Western Headlamp Extension Bracket Kit #68210 Parts List & Installation Instructions

Western
Brand
Western
Model
Headlamp Extension Bracket Kit #68210
Category
Wall & ceiling mounts accessories
Type
Parts List & Installation Instructions
68210
A DIVISION OF DOUGLAS DYNAMICS, LLC
Headlamp Extension Bracket Kit
PARTS LIST
November 15, 2014
Lit. No. 68214, Rev. 00
Lift Fram
e
1
4
2
3
68210 Headlamp Extension Bracket Kit
Item Part Qty Description Item Part Qty Description
1 1 Headlamp Extension Bracket – DS 3 4 1/2-13 Hex Locknut GB
ns 1 Headlamp Extension Bracket – PS 4 2 1/2 Hardened Flat Washer
2 4 1/2-13 x 1-1/4 Hex Cap Screw G5
DS = Driver's Side PS = Passenger's Side ns = not shown G = Grade
CAUTION
Use standard methods and practices
when attaching snowplow and installing
accessories, including proper personal
protective safety equipment.
CAUTION
Read this document before installing the
Headlamp Extension Bracket.
68210
Lit. No. 68214, Rev. 02 2 November 15, 2014
Copyright © 2014 Douglas Dynamics, LLC. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any
printed, mechanical, electronic, lm or other distribution and storage media, without the written consent of the company. Authorization to
photocopy items for internal or personal use by the company's outlets or snowplow owner is granted.
The company reserves the right under its product improvement policy to change construction or design details and furnish equipment when
so altered without reference to illustrations or specications used. This equipment manufacturer or the vehicle manufacturer may require or
recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. The company offers a limited warranty for
all snowplows and accessories. See separately printed page for this important information.
Printed in U.S.A.
INSTALLATION INSTRUCTIONS
1. Park the vehicle on a smooth, level, hard surface,
such as concrete. Lower the blade to the ground,
and turn the control OFF. Turn the vehicle ignition
to the "OFF" position and remove the key.
2. Follow the instructions included with the headgear
kit until instructed to install the headlamps. Install
the headlamp extension brackets as instructed in
Steps 3–5 before attaching the headlamps.
3. Attach the headlamp extension brackets to the
headgear light brackets as shown, using the
1/2" x 1-1/4"cap screws included with this kit.
4. On each side, place one 1/2" washer on the cap
screw that inserts into the slotted holes in the
extension bracket and lift frame.
5. Attach a 1/2" locknut to each cap screw, and fully
tighten the extension bracket fasteners to 75 ft-lb.
6. Complete headlamp installation as instructed in
the headgear kit instructions.
  • Page 1 1
  • Page 2 2

Western Headlamp Extension Bracket Kit #68210 Parts List & Installation Instructions

Western
Brand
Western
Model
Headlamp Extension Bracket Kit #68210
Category
Wall & ceiling mounts accessories
Type
Parts List & Installation Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers