1. POWER ON
Turn the power switch from OFF to ON. The blue LED will turn
on and then start ashing.
2. PAIR
Follow your smartphone’s Bluetooth pairing steps to pair with
‘HE150121’. The blue LED will turn off once successfully paired.
3. CAMERA MODE
Put your smartphone into camera mode.
4. SAY CHEESE!
Press the iOS or Android camera button to take a photo or
video.
NOTE: If you have trouble taking photos or videos on an Android device,
download the Camera 360 app from the Play Store. Once installed,
press the ‘Camera 360’ button to take a photo
NOTE: Remote takes battery type CR2032 3V. Replacing the battery should always be performed by
an adult.
1. INSERT
Using the pull tab, insert your smartphone into the sele stick
clip.
2. SECURE
Angle the mobile as desired and ensure the mobile is secured
rmly and will not fall out.
3. EXTEND
Pull the ends of your sele stick to extend to the desired length.
4. CAMERA MODE
Put your smartphone into camera mode.
5. SMILE!
Aim with your mobile and press your Bluetooth Remote Button
to take a photo or video.
NOTE: The Sele Stick is designed for use with a mobile phone only.
HE150121
12/2015
Getting Started Guide
SELFIE STICK
WITH TRIPOD
BLUETOOTH REMOTE
SELFIE STICK
1
2
3
4
OFF ON