iSMA CONTROLLI MVT203SPS107 230Vac 300N Installation guide

Brand
iSMA CONTROLLI
Model
MVT203SPS107 230Vac 300N
Type
Installation guide

This manual is also suitable for

www.ismacontrolli.com
The performances stated in this sheet can be modifi ed without any prior notice.
page 1DIM232en | 1st Issue rev. 1 | 07/2022
MVT2xx / MVT4xx
Floating Actuator
MOUNTING INSTRUCTIONS
For models MVT2xx pay attention to 230 V AC voltage. Do not use the actuator if not coupled with the valve.
WIRING DIAGRAMS
ON-OFF Connection 3-point Connection
REPLACEMENT OF 3-POINT ON/OFF MV T28/44
ATTENTION! In the 3-point ON/OFF MVT28/44 actuators to be replaced, the common wire is white, while in the new actua-
tors it is BROWN (look at the scheme above).
INSTALL ATION
Use manual override to set the spindle in the installation
position.
www.ismacontrolli.com
iSMA CONTROLLI S.p.A. - Via Carlo Levi 52, 16010 Sant’Olcese (GE) - Italy | [email protected]
page 2DIM232en | 1st Issue rev. 1 | 07/2022
MVTxxxS MVTxxx
Set the actuator spindle in the retract position. Align actuator spindle slot with the hole in locknut (A) , se-
cure with bolt (B) through non threaded hole in locknut (A)
  • Page 1 1
  • Page 2 2

iSMA CONTROLLI MVT203SPS107 230Vac 300N Installation guide

Brand
iSMA CONTROLLI
Model
MVT203SPS107 230Vac 300N
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents