Brookstone iDesign Power Speaker User manual

STEREO FOR iPod

®

—PLUS CD PLAYER & RADIO

2-in-1 Music System

iDESIGN

®

1

TABLE OF CONTENTS

Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Location of Parts and Controls on Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12

Removal of Packing Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Remote Control Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-14

Subwoofer Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

AUX Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Video Output Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Headphone Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Compatible iPod Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18

Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Timer On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-20

Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22

Compact Disc Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-26

MP3 Disc Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-29

iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-31

CD Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Cleaning the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Resetting the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35

Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38

2

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.

THERE ARE NO SERVICEABLE PARTS INSIDE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

The lightning flash with arrow-head symbol within an equilateral triangle

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the unit’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read, adhered to and followed

before the unit is operated.

SAVE THESE INSTRUCTIONS

•

3

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read, adhered to and followed

before the unit is operated.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus outside or near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades, with one wider than the other. A grounding-

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where it exits from the apparatus.

Only use attachments/accessories specified by the manufacturer.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

4

PORTABLE CART WARNING

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, including if the power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

5

Note:

The apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on apparatus.

Main plug is used to disconnect device and it should remain readily operable

during intended use. In order to disconnect the apparatus from the power

completely, the main plug should be disconnected from the main socket

outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or

the like.

Excessive sound pressure from earphones and headphones can cause

hearing loss.

Press the unit's buttons gently, pressing them or the screen too hard may

cause damage to the unit.

Ensure that your earphones are inserted into the player before it is switched

on. Inserting them afterwards can potentially damage the earphones and

the player.

WARNING

Keep away from children. This is not a toy.

Use this unit only for its intended use as described in this manual.

Unplug this unit during lightning storms or when unused for long

periods of time.

Never drop or insert an object into any opening.

1.

2.

3.

4.

5.

6.

1.

2.

3.

4.

6

CAUTION

Danger of explosion if batteries are incorrectly replaced. Replace only with the

same or equivalent type.

Protect the power cord from being walked on or pinched, particularly at plug

outlets, convenience receptacles and the point where it exits the unit.

WARNING: This product may contain small parts which may pose a choking hazard

to children. This product is not a toy. Keep out of reach of children due to risk of

suffocation. This product may include components which may pose a strangulation

hazard to children.

BATTERY PRECAUTIONS

Dispose of the old batteries properly. Do not dispose of old batteries in a fire.

Do not leave batteries where a child or pet could play with or swallow them.

If a battery is swallowed, contact a physician immediately.

The batteries may explode if mistreated. Do not attempt to recharge or

disassemble the batteries.

Use only fresh batteries of the required size and type. Do not mix old and

new batteries, different types of batteries, or rechargeable batteries of

different capacities.

5.

•

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B

Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference received, including interference

that may cause undesired operation.

Modifications not authorized by the manufacturer may void the user’s authority

to operate this device.

•

7

WARNING

To protect your hearing, follow the below guidelines when using headphones.

Do not listen at an extremely high volume level. Extended high volume

listening can lead to permanent hearing loss.

Turn the volume down before listening to headphones. Once you begin

listening, adjust volume up to your desired sound level. This prevents

the headphones from suddenly activating at a high level.

Once you set the volume level, do not increase it. Over time, your ears

adapt to the volume level. So a volume level that does not cause

discomfort might still damage your hearing.

1.

2.

3.

8

9

LOCATION OF PARTS AND CONTROLS

LCD Display

Function Button

Preset/Folder + Button

Previous/Tuning — Button

Program Button

Play Mode Button

iPod Connector

Remote Sensor

Play/Pause/Band Button

CD Stop Button

Next/Tuning + Button

Volume + Button

Volume – Button

Aux-in Socket

Phone Jack (3.5mm)

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

CD Slot

Standby/On Button

Left Speaker

Right Speaker

CD Release Button

AM Antenna Socket

(AM Antenna included, not shown)

FM Antenna

Video Out Socket

Subwoofer Out Socket

Reset Switch

AC In Plug

AC Adapter (not shown)

8 iPod Dock Adapters (not shown)

Protective Cover (not shown)

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

10

LOCATION OF PARTS AND CONTROLS

11

LOCATION OF PARTS AND CONTROLS ON REMOTE

Standby/On Button

Play/Pause/Band Button

Next/Tuning + Button

Menu/ID3 Button

Timer/Sleep Button

Volume + Button

Volume – Button

CD Play/Stereo Button

Mute Button

Fol.up/N-up Button

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Prog/Clk Adj Button

EQ Button

Function Button

iPod Menu Down Button

Previous/Tuning — Button

CD Stop Button

CD Eject Button

iPod Menu Up Button

Infrared Transmitter

iPod Menu Enter Button

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

12

LOCATION OF PARTS AND CONTROLS ON REMOTE

REMOVAL OF PACKING MATERIALS

Remove all the accessories from the display package carefully. Verify that

you have all the necessary accessories before you dispose of the package.

Remove all the packing materials from the individual components. Do not

remove any labels or stickers on the back panels of the main unit.

REMOTE CONTROL BATTERY INSTALLATION

The remote control battery is already installed at the factory. To extend the life of the

original battery we have inserted a small clear plastic spacer tab between the lithium

battery and the battery terminal. You must pull this battery spacer tab out before you

use the remote control. If the remote control stops operating, replace the battery with

a new CR2025 3V lithium battery. To use the remote control, point it at the remote

sensor within a 16-foot range and at an angle of 60 degrees.

To access the battery compartment on the remote control:

Squeeze the notched tab while pulling the battery holder out.

Insert a CR2025 3V lithium battery. Make sure the battery is installed

according to the polarity indicators inside the compartment.

Slide the battery holder back into place.

CONNECTING

This system was designed to operate with AC 120V~60Hz power supply.

Connecting the unit to a power supply with different voltages could damage

the unit and also void your warranty.

1.

2.

3.

13

Unwind the AC power cord completely.

Insert the plug into any convenient AC outlet.

Once the unit is connected to the main supply, the unit will enter standby

mode. To turn the unit off completely, you must remove the main plug from

the AC outlet.

Please disconnect the main plug from the AC outlet if the device is not going

to be used for a long period of time.

SUBWOOFER CONNECTION

An external subwoofer speaker can be connected to the socket marked “Subwoofer”

on the rear of the main unit.

Connect one end of RCA cable (not included) to the SUBWOOFER output

socket, and the other side to your subwoofer (not supplied).

Press the STANDBY/ON button to switch the unit on and enjoy the music.

AUX CONNECTION

Connect a 3.5mm stereo jack lead (not included) to the AUX-IN jack

and the other end to your preferred device.

Press the FUNCTION button on the unit or on the remote control

to select AUX mode, “AUX” will be shown on the display.

Select the play function on the auxiliary device and the sound output

can then be heard from the unit.

1.

2.

3.

1.

2.

1.

2.

3.

14

VIDEO OUTPUT CONNECTION

The video output from certain iPod models can be output to a TV using the VIDEO

OUT jack. Connect one end of an RCA plug signal wire (not included) to the VIDEO

jack and the other end to your home TV. Please note that the jack on your TV must

be configured to accept input rather than output signals to enable this feature to

work correctly. For iPod nano, touch and classic, VIDEO OUT function is disabled by

default. iPod VIDEO OUT settings can be changed through menu “TV out option”.

HEADPHONE CONNECTION

You can use headphones (not included) to listen in privacy. Insert the headphone’s 3.5mm

plug into the PHONE jack. Use corresponding adapters if you have different plugs.

The unit’s speakers will mute automatically when headphones are plugged into the jack.

WARNING:

To protect your hearing, follow below guidelines when you use the headphones.

Do not listen at an extremely high volume level. Extended high volume

listening can lead to permanent hearing loss.

Turn the volume down before listening to headphones. Once you begin

listening, adjust volume up to your desired sound level. This prevents the

headphones from suddenly activating at a high level.

Once you set the volume level, do not increase it. Over time, your ears adapt

to the volume level. So a volume level that does not cause discomfort might

still damage your hearing.

1.

2.

3.

15

16

COMPATIBLE iPod MODELS

iPod touch (2nd generation)*

iPod touch (1st generation)*

iPod classic*

iPod with video (5th generation)

iPod nano (5th generation)*

iPod nano (4th generation)*

iPod nano (3rd generation)*

iPod nano (2nd generation)*

iPod nano (1st generation)

iPod with color display (4th generation)

iPod mini

*DOCK ADAPTER included

17

BASIC OPERATION

TURN THE UNIT ON/OFF

Press the STANDBY button on the main unit or remote control to turn the unit on.

The system will switch to the last selected source. The Power On indicator around the

STANDBY and CD RELEASE button will be lit. Press the STANDBY

button again

to power the unit off. The clock will be shown on the display.

SELECTING OPERATING MODE

Press the FUNCTION button on the main unit or remote control to select TUNER,

CD, iPod or AUX mode.

PLAY/PAUSE button

Press this button to begin playback or pause a CD. In Tuner mode, press this button

to select FM or AM.

STOP button

Press this button to stop the playback of a disc.

VOL — and VOL + buttons

Press repeatedly to adjust sound level output from 00 (minimum) to 40 (maximum).

MUTE button

Press this button to mute the sound output from the unit. “-MUTE-” will flash on the

display. Press the button again or press the volume control to resume the previous volume.

EQ button

Press this button to select one of the 5 preset sound equalizer settings.

They are FLAT, ROCK, CLASSIC, POP and JAZZ.

CD PLAY MODE/ST-MO button

Press the CD MODE/ST-MO to select repeat function in CD mode.

Press the CD PLAY MODE/ST-MO button in Tuner mode to switch

in between stereo and mono reception.

CLOCK SETTING

When the unit is plugged into a wall outlet for the first time, the display will show

“00:00” or “AM 12:00”. The unit should be in Standby mode to set the current time.

In Standby mode, press the PROG button on the unit or the remote control.

The hour digits “24H or 12H” will flash on the display.

Press the

or buttons on the unit or the remote control to change

to 24-hour or 12-hour time format.

Press the PROG button again, the hour digit will flash. Press

or

buttons on the unit or on the remote control repeatedly to select

the current hour.

Press the PROG button again, the minute digit will flash.

Press or buttons to select the current minute.

Press PROG button again to complete the setting of the current time.

1.

2.

3.

4.

5.

18

19

TURNING THE TIMER ON/OFF

In Standby mode, press the TIMER/SLEEP button on the remote control, the

and hour digit will flash on the display. Then press the or buttons

repeatedly to select the desired hour for timer. The

will disappear after an

hour, or when you switch to other modes or turn the unit off.

Press the TIMER/ SLEEP button again, the minute digit flashes. Then

press the or buttons repeatedly to select the desired minute,

for example “9:30”.

Press the TIMER/ SLEEP button, the iPod or TUNER or CD mode will flash

in the display. Press the

or buttons repeatedly to select the desired

mode. (Do not forget to place a disc into the CD compartment or iPod into

the iPod socket if your selected music source is CD or iPod)

Press the TIMER/ SLEEP button again, and the VOLUME digit will flash

on the display. Press the

or buttons repeatedly to select the

appropriate sound level.

To deactivate the Timer On function, press the TIME/SLEEP button until

the icon disappears on the display.

Pressing the TIMER/SLEEP button again will start a new setting.

Note: To make the unit switch on at a set time, the clock needs to be set

first before the timer can be used. During setting, if no button is pressed

within 90 seconds, the system will exit Timer Setting mode automatically.

The unit will automatically turn off after 60 minutes if the unit is turned on

by the Timer On function.

1.

2.

3.

4.

5.

6.

•

Page is loading ...

Brookstone iDesign Power Speaker User manual

Brookstone iDesign Power Speaker User manual

Related papers

Other documents