Sunbeam FA7400 User manual

Brand: Sunbeam

Model: FA7400

Category: Household fans

Type: User manual

This manual is also suitable for

Fan FA7400

Sunbeam Fan FA7400 is a powerful and versatile tower fan that will help you stay cool and comfortable all summer long. With its 3-speed settings, you can customize the airflow to your liking. The fan also features a unique nature mode that simulates the natural rise and fall of the wind, creating a more comfortable environment. Additionally, the sleep mode gradually decreases the fan speed over time, allowing you to drift off to sleep in peace and quiet.

MARKETING

CREATIVE

PRINTING

DIGITAL& POS

19-21 Phillips Road Kogarah NSW 2217

T 02 9588 3655 F 02 9587 6741

P PO Box 447 Ramsgate NSW 2217

W visionmediagroup.com.au

E [email protected]

is a registered trademark.

Need help with your appliance?

Contact our customer service team or visit

our website for information and tips on

getting the most from your appliance.

In Australia

Visit www.sunbeam.com.au

Or call 1300 881 861

In New Zealand

Visit www.sunbeam.co.nz

Or call 0800 786 232

Made in China.

Due to minor changes in design or otherwise,

the product may differ from the one shown in this leaflet.

Sunbeam Corporation Limited 2010.

ABN 45 000 006 771

Units 5 & 6, 13 Lord Street

Botany NSW 2019 Australia

Unit 3, Building D

26 Vestey Drive

Mt Wellington Auckland

New Zealand

Sunbeam Corporation is a division of GUD Holdings Ltd.

6/11

Sunbeam Remote Controlled

Summit Tower Fan

Instruction Booklet

FA7400 115cm Remote Controlled Tower Fan

Please read these instructions carefully

and retain for future reference.

In the unlikely event that this appliance develops any malfunction

within 2 years of purchase (3 months commercial use) due to

faulty materials or manufacture, we will replace it for you

free of charge.

2 Year Replacement Guarantee

Shouldyouexperienceanydifficulties

with your appliance, please phone our

customerservicelineforadviceon1300

881861inAustralia,or0800786232

inNewZealand.Alternatively,youcan

send a written claim to Sunbeam at the

address listed below. On receipt of your

claim, Sunbeam will seek to resolve your

difficulties or, if the appliance is defective,

advise you on how to obtain a replacement

or refund.

YourSunbeam2YearReplacement

Guarantee naturally does not cover misuse

or negligent handling and normal wear and

tear.

Similarlyyour2YearReplacement

Guarantee does not cover freight or any

other costs incurred in making a claim.

Please retain your receipt as proof of

purchase.

InAustralia,thebenefitsgiventoyouby

this guarantee are in addition to your other

rights and remedies under any laws which

relate to the appliance.

Our goods come with guarantees that

cannotbeexcludedundertheAustralian

Consumer Law. You are entitled to a

replacementorrefundforamajorfailure

and for compensation for any other

reasonably foreseeable loss or damage.

You are also entitled to have the goods

repaired or replaced if the goods fail to be

of acceptable quality and the failure does

notamounttoamajorfailure.

Should your appliance require repair or

service after the guarantee period, contact

your nearest Sunbeam service centre.

ForacompletelistofSunbeam’s

authorised service centres visit our website

or call:

Australia

www.sunbeam.com.au

1300881861

Units 5 & 6, 13 Lord Street

Botany NSW 2019 Australia

New Zealand

www.sunbeam.co.nz

0800786232

26 Vestey Drive, Mt Wellington

Auckland, New Zealand

Important instructions – retain for

future use.

Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 1 - Jul 20, 2011 2:01:54 PM

MARKETING

CREATIVE

PRINTING

DIGITAL& POS

19-21 Phillips Road Kogarah NSW 2217

T 02 9588 3655 F 02 9587 6741

P PO Box 447 Ramsgate NSW 2217

W visionmediagroup.com.au

E [email protected]

Care and cleaning

Ensure that your fan is switched off and

disconnected from the power outlet before

cleaning.

•Carefullywipeyourfanusingacleancloth.

Donotuseabrasivecleanersorbrushesto

clean the appliance as these may scratch the

surface.

•Takecarethatexcessivedustdoesnotbuild

up in the air-intake and air-outlet grill, and

clean it occasionally using a dry brush or

vacuum cleaner.

•Storethefaninacooldryplacewhennotin

use, in its original carton if possible.

Troubleshooting guide

If your tower fan fails to operate check the

following:

• Makesuretheelectricaloutletorcircuit

breaker is working.

• Checkforobstructionsaroundtheairintake

grill.

If your remote control fails to operate check the

following:

• Ensurethatyoupointtheremotetowardsthe

front of the fan.

• Checkthatthebatteriesarenotworn.

Replaceifnecessary.

Sunbeams Safety Precautions 1

Safety Precautions For Your Tower Fan 2

Locating Your Tower Fan 3

Features of Your Tower Fan 4

Illuminated Display Screen 5

Remote Control 5

Assembling Your Tower Fan 6

Using Your Tower Fan 8

Troubleshooting Guide 11

Care And Cleaning 11

Contents

Using your Tower fan (continued)

Nature mode

Naturemodeprovidesanextralevelof

comfort by simulating the natural rise and

fall of the wind over time. You can use this

mode on any fan speed setting.

TouseNaturemode:

1. Choose a fan speed.

2. Press the

mode

button on either the

towerortheremote.The

will illuminate

on the display screen.

Thefanwillnowvaryitsspeedeveryfew

seconds between the chosen fan speed, each

lowerfanspeed,andoff.Forexample,ifyou

set the fan speed to medium, the actual fan

speed will alternate between medium, low

andoff.TocancelNaturemode,Pressthe

mode

button on either the tower control

panel or the remote until the light is no

longer illuminated on the display screen.

Sleep mode

SleepmodeisidenticaltoNaturemodewith

the added advantage that the highest fan

speedgraduallydecreasesovertime.This

allows you to turn the fan on a high speed

setting last thing at night, knowing that by

the time you are asleep, the fan has switched

itself down to a slower speed.

TouseSleepmode:

1. Choose a fan speed.

2. Press the

mode

button on either the

tower control panel or the remote until the

illuminates on the display screen.

Thefanwillnowoperateinthesamemanner

aswithNaturemode,exceptthatafter30

minutes,themaximumspeedwilldecrease.

Eventually in this mode, the fan switches

down to low speed and alternates between

low and off.

TocancelSleepmode,Pressthe

mode

button on either the tower control panel or

the remote until the

light is no longer

illuminated.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam is very safety conscious when

designing and manufacturing consumer products,

but it is essential that the product user also

exercise care when using an electrical appliance.

Listed below are precautions which are essential

for the safe use of an electrical appliance:

• Readcarefullyandsavealltheinstructions

provided with an appliance.

• Alwaysturnthepoweroffatthepoweroutlet

beforeyouinsertorremoveaplug.Remove

by grasping the plug - do not pull on the cord.

• Turnthepoweroffandremovetheplug

when the appliance is not in use and

before cleaning.

• Donotuseyourappliancewithanextension

cord unless this cord has been checked

and tested by a qualified technician or

service person.

• Alwaysuseyourappliancefromapower

outletofthevoltage(A.C.only)marked

on the appliance.

• Thisapplianceisnotintendedforuseby

persons(includingchildren)withreduced

physical, sensory or mental capabilities, or

lackofexperienceandknowledge,unlessthey

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

• Childrenshouldbesupervisedtoensurethat

they do not play with the appliance.

• Thetemperatureofaccessiblesurfacesmaybe

high when the appliance is operating.

• Neverleaveanapplianceunattendedwhile

in use.

• Donotuseanapplianceforanypurpose

other than its intended use.

• Donotplaceanapplianceonornearahotgas

flame, electric element or on a heated oven.

• Donotplaceontopofanyotherappliance.

• Donotletthepowercordofanappliancehang

over the edge of a table or bench top or touch

any hot surface.

• Donotoperateanyelectricalappliancewith

a damaged cord or after the appliance has

been damaged in any manner. If damage is

suspected, return the appliance to the nearest

SunbeamAppointedServiceCentre

forexamination,repairoradjustment.

• Foradditionalprotection,Sunbeam

recommend the use of a residual current

device(RCD)withatrippingcurrentnot

exceeding30mAintheelectricalcircuit

supplying power to your appliances.

• Donotimmersetheapplianceinwater

or any other liquid unless recommended.

•Appliancesarenotintendedtobeoperated

bymeansofanexternaltimerorseparate

remote control system.

•Thisapplianceisintendedtobeusedin

household and similar applications such

as: staff kitchen areas in shops, offices and

other working environments; farm houses; by

clients in hotels, motels and other residential

type environments; bed and breakfast type

environments.

Sunbeam’s Safety Precautions

Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 2 - Jul 20, 2011 2:01:54 PM

MARKETING

CREATIVE

PRINTING

DIGITAL& POS

19-21 Phillips Road Kogarah NSW 2217

T 02 9588 3655 F 02 9587 6741

P PO Box 447 Ramsgate NSW 2217

W visionmediagroup.com.au

E [email protected]

Using your Tower fan (continued)

Using the remote control

1.Removetheremotecontrolfromits

compartment at the top of the tower by

applying downward pressure to the bottom

of the remote as shown.

2. Point the remote towards the control panel

on the front of the tower to operate.

TIMER

MODE

ON/OFF

OSC

ION

MODE

TIMER

SPEED

SWING

ION

Changing the batteries

1. Open the rear cover off the remote control

unit.

2.Replacethespentbatterieswith2fresh

AAAbatteriesasshown.

3.Replacetherearcover.

Using the oscillation function

The70degreeoscillationfunctioncanbe

used on any setting.

1.Turntheunitonandselectanyfanspeed.

2. Press the

button on the tower control

panelortheremote.The'osc'iconwill

illuminate and the fan will begin to

oscillate from side to side.

Tostopthefanfromoscillating,simplypress

the button

once again.

Using the auto off timer

Theautoofftimerautomaticallyswitchesthe

fanoffafterapresetnumberofhours.To

activate this feature, simply press the auto

off timer button

on the tower control

panel or on the remote control unit.

1. Press the auto off timer button once to

switch the fan off after 1 hour.

2. Each subsequent press of the auto off

timer button will increase the number

of hours the fan will run before turning

off automatically by 1 hour increments.

Thedisplayscreenwillshowthenumber

of hours left before the fan turns off

automatically.

Tocancelthesetting,keeppressingthe

auto off button until it cycles past 12 hours,

to zero. It will then automatically return to

its normal setting displaying the ambient

roomtemperature.Theautoofftimerwillbe

deactivated and the fan will remain on until

it is switched off manually.

•Donotuseoutdoors.

•Donotrunthecordofthefanundercarpeting.

Donotcoverthecordwiththrowrugs,runners

orotherfloorcoverings.Arrangethecordaway

from traffic areas so that it will not be tripped

over.

•Donotusethisfanintheimmediatesurrounds

of a bath, shower, laundry area or swimming

pool.

•Besurethefanisplacedonadry,even

surface.Donotuseonsoftsurfaces,suchas

beds, where opening may become blocked.

•Keepyourfanawayfromheatsources,

corrosive gases and avoid direct sunlight.

•Thisfanisonlytobeusedwiththebasefitted

and in good condition.

•Disconnectthepowerplugbeforedismantling,

assembling or before cleaning.

•Alwaysunplugthefanwhennotinuseforany

long length of time.

•Thefanmustnotbeusediftheguardsare

damaged in any way.

•Donotinsertorallowforeignobjectstoenter

anyventilationorexhaustopeningsasthismay

cause electric shock or fi re, or damage to the

fan.

•Neverinsertfingers,pencilsoranyother

objectsthroughtheguardswheneverthepower

plug is connected, especially while running.

•Avoidtouchingmobilepartsofthefan.

•Donotattempttomoveyourfanwhilstitis

operating. If your fan needs to be moved,

please ensure that it is turned off and you use

the carry handle on top of the tower.

•Whenscrappingthefanattheendofitsuseful

life, follow local regulations.

Safety Precautions For

Your Tower Fan

Using Your Tower Fan

Switching the fan on

1. Place the fan on a flat level surface.

2.Inserttheplugintoa230/240Vpower

outlet and turn the power on.

3.Pressthepowerbutton

4. Press the fan speed button

to select

low, medium or high depending on your

preference.

Switching the fan off

• Toswitchthefanoff,simplypressthe

power button

•Ifyouwillnotbeusingthefanforalength

of time, it is advisable to turn the power

off at the wall socket and unplug the power

cord.

Selecting a fan speed setting

YourSunbeamtowerfanhas3speedsettings

as follows:

• lowspeed Displayscreenshows

2 vertical bars

•mediumspeed Displayscreenshows

4 vertical bars

•highspeed Displayscreenshows

6 vertical bars

Toselectafanspeed,simplypressthe

fan speed button

on the tower or the

remote. Each press of the button will

increase the fan speed and then return

back to the lowest speed again.

Locating Your Tower Fan

1.Alwayslocateyourfanonaflatlevel

surface.

2. Your tower fan should be located in a dry,

cool,wellventilatedlocation.Keepyour

fan away from heat sources, corrosive gases

and avoid direct sunlight.

3.Donotattempttomoveyourtowerfan

whilst it is operating. If your fan needs to

be moved, please ensure that it is turned

off and you use the carry handle at the rear

of the fan.

Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 3 - Jul 20, 2011 2:01:54 PM

MARKETING

CREATIVE

PRINTING

DIGITAL& POS

19-21 Phillips Road Kogarah NSW 2217

T 02 9588 3655 F 02 9587 6741

P PO Box 447 Ramsgate NSW 2217

W visionmediagroup.com.au

E [email protected]

Assembling your Tower fan (continued)

Join the tower to the base

1. Ensure power cord is unplugged.

2.Turnthetowerupsidedown.

3.Alignthebaseandthebottomofthetower

so that the two bosses on the base line up

with the large holes in the bottom of the

tower as shown. Ensure the power cord is

sitting in the cord track in the base.

4. Push the base down into the bottom of the

tower until is firmly held into position.

Screw the tower to the base

1. Use the 4 screws to secure the tower to

the base.

2. Stand the fan upright. It is now ready

for use.

Figure2

Figure3

Figure4

Features Of Your Sunbeam

Tower Fan

Remote control storage

Whennotinuse,storeyourremotecontrolin

the handy storage compartment on the top of

the fan body.

Illuminated Display Screen

Theilluminateddisplayscreenshowscurrent

settings and the ambient room temperature.

Carry handle

Convenient carry handle allows you to easily

carry your fan from room to room.

Tower Control panel

Thetowercontrolpanelallowsyoutoadjust

fan settings at the touch of a button.

air-outlet grill

air-intake grill

Join the two halves of the base together

Clip the two halves of the base together.

Assembling Your Tower Fan

Figure1

Remote Control

Adjust the fan settings from anywhere in the room using the full function remote control.

Nature and Sleep mode

Whenusedinnature

mode, the fan speed is

randomlyadjusted,giving

the feeling of a natural

breeze.

Sleep mode is designed

to be used when retiring

to bed; the fan speed is

gradually decreased until

the unit is operating on low

speed, and when used in

conjunctionwiththeauto

off timer, will ultimately

switch the unit off.

Fan speed button

Choosefrom3speed

settings, low, medium or

high.

Auto Off Timer button

Theautoofftimerallowsyou

to set your tower fan to turn

off after 1-12 hours.

Ionising Function Button

Whenturnedon,theion

generator releases negative

ions into the air.

Oscillation

Your tower fan oscillates

70°,distributingcoolair

throughout the room.

Power on/off button

Illuminated Display Screen

029

MODE

SPEED

osc

Ionizer

Oscillation Fan Speed

Nature

Wind Mode

Ambient Room

Temperature

and Timer

Sleep

Wind Mode

Black PANTONE 186 C FA7400_FA7400 Fan - Work-and-turn - Press Sheet 4 - Jul 20, 2011 2:01:54 PM

Sunbeam FA7400 User manual

Brand: Sunbeam

Model: FA7400

Category: Household fans

Type: User manual

This manual is also suitable for

Fan FA7400

Download PDF

report

Sunbeam FA7400 User manual

This manual is also suitable for

Sunbeam FA7400 User manual

Related papers

Other documents