AIC XC-12G Installation guide

AIC
Brand
AIC
Model
XC-12G
Type
Installation guide
XC-12G HDD Canister
Quick Installation Guide
Document Number : QIG-00009-B
P/N : H88CM12001-00002-1
Front Panel Indicators
Backplane Settings
HDD Power LED (Behavior: power-on: blue/active: blink)
HDD Failed LED (Behavior: red)
Installing HDD
Install 2.5” Hot-swap HDD
A. Release a drive tray by pressing the unlock button and pinching the lock lever
slightly and pulling out the drive tray.
B.
Place the 2.5”HDD on the tray and then secure it with four screws on the bottom.
Insert the drive carrier into its bay.Push the tray lever until it clicks.
A B
J2 : SAS HDD Receptacle Connector-HDD1
J6 : SAS HDD Receptacle Connector-HDD2
D12 & D13 : HDD1/2 Preset/Activity LED [blue]
D11 & D14 : HDD1/2 Fault LED[red]
(SAS/SATA) J1: HDD1 port A
J4: HDD1 port B (SAS)
J5: (SAS/SATA) HDD2 port A
J8: (SAS) HDD2 port B
J3: HDD1 pin LED header
J7: HDD2 LED pin header
JP1 : PWR Input connector
Pin Descripon Pin Descripon
1 2
3 4
5 6
HDD1 Fault LED(-) HDD Fault LED input- Low acve
LED(+) GND
HDD1 Acvity LED(+) HDD Acvity LED output acve
Pin Descripon Pin Descripon
1 2
3 4
+12V
GND
GND
+5V
Pin Descripon Pin Descripon
1 2
3 4
5 6
HDD2 Fault LED(-) HDD Fault LED input- Low acve
LED(+) GND
HDD2 Acvity LED(+) HDD Acvity LED output acve
  • Page 1 1

AIC XC-12G Installation guide

AIC
Brand
AIC
Model
XC-12G
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents