi Effect Data

Multi EQ Data

Multi Part Data

Drums Setup Data

(3-6-3-4) XG DUMP REQUEST (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0010nnnn 2n Device Number

01001100 4C Model ID

0aaaaaaa AA Address High

0aaaaaaa AA Address Mid

0aaaaaaa AA Address Low

11110111 F7 End of Exclusive

For more information on Address and Byte Count refer to

< Table 1-2 > ~ < Table 1-8 >

(pages 14-19).

The 5 data types listed below are received.

System Data

Multi Effect Data(Individual module unit)

Multi EQ Data

Multi Part Data(Individual part unit)

Drums Setup Data(Individual note unit)

System Information

(3-6-4) CLAVINOVA MIDI COMPLIANCE

(3-6-4-1) INTERNAL CLOCK / EXTERNAL CLOCK (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

00000001 01 Clavinova common ID

0000001n 0N N: 2(Internal Clock),3(External Clock)

11110111 F7 End of Exclusive

(3-6-4-2) DOC MULTI TIMBRE ON / OFF (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

00000001 01 Clavinova commmon ID

00000110 1N

N: 3(DOC Multi Timbre Off),4(DOC Multi Timbre On)

11110111 F7 End of Exclusive

(3-6-4-3) PANEL LED ON / OFF (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 45 CVP-98/96/600/94/92

00011010 1A PANEL LED On/Off

0mmmmmmm MM

MM: 00H(LED Off),01H(LED On),02H(The LED flashes)

03H (LED All off), 04H (Panel LED returns to

normal operation)

00000000 00

0nnnnnnn NN LED No.

11110111 F7 End of Exclusive

Remotely switches the Panel LED On/Off.

(3-6-4-4) STYLE NUMBER

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 45 CVP-98/96/600/94/92

00011101 1D Style No.

00000000 00

0ccccccc CC Style No. MSB

0ddddddd DD Style No. LSB

11110111 F7 End of Exclusive

(3-6-4-5) MIDI FA CANCEL (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 01 Clavinova common ID

01100001 61 MIDI FA Cancel

11110111 F7 End of Exclusive

If this message is received, even if FAH is received the Rhythm will not start.

(3-6-5) SPECIAL OPERATORS

(3-6-5-1) SPLIT POINT

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 01 Clavinova common ID

00010001 11 Sub ID

00000000 00

00010100 14 Split Point

0ddddddd DD Split Key No.

11110111 F7 End of Exclusive

(3-6-5-2) FINGERING

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 01 Clavinova common ID

00010001 11 Sub ID

00000000 00

01000000 40 Fingering

0000dddd 0D 0D: 00H(Off),01H(Single Finger),02H(Fingered),

04H(Full Keyboard),07H(Multi Finger)

11110111 F7 End of Exclusive

(3-6-5-3) ACCOMP VOLUME

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 01 Clavinova common ID

00010001 11 Sub ID

0000nnnn 0N Part: 00H(All Part),05H(Rhythm),0AH(Bass),

06H(Chord),0DH(Pad),07H(Phrase)

01000000 42 Accomp Volume

0ddddddd DD Volume Data: 00H~7FH

11110111 F7 End of Exclusive

(3-6-5-4) CHANNEL DETUNE

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 45 CVP-98/96/600/94/92 ID

00010001 11 Sub ID

0000nnnn 0N N = MIDI Channel

01000011 43 Dual Detune

0vvvvvvv VV Value VV: 00H - 40H - 7FH (-64 - 0 - +63)

11110111 F7 End of Exclusive

The Channel Detune message only affects the specified channel.

CVP-98/96/600

(3-6-5-5) VOLUME ,EXPRESSION AND PAN REALTIME CONTROL OFF

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 45 CVP-98/96/600/94/92 ID

00010001 11 Sub ID

0000nnnn 0N N = MIDI Channel

01001001 45 Volume and Expression Realtime Control Off

0vvvvvvv VV Value VV: off=7FH, on=00H

11110111 F7 End of Exclusive

When “On” is received, subsequent volume, expression, and PAN changes are only

valid after the reception of the next key on. Normal operation resumes when “Off” is

received.

(3-6-5-6) MIDI KEY LED MODE ON / OFF (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

01110011 73 Clavinova ID

01000101 01

00010001 11 Sub ID

0000nnnn 0N N = MIDI Channel

01000111 47 MIDI Key LED Mode On / Off

0ddddddd DD

DD: 00H(Key LED Mode Off),01H(Key LED Mode On + no tone),

02H(Key LED Mode On + tone)

11110111 F7 End of Exclusive

(3-6-6) Others

(3-6-6-1) MIDI MASTER TUNING (Recive only)

binary hexadecimal

11110000 F0 Exclusive status

01000011 43 YAMAHA ID

0001nnnn 1N When N is received N=0-F, whichever is received.

00100111 27 Model ID

00110000 30 Sub ID

00000000 00

0mmmmmmm MM Master Tune MSB

0lllllll LL Master Tune LSB

0ccccccc CC don’t care

11110111 F7 End of Exclusive

Changes tuning of all channels.

MM, LL values are used to define the MIDI Master Tuning value.

T = M-128

T : Tuning value (-99cent - +99cent)

M : A single byte value (28-228) consists of bytes 0-3 of MM = MSB, bytes 0-3 of LL = LSB.

In this setting, GM System ON, XG System ON will not be reset.

< Table 1-1>

Parmeter Basic Address

Parameter Change

Address

(H) (M) (L) Description

SYSTEM 00 00 00 System

00 00 7D Drum Setup Reset

00 00 7E XG System On

00 00 7F All Parameter Reset

INFORMATION 01 00 00 System Information

EFFECT 1 02 01 00 Effect1(Reverb,Chorus,Variation )

MULTI PART 08 00 00 Multi Part 1

08 0F 00 Multi Part 16

08 10 00 Reserved

::: :

DRUM 30 0D 00 Drum Setup 1 → Address Parameter

31 0D 00 Drum Setup 2 : :

3n 0D 00 note number 13

32 0D 00 Reserved 3n 0E 00 note number 14

::: : ::

3F nn nn Reserved 3n 5B 00 note number 91

< Table 1-2 >

MIDI Parameter Change table ( SYSTEM )

Address Size Data Parameter Name Description Default

(H) (H) (H) Value(H)

00 00 00 4 0000 Master Tune -102.4..+102.3[cent] 00 04 00 00

01 ..07FF 1st bit3-0 -> bit15-12 (0400)

02 2nd bit3-0 -> bit11-8 (With XG, GM On, it will not reset.)

03 3rd bit3-0 -> bit7-4

4th bit3-0 -> bit3-0

04 1 00..7F Master Volume 0..127 7F

05 1 Not Used

06 1 28..58 Transpose -24..+24[semitones] 40

7D n Drum Setup Reset n=Drum Setup Number

7E 00 XG System On 00=XG Sytem on

7F 00 All Parameter Reset 00=on (receive only)

TOTAL SIZE 6

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

CVP-98/96/600

< Table 1-3 >

MIDI Parameter table ( System information )

Address Size Data Parameter Name Description

(H) (H) (H)

01 00 00 E 20..7F Model Name 32..127(ASCII)

0E 1 00

0F 1 00

TOTAL SIZE 10

(Transmitted by Dump Request. Not received. Bulk Dump Only)

< Table 1-4 >

MIDI Parameter Change table ( EFFECT 1)

Address Size Data Parameter Name Description Default

(H) (H) (H) Value(H)

02 01 00 2 00..7F Reverb Type MSB Refer to the Effect Type List 01(=HALL1)

00..7F Reverb Type LSB 00 : basic type 00

02 1 00..7F Reverb Parameter 1 Refer to the Ef. Parameter List Depend on Reverb type

03 1 00..7F Reverb Parameter 2 Refer to the Ef. Parameter List Depend on Reverb type

04 1 00..7F Reverb Parameter 3 Refer to the Ef. Parameter List Depend on Reverb type

05 1 00..7F Reverb Parameter 4 Refer to the Ef. Parameter List Depend on Reverb type

06 1 00..7F Reverb Parameter 5 Refer to the Ef. Parameter List Depend on Reverb type

07 1 00..7F Reverb Parameter 6 Refer to the Ef. Parameter List Depend on Reverb type

08 1 00..7F Reverb Parameter 7 Refer to the Ef. Parameter List Depend on Reverb type

09 1 00..7F Reverb Parameter 8 Refer to the Ef. Parameter List Depend on Reverb type

0A 1 00..7F Reverb Parameter 9 Refer to the Ef. Parameter List Depend on Reverb type

0B 1 00..7F Reverb Parameter 10 Refer to the Ef. Parameter List Depend on Reverb type

0C 1 00..7F Reverb Return -∞..0..+6dB(0..96..127) 60

0D 1 01..7F Reverb Pan L63..C..R63(1..64..127) 40

TOTAL SIZE 0E

02 01 10 1 00..7F Reverb Parameter 11 Refer to the Ef. Parameter List Depend on Reverb type

11 1 00..7F Reverb Parameter 12 Refer to the Ef. Parameter List Depend on Reverb type

12 1 00..7F Reverb Parameter 13 Refer to the Ef. Parameter List Depend on Reverb type

13 1 00..7F Reverb Parameter 14 Refer to the Ef. Parameter List Depend on Reverb type

14 1 00..7F Reverb Parameter 15 Refer to the Ef. Parameter List Depend on Reverb type

15 1 00..7F Reverb Parameter 16 Refer to the Ef. Parameter List Depend on Reverb type

TOTAL SIZE 6

02 01 20 2 00..7F Chorus Type MSB Refer to the Effect Type List 41(=Chorus1)

00..7F Chorus Type LSB 00 : basic type 00

22 1 00..7F Chorus Parameter 1 Refer to the Ef. Parameter List Depend on Chorus Type

23 1 00..7F Chorus Parameter 2 Refer to the Ef. Parameter List Depend on Chorus Type

24 1 00..7F Chorus Parameter 3 Refer to the Ef. Parameter List Depend on Chorus Type

25 1 00..7F Chorus Parameter 4 Refer to the Ef. Parameter List Depend on Chorus Type

26 1 00..7F Chorus Parameter 5 Refer to the Ef. Parameter List Depend on Chorus Type

27 1 00..7F Chorus Parameter 6 Refer to the Ef. Parameter List Depend on Chorus Type

28 1 00..7F Chorus Parameter 7 Refer to the Ef. Parameter List Depend on Chorus Type

29 1 00..7F Chorus Parameter 8 Refer to the Ef. Parameter List Depend on Chorus Type

2A 1 00..7F Chorus Parameter 9 Refer to the Ef. Parameter List Depend on Chorus Type

2B 1 00..7F Chorus Parameter 10 Refer to the Ef. Parameter List Depend on Chorus Type

2C 1 00..7F Chorus Return -∞..0..+6dB(0..96..127) 60

2D 1 01..7F Chorus Pan L63..C..R63(1..64..127) 40

2E 1 00..7F Send Chorus To Reverb -∞..0..+6dB(0..96..127) 00

TOTAL SIZE 0F

02 01 30 1 00..7F Chorus Parameter 11 Refer to the Ef. Parameter List Depend on Chorus Type

31 1 00..7F Chorus Parameter 12 Refer to the Ef. Parameter List Depend on Chorus Type

32 1 00..7F Chorus Parameter 13 Refer to the Ef. Parameter List Depend on Chorus Type

33 1 00..7F Chorus Parameter 14 Refer to the Ef. Parameter List Depend on Chorus Type

34 1 00..7F Chorus Parameter 15 Refer to the Ef. Parameter List Depend on Chorus Type

35 1 00..7F Chorus Parameter 16 Refer to the Ef. Parameter List Depend on Chorus Type

TOTAL SIZE 6

02 01 40 2 00..7F Variation Type MSB Refer to the Effect Type List “05(=DELAY L,C,R)”

00..7F Variation Type LSB 00 : basic type 00

42 2 00..7F Vari. Param. 1 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 1 LSB Refer to the Ef. Parameter List Depend on Vari. Type

44 2 00..7F Vari. Param. 2 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 2 LSB Refer to the Ef. Parameter List Depend on Vari. Type

46 2 00..7F Vari. Param. 3 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 3 LSB Refer to the Ef. Parameter List Depend on Vari. Type

48 2 00..7F Vari. Param. 4 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 4 LSB Refer to the Ef. Parameter List Depend on Vari. Type

CVP-98/96/600

4A 2 00..7F Vari. Param. 5 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 5 LSB Refer to the Ef. Parameter List Depend on Vari. Type

4C 2 00..7F Vari. Param. 6 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 6 LSB Refer to the Ef. Parameter List Depend on Vari. Type

4E 2 00..7F Vari. Param. 7 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 7 LSB Refer to the Ef. Parameter List Depend on Vari. Type

50 2 00..7F Vari. Param. 8 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 8 LSB Refer to the Ef. Parameter List Depend on Vari. Type

52 2 00..7F Vari. Param. 9 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 9 LSB Refer to the Ef. Parameter List Depend on Vari. Type

54 2 00..7F Vari. Param. 10 MSB Refer to the Ef. Parameter List Depend on Vari. Type

00..7F Vari. Param. 10 LSB Refer to the Ef. Parameter List Depend on Vari. Type

56 1 00..7F Variation Return -∞..0..+6dB(0..96..127) 60

57 1 01..7F Variation Pan L63..C..R63(1..64..127) 40

58 1 00..7F Send Vari. To Reverb -∞..0..+6dB(0..96..127) 00

59 1 00..7F Send Vari. To Chorus -∞..0..+6dB(0..96..127) 00

5A 1 00..01 Variation Connection 0:insertion,1:system 00

5B 1 00..1F Variation Part part1..32(0..31),off(127) 7F

5C 1 01..7F MW Vari. Ctrl Depth -63..+63 40

5D 1 01..7F PB Vari. Ctrl Depth -63..+63 40

5E 1 01..7F CAT Vari. Ctrl Depth -63..+63 40

5F 1 01..7F Not Used

60 1 01..7F Not Used

TOTAL SIZE 21

02 01 70 1 00..7F Variation Parameter 11 option Parameter Depend on Variation Type

71 1 00..7F Variation Parameter 12 option Parameter Depend on Variation Type

72 1 00..7F Variation Parameter 13 option Parameter Depend on Variation Type

73 1 00..7F Variation Parameter 14 option Parameter Depend on Variation Type

74 1 00..7F Variation Parameter 15 option Parameter Depend on Variation Type

75 1 00..7F Variation Parameter 16 option Parameter Depend on Variation Type

TOTAL SIZE 6

< Table 1-5 >

MIDI Parameter Change table ( MULTI EQ )

Address Size Data Parameter Name Description Default

(H) (H) (H) Value(H)

02 40 00 1 34..4C EQ Type 0:FLAT 0

1:JAZZ

2:POPS

3:ROCK

4:CLASSIC

01 1 34..4C EQ Gain1 -12..+12[dB] 40

02 1 04..28 EQ Frequency1 32..2000[Hz] 0C

03 1 01..78 EQ Q1 0.1..12.0 07

04 1 00..01 EQ Shape1 00:Shelving,01:Peaking 00

05 1 34..4C EQ Gain2 -12..+12[dB] 40

06 1 0E..36 EQ Frequency2 0.1..10[KHz] 1C

07 1 01..78 EQ Q2 0.1..12.0 07

08 1 Not Used

09 1 34..4C EQ Gain3 -12..+12[dB] 40

0A 1 0E..36 EQ Frequency3 0.1..10[KHz] 22

0B 1 01..78 EQ Q3 0.1..12.0 07

0C 1 Not Used

0D 1 34..4C EQ Gain4 -12..+12[dB] 40

0E 1 0E..36 EQ Frequency4 0.1..10[KHz] 2E

0F 1 01..78 EQ Q4 0.1..12.0 07

10 1 Not Used

11 1 34..4C EQ Gain5 -12..+12[dB] 40

12 1 1C..3A EQ Frequency5 0.5..16.0[KHz] 3C

13 1 01..78 EQ Q5 0.1..12.0 07

14 1 00..01 EQ Shape5 00:Shelving,01:Peaking 00

TOTAL SIZE 15

< Table 1-6 >

MIDI Parameter Change table ( EFFECT 2 )

Address Size Data Parameter Name Description Default

(H) (H) (H) Value(H)

03 00 00 2 00..7F Insertion Type MSB Refer to the Ef. Type List “49(=DISTORTION)”

00..7F Insertion Type LSB 00 : basic type 00

02 1 00..7F Insertion Parameter1 Refer to the Ef. Parameter List Depend on Ins. Type

03 1 00..7F Insertion Parameter2 Refer to the Ef. Parameter List Depend on Ins. Type

04 1 00..7F Insertion Parameter3 Refer to the Ef. Parameter List Depend on Ins. Type

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

CVP-98/96/600

05 1 00..7F Insertion Parameter4 Refer to the Ef. Parameter List Depend on Ins. Type

06 1 00..7F Insertion Parameter5 Refer to the Ef. Parameter List Depend on Ins. Type

07 1 00..7F Insertion Parameter6 Refer to the Ef. Parameter List Depend on Ins. Type

08 1 00..7F Insertion Parameter7 Refer to the Ef. Parameter List Depend on Ins. Type

09 1 00..7F Insertion Parameter8 Refer to the Ef. Parameter List Depend on Ins. Type

0A 1 00..7F Insertion Parameter9 Refer to the Ef. Parameter List Depend on Ins. Type

0B 1 00..7F Insertion Parameter10 Refer to the Ef. Parameter List Depend on Ins. Type

0C 1 00..7F Insertion Part Part1..16,OFF 7F

0D 1 00..7F MW INS CTRL DPT

0E 1 00..7F BEND INS CTRL DPT

0F 1 00..7F CAT INS CTRL DPT

10 1 00..7F Not Used

11 1 00..7F Not Used

TOTAL SIZE 12

03 00 20 1 00..7F Insertion Parameter11 Refer to the Ef. Parameter List Depend on Ins. Type

21 1 00..7F Insertion Parameter12 Refer to the Ef. Parameter List Depend on Ins. Type

22 1 00..7F Insertion Parameter13 Refer to the Ef. Parameter List Depend on Ins. Type

23 1 00..7F Insertion Parameter14 Refer to the Ef. Parameter List Depend on Ins. Type

24 1 00..7F Insertion Parameter15 Refer to the Ef. Parameter List Depend on Ins. Type

25 1 00..7F Insertion Parameter16 Refer to the Ef. Parameter List Depend on Ins. Type

TOTAL SIZE 06

03 00 30 2 00..7F Ins. Param.1 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.1 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 32 2 00..7F Ins. Param.2 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.2 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 34 2 00..7F Ins. Param.3 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.3 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 36 2 00..7F Ins. Param.4 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.4 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 38 2 00..7F Ins. Param.5 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.5 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 3A 2 00..7F Ins. Param.6 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.6 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 3C 2 00..7F Ins. Param.7 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.7 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 3E 2 00..7F Ins. Param.8 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.8 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 40 2 00..7F Ins. Param.9 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.9 LSB Refer to the Ef. Parameter List Depend on Ins. Type

03 00 42 2 00..7F Ins. Param.10 MSB Refer to the Ef. Parameter List Depend on Ins. Type

00..7F Ins. Param.10 LSB Refer to the Ef. Parameter List Depend on Ins. Type

TOTAL SIZE 14

For effect types that do not require MSB, the Parameters for Address 02-0B will be received. Address 30-42 will not be received.

For effect types that require MSB, the Parameters for Address 30-42 will be received. Address 02-0B will not be received.

When Bulk Dumps that include Effect Type data are transmitted, the Parameters for Address 02 - 0B will always be transmitted. But, effects that require MSB, when the bulk dump is

received the Parameters for Address 02 - 0B will not be received.

< Table 1-7 >

MIDI Parameter Change table ( MULTI PART )

Address Size Data Parameter Name Description Default

(H) (H) (H) Value(H)

08 nn 00 1 00..20 Element Reserve 0..32 0(Part10),2(Others)

nn 01 1 00..7F Bank Select MSB 0..127 7F(Part10),00(Others)

nn 02 1 00..7F Bank Select LSB 0..127 00

nn 03 1 00..7F Program Number 1..128 00

nn 04 1 00..0F, Rcv Channel 0..16;1..16,127;off Part No.

nn 05 1 00..01 Mono/Poly Mode 0:mono,1:poly 01

nn 06 1 00..02 Same Note Number 0:single 00

Key On Assign 1:multi

2:inst (for DRUM)

nn 07 1 00..02 Part Mode 0:normal 00 (Except Part10)

1..3:drum thru,drum1..2 01 (Part10)

nn 08 1 28..58 Note Shift -24..+24[semitones] 40

nn 09 2 00..FF Detune -12.8..+12.7[Hz] 08 00

nn 0A 1st bit3..0 -> bit7..4 (80)

2nd bit3..0 -> bit3..0

nn 0B 1 00..7F Volume 0..127 64

nn 0C 1 00..7F Velocity Sense Depth 0..127 40

nn 0D 1 00..7F Velocity Sense Offset 0..127 40

nn 0E 1 00..7F Pan 0:random 40

L63..C..R63(1..64..127)

CVP-98/96/600

nn 0F 1 00..7F Note Limit Low C-2..G8 00

nn 10 1 00..7F Note Limit High C-2..G8 7F

nn 11 1 00..7F Dry Level 0..127 7F

nn 12 1 00..7F Chorus Send 0..127 00

nn 13 1 00..7F Reverb Send 0..127 28

nn 14 1 00..7F Variation Send 0..127 00

nn 15 1 00..7F Vibrato Rate -64..+63 40

nn 16 1 00..7F Vibrato Depth -64..+63 40

nn 17 1 00..7F Vibrato Delay -64..+63 40

nn 18 1 00..7F Filter Cutoff Freq. -64..+63 40

nn 19 1 00..7F Filter Resonance -64..+63 40

nn 1A 1 00..7F EG Attack Time -64..+63 40

nn 1B 1 00..7F EG Decay Time -64..+63 40

nn 1C 1 00..7F EG Release Time -64..+63 40

nn 1D 1 28..58 MW Pitch Control -24..+24[semitones] 40

nn 1E 1 00..7F MW Filter Control -9600..+9450[cent] 40

nn 1F 1 00..7F MW Amp. Control -100..+100[%] 40

nn 20 1 00..7F MW LFO PMod Depth 0..127 0A

nn 21 1 00..7F MW LFO FMod Depth 0..127 00

nn 22 1 00..7F MW LFO AMod Depth 0..127 00

nn 23 1 28..58 Bend Pitch Control -24..+24[semitones] 42

nn 24 1 00..7F Bend Filter Control -9600..+9450[cent] 40

nn 25 1 00..7F Bend Amp. Control -100..+100[%] 40

nn 26 1 00..7F Bend LFO PMod Depth 0..127 00

nn 27 1 00..7F Bend LFO FMod Depth 0..127 00

nn 28 1 00..7F Bend LFO AMod Depth 0..127 00

TOTAL SIZE 29

nn 30 Not Used

nn 40 Not Used

nn 41 1 00..7F Scale Tuning C -64..+63[cent] 40

nn 42 1 00..7F Scale Tuning C# -64..+63[cent] 40

nn 43 1 00..7F Scale Tuning D -64..+63[cent] 40

nn 44 1 00..7F Scale Tuning D# -64..+63[cent] 40

nn 45 1 00..7F Scale Tuning E -64..+63[cent] 40

nn 46 1 00..7F Scale Tuning F -64..+63[cent] 40

nn 47 1 00..7F Scale Tuning F# -64..+63[cent] 40

nn 48 1 00..7F Scale Tuning G -64..+63[cent] 40

nn 49 1 00..7F Scale Tuning G# -64..+63[cent] 40

nn 4A 1 00..7F Scale Tuning A -64..+63[cent] 40

nn 4B 1 00..7F Scale Tuning A# -64..+63[cent] 40

nn 4C 1 00..7F Scale Tuning B -64..+63[cent] 40

nn 4D 1 28..58 CAT Pitch Control -24..+24[semitones] 40

nn 4E 1 00..7F CAT Filter Control -9600..+9450[cent] 40

nn 4F 1 00..7F CAT Amplitude Control -100..+100[%] 40

nn 50 1 00..7F CAT LFO PMod Depth 0..127 00

nn 51 1 00..7F CAT LFO FMod Depth 0..127 00

nn 52 1 00..7F CAT LFO AMod Depth 0..127 00

nn 53 Not Used

66 Not Used

nn 67 1 00..01 Portamento Switch off/on 00

nn 68 1 00..7F Portamento Time 0..127 00

nn 69 Not Used

6E Not Used

TOTAL SIZE 3F

nn = PartNumber

If there is a Drum Voice assigned to the Part, the following parameters are ineffective.

• Bank Select LSB

• Amp EG

• Portamento

• Soft Pedal

• Mono/Poly

• Scale Tuning

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

CVP-98/96/600

XG ESSENTIAL EFFECT

Same as LSB=0

XG OPTION EFFECT

REVERB TYPE

* If the received value does not contain an effect type in the TYPE LSB, The LSB will be directed to TYPE 0.

* Panel Effects are based on the “[Number] Effect Name”.

CHORUS TYPE

MIDI Parameter Change table ( DRUM SETUP )

Address Size Data Parameter Name Description Default

(H) (H) (H) Value(H)

3n rr 00 1 00..7F Pitch Coarse -64..+63 40

3n rr 01 1 00..7F Pitch Fine -64..+63[cent] 40

3n rr 02 1 00..7F Level 0..127 Depend on the Note

3n rr 03 1 00..7F Alternate Group 0:off,1..127 Depend on the Note

3n rr 04 1 00..7F Pan 0:random Depend on the Note

L63..C..R63(1..64..127)

3n rr 05 1 00..7F Reverb Send Level 0..127 Depend on the Note

3n rr 06 1 00..7F Chorus Send Level 0..127 Depend on the Note

3n rr 07 1 00..7F Variation Send Level 0..127 7F

3n rr 08 1 00..01 Key Assign 0:single,1:multi 00

3n rr 09 1 00..01 Rcv Note Off off/on Depend on the Note

3n rr 0A 1 00..01 Rcv Note On off/on 01

3n rr 0B 1 00..7F Filter Cutoff Freq. -64..63 40

3n rr 0C 1 00..7F Filter Resonance -64..63 40

3n rr 0D 1 00..7F EG Attack Rate -64..63 40

3n rr 0E 1 00..7F EG Decay1 Rate -64..63 40

3n rr 0F 1 00..7F EG Decay2 Rate -64..63 40

TOTAL SIZE 10

n:Drum Setup Number(0 - 1)

rr:note number(0DH - 54H)

If XG SYSTEM ON and/or GM On message is received, all Drum Setup Parameter will be reset to default values.

According to the Drum Setup Reset message, individual Drum Setup Parameters can be reset to default values.

< Table 1-9 > Effect Type List

TYPE TYPE LSB

MSB 00 01 02 03..07 08 09..15 16 17 18 19 20 21..

000 NO EFFECT

001 [1]HALL1 [2]HALL2 [3]HALL3 [4]HALL4 [5]HALL5

002 [6]ROOM1 ROOM2 [7]ROOM2 [8]ROOM3 ROOM ROOM [9]ROOM4

003 [10]STAGE1 [11]STAGE2 STAGE [12]STAGE3

004 [13]PLATE PLATE PLATE

005..015 NO EFFECT

016 [14]WHITE ROOM

017 [15]TUNNEL

018 CANYON

019 [16]BASEMENT

020..127 NO EFFECT

TYPE TYPE LSB

MSB 00 01 02 03..07 08 09..15 16 17 18 19 20 21..

000 NO EFFECT

001..064 NO EFFECT

065 CHORUS1 CHORUS2 CHORUS3 CHORUS4

066 CELESTE1 CELESTE2 CELESTE3 CELESTE4 CELESTE CELESTE

067 FLANGER 1 FLANGER2 FLANGER3 FLANGER FLANGER

068 SYMPHONIC

069..071 NO EFFECT

072 PHASER 1

073..086 NO EFFECT

087

ENSEMBLE DETUNE

088..127 NO EFFECT

CVP-98/96/600

VARIATION EFFECT TYPE

TYPE TYPE LSB

MSB 00 01 02 03..07 08 09..15 16 17 18 19 20 21..

000 NO EFFECT

001 [1]HALL1 [2]HALL2 [3]HALL3 HALL HALL

002 [4]ROOM1 ROOM2 [5]ROOM2 [6]ROOM3 ROOM ROOM ROOM

003 [7]STAGE1 [8]STAGE2 STAGE [9]STAGE3

004 PLATE PLATE PLATE

005 DELAY L,C,R [17]DELAY LCR

006 [18]DELAY L,R

007 [19]ECHO

008 [20]CROSS DELAY

009 ER1 ER2

010 GATE REVERB

011 REVERS GATE

012..015 NO EFFECT

016 WHITE ROOM

017 TUNNEL

018 CANYON

019 BASEMENT

020 KARAOKE 1 KARAOKE 2 KARAOKE 3

021..063 NO EFFECT

064 THRU

065 CHORUS1 CHORUS2 CHORUS CHORUS

066 [13]CELESTE [12]CHORUS3 CELESTE3 [11]CHORUS2 CHORUS [10]CHORUS1 [22] [23]ROTARY

067 FLANGER 1 FLANGER FLANGER [14]FLANGER FLANGER

068 SYMPHONIC [15]SYMPHONIC

069 ROTARY SP. Rotary Sp

070 TREMOLO [21]TREMOLO Rotary Sp

071 AUTO PAN [16]AUTO PAN Rotary Sp Rotary Sp Tremolo Gtr Tremolo

072 [24]PHASER PHASER

073 DISTORTION COMP+DISTORTION

074 OVER DRIVE

075 AMP SIM. DIST.HARD DIST.SOFT

076 3BAND EQ EQ DISCO EQ TEL

077 2BAND EQ

078 AUTO WAH AUTO WAH+DIST AUTO WAH+ [25]WAH

OVERDRIVE

079 THRU

080 PITCH CHANGE PITCH CHANGE2

081 THRU

082 TOUCH WAH 1 TOUCH WAH+DIST TOUCH WAH+ TOUCH WAH 2

OVERDRIVE

083 COMPRESSOR

084 NOISE GATE

085 VOICE CANCEL

086 2WAY ROTARY SP

087

ENSEMBLE DETUNE

088 AMBIENCE

089..127 THRU

INSERTION EFFECT TYPE

TYPE TYPE LSB

MSB 00 01 02 03..07 08 09..15 16 17 18 19 20 21..

000 THRU

001 HALL 1 HALL 2 HALL HALL HALL

002 ROOM 1 ROOM 2 ROOM 3 ROOM ROOM ROOM ROOM

003 STAGE 1 STAGE 2 STAGE STAGE

004 PLATE PLATE PLATE

005 DELAY L,C,R Delay LCR

006 DELAY L,R

007 ECHO

008 CROSS DELAY

009..019 THRU

020 KARAOKE 1 KARAOKE 2 KARAOKE 3

021..064 THRU

065 CHORUS 1 CHORUS 2 CHORUS 3 CHORUS 4

066 CELESTE 1 CELESTE 2 CELESTE 3 CELESTE 4 CHORUS CHORUS Rotary Sp

067 FLANGER 1 FLANGER 2 FLANGER 3 FLANGER FLANGER

068 SYMPHONIC Symphonic

069

ROTARY SPEAKER 1

Rotary Sp

070 TREMOLO Tremolo Rotary Sp

071 AUTO PAN AutoPan Rotary Sp Rotary Sp Tremolo Gtr Tremolo

072 PHASER 1

073 DISTORTION

074 OVER DRIVE

075 AMP SIMULATOR DIST.HARD DIST.SOFT

076 3BAND EQ EQ DISCO EQ TEL

077 2-BAND EQ

078 AUTO WAH(LFO) Auto Wah

079..081 THRU

082 TOUCH WAH 1 TOUCH WAH 2

083 COMPRESSOR

084 NOISE GATE

085..086 THRU

087

ENSEMBLE DETUNE

088..127 THRU

MIDI Data Format

MIDI-Datenformat

Format des données MIDI

Formato de datos MIDI

Page is loading ...

Yamaha CVP-98 User manual

Brand: Yamaha

Model: CVP-98

Category: Musical Instruments

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

italiano: Yamaha CVP-98 Manuale utente
français: Yamaha CVP-98 Manuel utilisateur
español: Yamaha CVP-98 Manual de usuario
Deutsch: Yamaha CVP-98 Benutzerhandbuch
русский: Yamaha CVP-98 Руководство пользователя
Nederlands: Yamaha CVP-98 Handleiding
português: Yamaha CVP-98 Manual do usuário
dansk: Yamaha CVP-98 Brugermanual
polski: Yamaha CVP-98 Instrukcja obsługi
čeština: Yamaha CVP-98 Uživatelský manuál
Türkçe: Yamaha CVP-98 Kullanım kılavuzu
svenska: Yamaha CVP-98 Användarmanual
suomi: Yamaha CVP-98 Ohjekirja
română: Yamaha CVP-98 Manual de utilizare

Yamaha CVP-98 User manual

This manual is also suitable for

Yamaha CVP-98 User manual

in other languages

Related papers

Other documents