Letscom F-531 User manual

Brand: Letscom

Model: F-531

Type: User manual

Letscom F-531 brings you exceptional lighting solutions for all your photography and videography needs. With its adjustable brightness levels and three lighting modes (warm, natural, and white), you can create the perfect ambiance for any occasion. The flexible phone holder and 360-degree ball heads allow for precise positioning of your smartphone, ensuring the best angles for your shots.

F-531

User Manual

Thank you for purchasing our

product. This manual addresses

the safety guidelines, warranty,

and operating instructions. Please

review this manual thoroughly

before operating your device.

Ring Fill Light

Package Contents................................................................

At a Glance..........................................................................

Installation Guide.................................................................

Using Your Ring Fill Light...................................................

Specifications......................................................................

SAFETY AND WARRANTY.................................................

Contents

Package Contents

Flexible Phone Holder × 1

Phone Holder × 1

Selfie Remote Control × 1

User Manual × 1

Ring Fill Light × 1

Tripod Stand × 1

Ball Head A × 1

Ball Head B × 1

F-531

User Manual

Thank you for purchasing our

product. This manual addresses

the safety guidelines, warranty,

and operating instructions. Please

review this manual thoroughly

before operating your device.

Ring Fill Light

At a Glance

USB Connector

LED Panel

Light Controller

Screw Hole

1. Ring Fill Light

2. Tripod Stand

Screw

Ball Head Fastener

360°Ball Head

Screw

3. Ball Head A

4. Ball Head B

360° Ball Head

Ball Head Fastener

Screw Hole

Screw

5. Flexible Phone Holder

6. Phone Holder

Phone Holder

Flexible Tube

Screw

Screw Hole

Installation Guide

Installing Ring Fill Light

1. Screw ball head A into the

screw hole on the tripod stand.

2. While holding the ring fill light

in one hand, screw ball head A

into the bottom of the light.

3. Pull out the three legs

of the tripod stand and

place it on your desk.

4. Loosen the fastener of ball

head A, adjust the ring fill

light to your desired angle,

and then tighten the

fastener.

Note:

Please extend the three legs of the tripod stand as much as

possible to ensure its stability.

Installing Phone Holder

1. Screw ball head B into the screw hole on the ring fill light and

then screw the phone holder into ball head B.

2. Loosen the fastener of ball

head B, adjust the phone

holder to your desired angle,

and then tighten the fastener.

Screw the flexible phone holder into

the screw hole on the ring fill light.

You can also install your phone on the stand using the flexible

phone holder.

Up to 3.7 inches

Up to 3.6 inches

Extendable Phone Holders

End Result

15.5 inches

Increase Brightness

Change Lighting Mode

Decrease Brightness

Power Button

Note:

Our ring fill light has mode memory. When turned on, it will be set to

the last used mode (When you disconnect the power, it will be reset

to factory settings).

On/off

Model

Down

Using Your Ring Fill Light

Power on

Adjust Brightness & Change Lighting Mode

After mounting the ring fill light on the tripod stand, connect the USB

connector of the ring fill light to a USB wall charger or computer USB

port that is powered on (5V / 2A).

Press the power button to turn the light on, press the up / down button to

increase / decrease the brightness (10 levels). Press the mode button to

change lighting mode (white / natural / warm).

1) Turn on the Bluetooth of your phone.

2) Slide the power switch to ON. The remote control will enter pairing

mode (the LED indicator will flash blue).

3) Choose "AB Shutter3" from the list of found Bluetooth devices on

your phone to pair.

● Pair

Use Selfie Remote Control

Battery Cover

Button A

(Shutter for iPhones)

Button B

(Shutter for Android Phones)

Power Switch

LED Indicator

● Select App

You can use the built-in camera app of your phone to take photos with

our selfie remote control or you can download "Camera 360" app from

Google Play store. Please check the Compatible Devices table for

compatible devices and apps.

● Take a Photo / Start Recording

When our selfie remote control is successfully paired with your phone,

open the camera app, press Button A or Button B on the remote control

depending on your phone type to take a photo / start recording.

Note

When the selfie remote control is connected to your phone, you may

encounter text input problem, please go to your smartphone "Settings"

→ "System" → "Keyboard & Input Method" and select system default

input method.

Compatible Devices

Compatible with iOS 6.0 OS or

newer (e.g, iPhone 11/11

Pro/11 Pro Max, iPhone XS/XS

Max, iPhone XR, iPhone X,

iPhone8/8P, iPhone7/7P,

iPhone6/6S/6P/6SP,

iPhoneSE, iPhone 5S/5C/5,

iPhone 4S/4, iPad 3/2, iPad

mini, iPad with Retina Display,

iPod touch 4th).

Compatible with Android 4.2.2

OS or newer (e.g., Samsung

Galaxy S2/S3/S4/S10/S20

5G/S20 Ultra 5G, Samsung

Galaxy Note 1/2/3/8/9/10,

Moto X, Nexus 4/5/7+, Xiaomi

1S/2S/3+)

Sony Xperia S

HTC New one and X+

Built-in

Camera App

Camera 360 App

iOS

android

Not Applicable

Specifications

F-531

ABS+PC

10.2 inches / 0.26 meters (outer diameter)

8.1 inches / 0.21 meters (inner diameter)

White / Natural / Warm

3000K to 6000K

10 levels

1100 to 2200 lm

120

USB

5V / 2A

10W

10 feet / 3 meters

Model

Material

Ring Diameter

Lighting Mode

Color Temperature

Adjustable Brightness

Lumens

Number of LED Bulbs

Power Supply Mode

Input Power

Output Power

Power Cord Length

Specifications (Ring Fill Light)

AB Shutter3

V4.0

33 feet / 10 meters

CR2032

Approximately 6 months

(average use of 10 times a day)

Model

Bluetooth Version

Bluetooth Connection

Distance

Battery Type

Battery Life

Specifications (Selfie Remote Control)

SAFETY AND WARRANTY

● This product must be used with an input power of 5V / 2A, and low

power input will reduce the brightness of the ring fill light.

● Do NOT try to dismantle or modify the product.

● Keep this product away from water and any flammable gases or liquids.

● Do NOT repair the product in dangerous places such as gas, steam,

etc. It is easy to conduct electricity in a humid environment.

● Do not let any liquid flow into the product, as this may seriously damage

the product.

● Do NOT use the product in the environment where the room

temperature is lower than 0°C (32°F) or higher than 45°C (113°F).

● Clean the product only with a dry, soft cotton cloth or equivalent. Do not

scrub it with gasoline, volatile oil, etc.

● If an abnormal situation occurs, stop using the product and cut off the

power immediately.

● Keep the product clean. When the product is not in use, store it

properly.

● Keep the product out of the reach of children.

Safety Instructions

Warranty

We strive to build our products with the highest attention to detail and

craftsmanship. However, sometimes there are occurrences of defect.

We are happy to offer a one-year hassle-free warranty to all our

products as we continue to make amazing products. Please contact us

if you have any questions about our devices.

Letscom F-531 User manual

Letscom F-531 User manual

Related papers

Other documents